Call 08048264541 90% Response Rate

Send Email

AIR TOOLS KOBE MAKE

KOBE MAKE  AIR TOOLS -DRIIS / GRINDERS 

 
Air Tools

All Kobe automotive and industrial air tools have an ergonomic and well balanced design which results in less physical load, dust, noise and vibrations. All these factors lead to reduced operator fatigue which in turn leads to faster and more efficient production.

Extended Spindle Die Grinder
  • Extended Spindle Die Grinder
  • Extended Spindle Die Grinder
  • Extended Spindle Die Grinder
  • Extended Spindle Die Grinder

Extended Spindle Die Grinder

Product Price: Rs 1,000 / PieceGet Best Price

Product Brochure

Product Details:
Model Name/NumberModel : GES2506L ORDER NO- KBE-270-2040N
Weight850 GRAM
Wheel Diameter6 inch, 4 inch, 8 inch, 7 inch, 5 inch
Air Pressure50-100 psi, <50 psi
No Load Speed10000 to 15000 rpm, <3000 rpm, 3000 to 10000 rpm
Spindle Size5/16
Air Consumption10 to 20 cfm, <10 cfm, 20 to 50 cfm
Air Inlet1/4
BrandKobe
EXTENDED SPINDLE DIE GRINDER MODEL NO- GES 2506L 6mm KOBE

MODEL NO- GES 2506L / Order Code:KBE2702040N

Kobe™ Extended Spindle Die Grinder
GES2506L For extra reach in "hard to get at" areas, extended spindle housing allowing two-handed operation, rear exhaust, safety lever throttle.
Specifications:1/4" NPT air inlet thread for 10mm air hose.90PSI air pressure.4CFM* air consumption. Overall length: 248mm. Collet size: 6mm.
*Based on a 15 second cycle per minute average use.Special Delivery and Collection

DescriptionKobe KBE2702040N GES2506L 6mm EXTENDED SPINDLE DIE GRINDER

GES2506L Extended Spindle Die Grinder

GES2506L
For extra reach in “hard to get at” areas, extended spindle housing allowing two-handed operation, rear exhaust, safety lever throttle.

Collet size: 6mm.
Air inlet thread: 1/4″ NPT.
Minimum air hose size (ID): 10mm (3/8″).
Air pressure: 90psi.
Air consumption: 4cfm*.
Sound pressure level: 93dBA.
Sound power level: 103dBA.
Vibration level: 5.4m/s2.
Overall length: 248mm.

*Based on a 15 second cycle per minute average use.

 

Specification
PROPERTYVALUE
Brand Kobe Red Line
EAN13 Barcode 5036140089136
eCl@ss Code 21060900
Free Speed 25000 rpm
Overall Depth 50
Overall Length 280
Overall Weight 0.875
Overall Width 80
Supplier Part No. 2702040N
UNSPSC Code 27131511
Weight Each 850 g
Further Information
PROPERTYVALUE
Collet Size 6.35 mm millimetre 1/4 in. inch
Material Aluminium
Overall Height 57 mm millimetre in. inch
Overall Length 246 mm millimetre in. inch
Overall Width 34 mm millimetre in. inch
Product Number GES2506L
Type Air Extended Die Grinder
Weight 850 g gram 0.85 kg kilogram
Includes Collet Spanners
Horsepower 0.5 hp horsepower
Maximum No Load Speed 25,000 rpm revolutions per minute
Air Pressure 90 PSI pounds per square inch
Air Consumption 4 CFM cubic feet per minute L/min litres per minute
Throttle Features Safety Release Throttle
Air Inlet Size 1/4NPT
Compatible Hose Inner Diameter 10 mm millimetre
Grinder Orientation Straight
Grinder Angle ° degree
Speed Features Single Speed
Exhaust Location Front
Compatible Wheel Diameter mm millimetre in. inch
Manufacturer Guarantee
Noise/ Vibration Information
Get Best QuoteRequest A Callback
Angle Grinder Pneumatic Heavy Duty Model No Ga1807l Kobe
  • Angle Grinder Pneumatic Heavy Duty Model No Ga1807l Kobe
  • Angle Grinder Pneumatic Heavy Duty Model No Ga1807l Kobe
  • Angle Grinder Pneumatic Heavy Duty Model No Ga1807l Kobe
  • Angle Grinder Pneumatic Heavy Duty Model No Ga1807l Kobe
  • Angle Grinder Pneumatic Heavy Duty Model No Ga1807l Kobe
  • Angle Grinder Pneumatic Heavy Duty Model No Ga1807l Kobe
  • Angle Grinder Pneumatic Heavy Duty Model No Ga1807l Kobe
  • Angle Grinder Pneumatic Heavy Duty Model No Ga1807l Kobe
  • Angle Grinder Pneumatic Heavy Duty Model No Ga1807l Kobe
  • Angle Grinder Pneumatic Heavy Duty Model No Ga1807l Kobe
  • Angle Grinder Pneumatic Heavy Duty Model No Ga1807l Kobe
  • Angle Grinder Pneumatic Heavy Duty Model No Ga1807l Kobe
  • Angle Grinder Pneumatic Heavy Duty Model No Ga1807l Kobe

Angle Grinder Pneumatic Heavy Duty Model No Ga1807l Kobe

Product Price: Rs 999 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Model Name/NumberGA 1807l Kobe
WeightSTD
Air Pressure<50 psi
Wheel Diameter4 inch, 8 inch, 5 inch, 7 inch, 6 inch
Type of GrinderDie, Pencil, Angle, Straight
Air Consumption10 to 20 cfm, <10 cfm, 20 to 50 cfm
Air Inlet1/4, 1/4", 1/2"
BrandKobe
Warranty6 months

Item Code: KBE2702070R

 Angle Grinder 180mm Heavy Duty KOBE MAKE 

MODEL NO- GA1807L / Item Code: KBE2702070R
Supplied with front exhaust, safety lever throttle, auxiliary side handle and adjustable safety guard. For grinding only
Free speed: 7000rpm.
Grinding disc size: 180x6.3x22.2mm.
Air inlet thread: 1/4" NPT.
Air hose size (ID): 10mm.
Air pressure: 90PSI.
Air consumption: 6,1/2 CFM*
Overall length: 340mm.
Weight: 3.6kg.
Sound power level: 109dB(A).
Sound Pressure/ Noise level: 103dB(A).
Vibration level: 2.6m/s.

Get Best QuoteRequest A Callback
Angle Die Grinder Model No-GDA 2206L Kobe Make
  • Angle Die Grinder Model No-GDA 2206L Kobe Make
  • Angle Die Grinder Model No-GDA 2206L Kobe Make
  • Angle Die Grinder Model No-GDA 2206L Kobe Make
  • Angle Die Grinder Model No-GDA 2206L Kobe Make
  • Angle Die Grinder Model No-GDA 2206L Kobe Make
  • Angle Die Grinder Model No-GDA 2206L Kobe Make
  • Angle Die Grinder Model No-GDA 2206L Kobe Make
  • Angle Die Grinder Model No-GDA 2206L Kobe Make
  • Angle Die Grinder Model No-GDA 2206L Kobe Make
  • Angle Die Grinder Model No-GDA 2206L Kobe Make
  • Angle Die Grinder Model No-GDA 2206L Kobe Make
  • Angle Die Grinder Model No-GDA 2206L Kobe Make
  • Angle Die Grinder Model No-GDA 2206L Kobe Make

Angle Die Grinder Model No-GDA 2206L Kobe Make

Product Price: Rs 1,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Model Name/NumberGDA 2206l Kobe Make
Warranty6 months
No Load SpeedSTD
WeightSTD
Air Pressure<50 psi
Wheel Diameter7 inch, 6 inch, 5 inch, 4 inch, 8 inch
BrandKobe
Air Inlet1/4", 1/2"
ANGLE DIE GRINDER MODEL NO-GDA 2206L KOBE MAKE

MODEL NO-GDA 2206L / Order Code:KBE2702020H


Kobe 90degree Angle Die Grinder

GDA2206L
Safety lever throttle, reverse exhaust, Ideal for polishing, grinding and buffing, suitable for use in confined areas.
Free speed: 22,000rpm.
Air inlet thread: 1/4" NPT.
Minimum air hose size: 3/8" (10mm).
Air pressure: 90psi/6.2bar.
Air consumption: 4cfm*.
Noise Level: 85dBA
Sound Power: 99dBA
Vibration: 7.0m/s
Collet size: 6mm.
Overall length: 160mm.

*Based on a 15 second cycle per minute average use
Get Best QuoteRequest A Callback
Air Impact Wrench Size- 1/2 Model No I W 500 Kobe Make
  • Air Impact Wrench Size- 1/2 Model No I W 500 Kobe Make
  • Air Impact Wrench Size- 1/2 Model No I W 500 Kobe Make
  • Air Impact Wrench Size- 1/2 Model No I W 500 Kobe Make
  • Air Impact Wrench Size- 1/2 Model No I W 500 Kobe Make
  • Air Impact Wrench Size- 1/2 Model No I W 500 Kobe Make
  • Air Impact Wrench Size- 1/2 Model No I W 500 Kobe Make
  • Air Impact Wrench Size- 1/2 Model No I W 500 Kobe Make
  • Air Impact Wrench Size- 1/2 Model No I W 500 Kobe Make
  • Air Impact Wrench Size- 1/2 Model No I W 500 Kobe Make
  • Air Impact Wrench Size- 1/2 Model No I W 500 Kobe Make
  • Air Impact Wrench Size- 1/2 Model No I W 500 Kobe Make
  • Air Impact Wrench Size- 1/2 Model No I W 500 Kobe Make

Air Impact Wrench Size- 1/2 Model No I W 500 Kobe Make

Product Price: Rs 1,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Type Of ProductAir Impact Wrench
Types Of ScrewdriverAir Impact Wrench
Model Name/NumberModel No I W 500 Kobe Make
Warranty6 months
Air Consumption<5
Air Pressure100-120 psi, >120 psi, <50 psi, 50-100 psi
Air Inlet1/4", 1/8 "
BrandKobe

Air Impact Wrench SIZE- 1/2" MODEL NO I W 500 Kobe MAKE

ORDER CODE NO -KBE-270-2316P

Suitable for the rapid removal or installation of threaded fasteners. The housing is manufactured from a single piece of aluminum, for increased strength and durability. The housing has a rubber shroud around the square drive to protect the surface of the work piece from accidentally impacts and a rear bumper to protect the tool when it?s not in use. Reverse gear is selected easily at the press of a button conveniently located above the 10 position throttle control. The short body length allows access into hard to reach areas.One piece aluminum housing, 10 position power regulator and thumb switch for reversing.
Specifications: Bolt capacity: 16mm. Torque: 325 Nm. Air inlet thread: 1/4" NPT. Air hose size (ID): 8mm. Air pressure: 90PSI. Air consumption: 4CFM*. Overall length: 191mm. Weight: 2.4kg. Noise level: 88dB(A). Vibration: 4.2m/s2. For a complete range of 1/2' drive impact sockets see product group KEN-583.
*Based on 15 second cycle per minute average use.

Get Best QuoteRequest A Callback
Air Screwdriver Kit Straight Model No-SS -1525K 1/4 KOBE MAKE
  • Air Screwdriver Kit Straight Model No-SS -1525K 1/4 KOBE MAKE
  • Air Screwdriver Kit Straight Model No-SS -1525K 1/4 KOBE MAKE
  • Air Screwdriver Kit Straight Model No-SS -1525K 1/4 KOBE MAKE
  • Air Screwdriver Kit Straight Model No-SS -1525K 1/4 KOBE MAKE
  • Air Screwdriver Kit Straight Model No-SS -1525K 1/4 KOBE MAKE
  • Air Screwdriver Kit Straight Model No-SS -1525K 1/4 KOBE MAKE
  • Air Screwdriver Kit Straight Model No-SS -1525K 1/4 KOBE MAKE
  • Air Screwdriver Kit Straight Model No-SS -1525K 1/4 KOBE MAKE
  • Air Screwdriver Kit Straight Model No-SS -1525K 1/4 KOBE MAKE
  • Air Screwdriver Kit Straight Model No-SS -1525K 1/4 KOBE MAKE

Air Screwdriver Kit Straight Model No-SS -1525K 1/4 KOBE MAKE

Product Price: Rs 10,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Type Of ProductAir Screwdriver Kit Straight
Types Of ScrewdriverAir Screwdriver Kit Straight
Model Name/Number-SS -1525k 1/4
Air Consumption<5, 6 to 7, 5 to 6
Storage Tank Material(SS)STD
Working Torque Range NmSTD
Nominal Bolt Size CapacitySTD
Air Pressure<50 psi, 50-100 psi
Air Inlet1/4
BrandKobe
Warranty6 months

AIR SCREWDRIVER KIT STRAIGHT MODEL NO-SS-1525K 1/4" KOBE MAKE

MODEL NO-SS-1525K 1/4" / Order Code:KBE2703800K

Kobe™ Straight Screwdriver Kit

DescriptionKobe KBE2703800K SS1525K 1/4″ STRAIGHT AIRSCREWDRIVER KIT

SS1525K – Straight Air Screwdriver Kit

SS1525K
1/4″ NPT air inlet thread for 10mm air hose, 90PSI air pressure, 4cfm* air consumption, 10 – 30lbs/inch torque. 1/4″ hex drive capacity.

Sound pressure level: 90dBA.
Sound power level: 104dBA.
Vibration level: 3.2m/s2.
Overall length: 210mm.

Contents:
SS1525 screwdriver.
Two clutch springs:
Clutch Spring No.06-703-13 Dia 2.3mm; 1Nm – 3Nm
Clutch Spring No.06-703-23 Dia 1.8mm; 0.3Nm – 0.7Nm
2x spanners.
Clutch adjusting wrench.
1/4 NPT nipple.
Mini oil bottle.
No.1 x 65mm crosspoint double ended bit.
5 x 50mm slotted bit.

*Based on a 15 second cycle per minute average use.

 

Specification
PROPERTYVALUE
Brand Kobe Red Line
EAN13 Barcode 5036140089389
eCl@ss Code 21060000
Free Speed 1700 rpm
Overall Depth 60
Overall Length 220
Overall Weight 1.18
Overall Width 200
Supplier Part No. 2703800K
UNSPSC Code 27131502
Weight Each 900 g
Further Information
PROPERTYVALUE
Dimensions 220 x 43 x 145mm
Handle Style Straight
Overall Height 145 mm millimetre in. inch
Overall Length 220 mm millimetre in. inch
Overall Width 43 mm millimetre in. inch
Product Number SS1525K
Sound Power Level 104 dBA decibel adjusted
Weight 0.6 kg kilogram g gram
Includes 1/4 NPT Nipple
(2) Spanners
(3) Clutch Springs
5 x 50mm Slotted Bit
Clutch Adjusting Wrench
Mini Oil Bottle
No.1 x 65mm Crosspoint Double Ended Bit
SS1525 Screwdriver
Number of Bits 2
Horsepower hp horsepower
Maximum No Load Speed 1,500 rpm revolutions per minute
Air Pressure 90 PSI pounds per square inch 6.2
Air Consumption 4 CFM cubic feet per minute
Reversibility Reversible
Air Inlet Size 1/4 in NPT
Compatible Hose Inner Diameter 10 mm millimetre
Compatible Hose Outer Diameter 14 mm millimetre
Workplace Application Industrial
Production
Sound Pressure Level 90 dBA decibel adjusted
Speed Features Variable Speed
Compatible Bit Size 1/4 in. inch mm millimetre
Clutch Adjustability Adjustable Clutch



Get Best QuoteRequest A Callback
Multi- Purpose Kit Containing Surface Conditioning Kobe Make Model No-SCF2206K
  • Multi- Purpose Kit Containing Surface Conditioning Kobe Make Model No-SCF2206K
  • Multi- Purpose Kit Containing Surface Conditioning Kobe Make Model No-SCF2206K
  • Multi- Purpose Kit Containing Surface Conditioning Kobe Make Model No-SCF2206K
  • Multi- Purpose Kit Containing Surface Conditioning Kobe Make Model No-SCF2206K
  • Multi- Purpose Kit Containing Surface Conditioning Kobe Make Model No-SCF2206K
  • Multi- Purpose Kit Containing Surface Conditioning Kobe Make Model No-SCF2206K
  • Multi- Purpose Kit Containing Surface Conditioning Kobe Make Model No-SCF2206K
  • Multi- Purpose Kit Containing Surface Conditioning Kobe Make Model No-SCF2206K
  • Multi- Purpose Kit Containing Surface Conditioning Kobe Make Model No-SCF2206K
  • Multi- Purpose Kit Containing Surface Conditioning Kobe Make Model No-SCF2206K

Multi- Purpose Kit Containing Surface Conditioning Kobe Make Model No-SCF2206K

Product Price: Rs 999 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
TypeMulti- Purpose Kit Containing Surface Conditioning
PackagingBox
MaterialMetal
Air Pressure50-100 psi, 100-120 psi, >120 psi
Model Name/NumberCode KBE2707000K
Air Consumption<5 cfm, 5 to 6 cfm
BrandKOBE
Warranty6 months
No. Of Pieces1 KIT SETS
Surface conditioning & finishing kit ( Kobe Make ) KBE-270-7000K

Description

SCF2206K
Multi-purpose kit containing: one of each of the following surface preparation discs - fine, medium & coarse. 2x abrasive disc grades - P36, P60, P80 & P120.
1x 6mm diameter shank to fit the backing pad. Includes: GDA2206L Angle Die Grinder. Kobe angle die grinder. Supplied in a sturdy plastic carry case.

*Based on a 15 second cycle per minute average use.


  •  Air Consumption 4CFM
  •  Exhaust Location Rear
  •  Air Inlet Size 1/4NPT
  •  Overall Length 155mm
SURFACE CONDITION/FINISHI NG GRINDER KIT

 

  • Air Consumption4CFM
  • Exhaust LocationRear
  • Air Inlet Size1/4NPT
  • Overall Length155mm
  • Product NumberSCF2206K
  • Maximum No Load Speed22,000rpm
  • Includes(2) Collet Spanner(2) Each 36, 60, 80, 120g Abrasive Disc(2)50mm Surface Preparation Disc Coarse2)50mm Surface Preparation Disc Fine2)50mm Surface Preparation Disc Medium50mm Backing Pad6mm Long Shank ColletMoulded Plastic Carry Case
  • Overall Height75mm
  • Compatible Wheel Diameter50mm
  • Throttle FeaturesSafety Release Throttle
  • Speed FeaturesVariable Speed

Multi-purpose kit containing: one of each of the following surface preparation discs - fine, medium & coarse. 2x abrasive disc grades - P36, P60, P80 & P120. 1x 6mm diameter shank to fit the backing pad. One Kobe angle die grinder with 1/4" NPT air inlet thread for 10mm air hose, 90PSI air pressure, 4CFM* air consumption. Supplied in a sturdy plastic carry case. *Based on a 15 second cycle per minute average use.Surface Conditioning & Finishing )
Get Best QuoteRequest A Callback
Extended Spindle Die Grinder FDG 180E Kobe Make

Extended Spindle Die Grinder FDG 180E Kobe Make

Product Price: Rs 10,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
BrandKobe
Collet Chuck Size4 mm, 6 mm, 8 mm
Wheel Diameter4 inch, 7 inch, 5 inch, 6 inch
Air Pressure<50 psi, 50-100 psi
No Load Speed18000 to 23000 rpm, <3000 rpm, 15000 to 18000 rpm, 10000 to 15000 rpm, 3000 to 10000 rpm, 23000 to 30000 rpm
Spindle Size7/16"-20, 3/8"-24, 5/16"-24, 5/8"-11
Air Consumption<10 cfm, 10 to 20 cfm, 20 to 50 cfm
Air Inlet1/2", 1/4"
Extended Spindle Die Grinder Fdg180e Kobe Make Model No FDG180E /Order Code:KBE2702272K Extended Spindle Die Grinder FDG180e For polishing, buffing, deburring and grinding. Rubber handle provides grip and comfort. Extended head for flexibility in tight areas. Speed regulator. Safety release throttle. Rear exhaust. Ball bearing construction for long tool life. Free speed: 25,000rpm. Collet size: 6mm. Air inlet thread: 1/4" NPT. Minimum air hose size (ID): 3/8" (10mm). Air pressure: 90PSI/6.2Bar. Air consumption: 4CFM*. Sound pressure level: 91dB(A). Sound power level: 98dB(A). Vibration level: 4.53m/s2. Overall length: 253mm. Net weight: 657gm. *Based on a 15 second cycle per minute average use.
Get Best QuoteRequest A Callback
Pistol Drill ( Kobe Make )
  • Pistol Drill ( Kobe Make )
  • Pistol Drill ( Kobe Make )
  • Pistol Drill ( Kobe Make )
  • Pistol Drill ( Kobe Make )
  • Pistol Drill ( Kobe Make )
  • Pistol Drill ( Kobe Make )
  • Pistol Drill ( Kobe Make )

Pistol Drill ( Kobe Make )

Product Price: Rs 1,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
No Load Speed0-500
Max Drill Depth0-10 mm
TypeImpact Drill, Electric Drill, Hammer Drill, Pillar Drill, Rotary Drill
BrandKOBE
Max Hole Size12 mm
Overall LengthSTD
Packaging SizeSTD

Item Code:KBE2701390D
Heavy Duty Pistol Drill 10mm

MODEL NO - DP2610 / ORDER CODE NO- KBE2701390D

Kobe Red Line.DP2610 10mm Heavy Duty Pistol Drill
View :161

DP2610 10mm Jacobs chuck, stall resistant, directional front exhaust, hammer finish casing, needle bearing gears Air inlet thread: 1/4" NPT. Minimum air hose size (ID): 3/8"(10mm). Chuck capacity: 10mm. Spindle thread: 3/8" - 24. Air pressure: 90PSI/6.3Bar. Air consumption: 4cfm* (144 ltr/min). Sound pressure level: 87dBA. Sound power level: 103dBA. Vibration level: 2.5m/s2. Overall length: 180mm. *Based on a 15 second cycle per minute average use.

10mm Jacobs chuck, stall resistant, directional front exhaust, hammer finish casing, needle bearing gears, 3/8" - 24 spindle thread.

Air inlet thread: 1/4" NPT.

Minimum air hose size (ID): 3/8"(10mm).

Chuck capacity: 10mm.

Spindle thread: 3/8" - 24.

Air pressure: 90PSI/6.3Bar.

Air consumption: 4CFM* (144 ltr/min).

Sound pressure level: 87 dBA.

Sound power level: 103 dBA.

Vibration level: 2.5 m/s2.

Overall length: 180mm.

Get Best QuoteRequest A Callback
Kobe Air Hammer Kobe Red Line Hp2090K Heavy Duty Hammer and Chisel Kit KBE2703100K
  • Kobe Air Hammer Kobe Red Line Hp2090K Heavy Duty Hammer and Chisel Kit KBE2703100K
  • Kobe Air Hammer Kobe Red Line Hp2090K Heavy Duty Hammer and Chisel Kit KBE2703100K
  • Kobe Air Hammer Kobe Red Line Hp2090K Heavy Duty Hammer and Chisel Kit KBE2703100K
  • Kobe Air Hammer Kobe Red Line Hp2090K Heavy Duty Hammer and Chisel Kit KBE2703100K
  • Kobe Air Hammer Kobe Red Line Hp2090K Heavy Duty Hammer and Chisel Kit KBE2703100K
  • Kobe Air Hammer Kobe Red Line Hp2090K Heavy Duty Hammer and Chisel Kit KBE2703100K
  • Kobe Air Hammer Kobe Red Line Hp2090K Heavy Duty Hammer and Chisel Kit KBE2703100K
  • Kobe Air Hammer Kobe Red Line Hp2090K Heavy Duty Hammer and Chisel Kit KBE2703100K
  • Kobe Air Hammer Kobe Red Line Hp2090K Heavy Duty Hammer and Chisel Kit KBE2703100K

Kobe Air Hammer Kobe Red Line Hp2090K Heavy Duty Hammer and Chisel Kit KBE2703100K

Product Price: Rs 999 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationHAMMERING
No Load Speed<1200 BPM
Model Name/NumberKOBE MAKE
LengthSTD
BrandKobe
Air Pressure50-70 psi, 30-50 psi, <30 psi
CFM20 to 25 Air Consumption, <20 Air Consumption, 25 to 35 Air Consumption
Piston Stroke2", 4", 2-1/2"
Kobe Red Line Hp2090K Heavy Duty Hammer and Chisel Kit KBE2703100K
Air Hammer


HP2090K- Supplied with flat chisel, spot weld breaker, taper punch, rivet cutter and sheet metal cutter. Hard hitting long stroke. Accepts all standard 0.401" shank tools. 1/4" NPT air inlet thread for 10mm air hose, 90psi air pressure, 4cfm* air consumption.

Features:

  • Hard hitting long stroke
  • Highly durable, effective chisels

Technical Information:

  • Stroke length: 90mm
  • Sound pressure level: 105dBA
  • Sound power level: 118dBA
  • Vibration level: 11.5m/s²
  • Overall length: 230mm

*Based on a 15 second cycle per minute average use.

 

Buy Kobe Red Line Hp2090K Heavy Duty Hammer and Chisel Kit KBE2703100K online in India at wholesale rates. If you have been looking for Kobe Red Line Hp2090K Heavy Duty Hammer and Chisel Kit KBE2703100K dealers, your search ends here as you can get the best Kobe Red Line Hp2090K Heavy Duty Hammer and Chisel Kit KBE2703100K distributors in top cities such as Delhi NCR, Mumbai, Chennai, Bengaluru, Kolkata, Chennai, Pune, Jaipur, Hyderabad and Ahmedabad. You can purchase Kobe Red Line Hp2090K Heavy Duty Hammer and Chisel Kit KBE2703100K of the finest quality and rest assured to get the best in terms of both durability and performance. If you are bothered about the Kobe Red Line Hp2090K Heavy Duty Hammer and Chisel Kit KBE2703100K prices, you can be totally sure to get the best rates as Industrybuying brings you genuine Kobe Red Line Hp2090K Heavy Duty Hammer and Chisel Kit KBE2703100K rates and quality assured products only from the best of brands with exclusive brand discounts you won’t find anywhere else. Procure Kobe Red Line Hp2090K Heavy Duty Hammer and Chisel Kit KBE2703100K today and avail the best offers on your purchase.

SKU: PNE.AIR.76704270Type of Product: Heavy Duty Power Hammer and Chisel KitModel No: KBE2703100KAir Consumption: 4CFMLength: 200 mmWeight: 1.8 KgSpeed (RPM): 2000bpmPart No: HP2090KStroke Length: 90 mmMaterial: Alloy SteelDiameter: 10 mmSpeed Feature: Single SpeedWidth: 50 mmAir Inlet Size: 1/4 NPTHandle Type: Pistol GripHeight: 160 mm
Get Best QuoteRequest A Callback
Pneumatic Angle Grinder 100 MM Kobe Make Model No GA1011
  • Pneumatic Angle Grinder 100 MM Kobe Make Model No GA1011
  • Pneumatic Angle Grinder 100 MM Kobe Make Model No GA1011
  • Pneumatic Angle Grinder 100 MM Kobe Make Model No GA1011
  • Pneumatic Angle Grinder 100 MM Kobe Make Model No GA1011
  • Pneumatic Angle Grinder 100 MM Kobe Make Model No GA1011
  • Pneumatic Angle Grinder 100 MM Kobe Make Model No GA1011
  • Pneumatic Angle Grinder 100 MM Kobe Make Model No GA1011
  • Pneumatic Angle Grinder 100 MM Kobe Make Model No GA1011
  • Pneumatic Angle Grinder 100 MM Kobe Make Model No GA1011
  • Pneumatic Angle Grinder 100 MM Kobe Make Model No GA1011
  • Pneumatic Angle Grinder 100 MM Kobe Make Model No GA1011
  • Pneumatic Angle Grinder 100 MM Kobe Make Model No GA1011
  • Pneumatic Angle Grinder 100 MM Kobe Make Model No GA1011

Pneumatic Angle Grinder 100 MM Kobe Make Model No GA1011

Product Price: Rs 999 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Type of GrinderKobe Make Model No GA-1011
Model Name/NumberModel No GA 1011
Warranty1 year
Air Pressure<50 psi
Air Consumption<10 cfm, 10 to 20 cfm, 20 to 50 cfm
Air Inlet1/2", 1/4"
Wheel Diameter4 inch,5 inch,6 inch,7 inch,8 inch

Pneumatic Angle Grinder 100 MM (4")
Kobe Make Model No Ga1011


Pneumatic Angle Grinder 100mm (4")

MODEL NO - GA1011L ORDER CODE -KBE-270-2050P

Features:

Adjustable safety guard
safety lever throttle
Supplied with auxiliary side handle
flanges and spanner
lightweight and compact
100 x 3 x 16mm cut-off disc
3/8” - 24 spindle thread
Overall length: 230mm

Specification:
Air inlet thread: 1/4" NPT
Minimum air hose size: 10mm (3/8")
Air pressure: 6.3bar (90psi)
Motor power: 0.7hp
Air consumption: 6CFM* (216 ltr/min)
Sound power level: 89dBA
Sound pressure/ noise level: 96dBA
Vibration level: 4.0m/s2
Overall length: 230mm
 
Free Speed (rpm)
Order Code KBE-270
11000
-2050P



Additional Information:

  • Item Code: GA1011
  • Production Capacity: STD
  • Delivery Time: EX STOCK
  • Packaging Details: STD
Get Best QuoteRequest A Callback
Ext. Straight Die Grinder 6 Mm Model No-B-3555 1/4
  • Ext. Straight Die Grinder 6 Mm Model No-B-3555 1/4
  • Ext. Straight Die Grinder 6 Mm Model No-B-3555 1/4
  • Ext. Straight Die Grinder 6 Mm Model No-B-3555 1/4
  • Ext. Straight Die Grinder 6 Mm Model No-B-3555 1/4
  • Ext. Straight Die Grinder 6 Mm Model No-B-3555 1/4
  • Ext. Straight Die Grinder 6 Mm Model No-B-3555 1/4
  • Ext. Straight Die Grinder 6 Mm Model No-B-3555 1/4
  • Ext. Straight Die Grinder 6 Mm Model No-B-3555 1/4
  • Ext. Straight Die Grinder 6 Mm Model No-B-3555 1/4

Ext. Straight Die Grinder 6 Mm Model No-B-3555 1/4

Product Price: Rs 999 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Type Of GrinderDie Grinder
Model Name/NumberModel No-B-3555 1/4
Warranty6 months
Air Pressure<50 psi
Air Consumption10 to 20 cfm, 20 to 50 cfm, <10 cfm
Air Inlet1/4", 1/4, 1/2"
BrandKobe

Kobe™ Extended Straight Die Grinder

MODEL NO B3555 / Order Code:KBE2704140K

Use for grinding, polishing, buffing and deburring. The extra length allows you to reach more confined areas. Reversible hardened steel 1/4" collet. Planetary gears for longer life and smoother running. Low profile teasing throttle for precise speed control. Rotating air inlet to prevent the air hose tangling.

Specifications:
Model number: B3555
Collet size: 1/4" (6mm), 1/8" (3mm).
Free speed: 25,000rpm.
Recommended air pressure: 6.2Bar (90PSI).
Air consumption: 4CFM* (113ltr/min).
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 10mm (3/8").
Noise level: 91dBA.
Sound power level: 98dBA.
Vibration level#: 4.53m/s2.
Overall length: 260mm.
Net weight: 0.68kg.
?Per Pneurop Standard Per EN 12366.
#Per EN 28927-1.

*Based on a 15 second cycle per minute average use.

Get Best QuoteRequest A Callback
Angle Die Grinder Model No GDA 2206L ( Kobe Make )
  • Angle Die Grinder Model No GDA 2206L ( Kobe Make )
  • Angle Die Grinder Model No GDA 2206L ( Kobe Make )
  • Angle Die Grinder Model No GDA 2206L ( Kobe Make )
  • Angle Die Grinder Model No GDA 2206L ( Kobe Make )
  • Angle Die Grinder Model No GDA 2206L ( Kobe Make )
  • Angle Die Grinder Model No GDA 2206L ( Kobe Make )
  • Angle Die Grinder Model No GDA 2206L ( Kobe Make )
  • Angle Die Grinder Model No GDA 2206L ( Kobe Make )

Angle Die Grinder Model No GDA 2206L ( Kobe Make )

Product Price: Rs 999 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Type of GrinderAngle Type Die Grinder
Model Name/NumberGDA2206L
No Load SpeedSTD
WeightSTD
Air Pressure<50 psi
Air Consumption<10 cfm, 20 to 50 cfm, 10 to 20 cfm
Air Inlet1/4
BrandKobe
Warranty6 months

ANGLE DIE GRINDER MODEL NO GDA 2206L ( KOBE MAKE )
MODEL NO GDA 2206L ORDER CODE NO KBE-270-2020H
Kobe 90 degree Angle Die Grinder
GDA2206L
Safety lever throttle, reverse exhaust, Ideal for polishing, grinding and buffing, suitable for use in confined areas.
Free speed: 22,000rpm.
Air inlet thread: 1/4" NPT.
Minimum air hose size: 3/8" (10mm).
Air pressure: 90psi/6.2bar.
Air consumption: 4cfm*.
Noise Level: 85dBA
Sound Power: 99dBA
Vibration: 7.0m/s v
Collet size: 6mm.
Overall length: 160mm.
*Based on a 15 second cycle per minute average use.

Get Best QuoteRequest A Callback
Reversible Angle Drill 10mm Model No  DAR-1510 (Kobe Make )
  • Reversible Angle Drill 10mm Model No  DAR-1510 (Kobe Make )
  • Reversible Angle Drill 10mm Model No  DAR-1510 (Kobe Make )
  • Reversible Angle Drill 10mm Model No  DAR-1510 (Kobe Make )
  • Reversible Angle Drill 10mm Model No  DAR-1510 (Kobe Make )
  • Reversible Angle Drill 10mm Model No  DAR-1510 (Kobe Make )
  • Reversible Angle Drill 10mm Model No  DAR-1510 (Kobe Make )
  • Reversible Angle Drill 10mm Model No  DAR-1510 (Kobe Make )
  • Reversible Angle Drill 10mm Model No  DAR-1510 (Kobe Make )

Reversible Angle Drill 10mm Model No DAR-1510 (Kobe Make )

Product Price: Rs 999 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Model Name/NumberDAR-1510
Max Hole Size10 mm
Warranty6 months
Max Drill Depth0-10 mm
TypeElectric Drill, Rotary Drill, Hammer Drill, Impact Drill, Pillar Drill
Max. Drill Diameter1
BrandKobe
Is It Variable SpeedVariable Speed
Available in KitYes
Reversible Angle Drill 10mm MODELNO DAR1510 (Kobe MAKE )

ORDER CODE NO- KBE-270-1425M
Kobe Red Line.DAR1510 10mm Reversible Angle Drill
View : 156

DAR1510 10mm Jacobs chuck, fingertip control of reverse, reverse exhaust, overall head height 94mm, 3/8"- 24 spindle thread. Specifications: Air inlet thread: 1/4" NPT. Chuck capacity: 10mm. Minimum hose size: 3/8"(10mm). Air pressure: 90psi/6.3bar. Air consumption: 4cfm* Sound pressure level: 94dBA. Sound power level: 106dBA. Vibration level: 2.6m/s2. Overall length: 178mm. *Based on a 15 second cycle per minute average use.

DETAILS-10mm Jacobs chuck, fingertip control of reverse, reverse exhaust, overall head height 94mm,
Specifications:1/4" NPT air inlet thread for 10mm air hose. 90PSI air pressure. 4CFM* air consumption. 3/8" - 24 spindle thread. Overall length 178mm.
*Based on a 15 second cycle per minute average use.

Get Best QuoteRequest A Callback
Mini Die Grinder High Speed Model No GD 2806L (Kobe Make )

Mini Die Grinder High Speed Model No GD 2806L (Kobe Make )

Product Price: Rs 1,000 / PieceGet Best Price

Product Brochure

Product Details:
Model NumberGD 2806L
BrandKobe
Wheel Diameter7 inch, 5 inch, 6 inch, 4 inch
Air Pressure50-100 psi, >120 psi, <50 psi, 100-120 psi
No Load Speed15000 to 18000 rpm, 18000 to 23000 rpm, 10000 to 15000 rpm, <3000 rpm, 3000 to 10000 rpm
Spindle Size7/16"-20, 5/16"-24, 5/8"-11, 3/8"-24
Air Consumption20 to 50 cfm, <10 cfm, 10 to 20 cfm
Air Inlet1/4", 1/2"
Mini Die Grinder High Speed MODEL NO GD 2806L (Kobe MAKE )

MODEL NO GD2806L ORDER CODE NO- KBE-270-2035M

For precision engineers mould making etc. Safety lever throttle, front exhaust, ultra compact and lightweight.
Specifications:Free speed: 25,000rpm. Collet size: 6mm.Air inlet thread: 1/4 NPT.Air hose size (ID): 10mm.Air pressure: 90PSI.Air consumption: 4CFM*.Noise level: 94dB(A).Sound power level: 103dB(A).Vibration: 5.0m/s.Overall length: 120mm.
*Based on a 15 second cycle per minute average use.
Get Best QuoteRequest A Callback
Pistol Drill 10 MM Mode No- DP- 2210 (  Kobe Make )
  • Pistol Drill 10 MM Mode No- DP- 2210 (  Kobe Make )
  • Pistol Drill 10 MM Mode No- DP- 2210 (  Kobe Make )
  • Pistol Drill 10 MM Mode No- DP- 2210 (  Kobe Make )
  • Pistol Drill 10 MM Mode No- DP- 2210 (  Kobe Make )
  • Pistol Drill 10 MM Mode No- DP- 2210 (  Kobe Make )
  • Pistol Drill 10 MM Mode No- DP- 2210 (  Kobe Make )
  • Pistol Drill 10 MM Mode No- DP- 2210 (  Kobe Make )

Pistol Drill 10 MM Mode No- DP- 2210 ( Kobe Make )

Product Price: Rs 999 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Chuck Capacityacobs chuck, stall resistant, heavy duty bearings, 1/2" HP motor, 3/8" - 24 spindle thread.
Max Hole Size10 mm
No Load Speed0-500
Max Drill Depth0-10 mm
TypePillar Drill, Impact Drill, Electric Drill, Hammer Drill, Rotary Drill
BrandKOBE
ConditionNew

Pistol Drill 10mm MODE NO- DP- 2210 ( KOBE MAKE )

ORDER CODE NO- KBE-270-1375C

Kobe 10mm Pistol Drill DP221010mm

Jacobs chuck, stall resistant, heavy duty bearings, 1/2" HP motor, 3/8" - 24 spindle thread.
Specifications:Air inlet thread: 1/4" NPT. Minimum air hose size (ID): 3/8"(10mm). Chuck capacity: 10mm. Spindle thread: 3/8" - 24.Air pressure: 90PSI/6.3Bar. Air consumption: 4CFM* (144 ltr/min). Sound pressure level: 87dBA. Sound power level: 103dBA. Vibration level: 1.5m/s2. Overall length: 165mm.
Based on a 15 second cycle per minute average use.

Get Best QuoteRequest A Callback
Kobe Pistol Drill  DP-2210

Kobe Pistol Drill DP-2210

Product Price: Rs 1,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
BrandKOBE
Warranty6 months
Wheel Diameter6 inch, 7 inch, 4 inch, 8 inch, 5 inch
Collet Chuck Size6 mm, 8 mm, 4 mm
Air Pressure50-100 psi, 100-120 psi, >120 psi, <50 psi
No Load Speed3000 to 10000 rpm, 10000 to 15000 rpm, 15000 to 18000 rpm, <3000 rpm, 23000 to 30000 rpm, 18000 to 23000 rpm
Spindle Size7/16"-20, 5/8"-11, 5/16"-24, 3/8"-24
Air Consumption<10 cfm, 10 to 20 cfm, 20 to 50 cfm, >50 cfm
Air Inlet1/4", 1/2"


Kobe 10mm Pistol Drill DP2210
View : 148

10mm Jacobs chuck, stall resistant, heavy duty bearings, 1/2" HP motor, 3/8" - 24 spindle thread.
Specifications:
Air inlet thread: 1/4" NPT. 
Minimum air hose size (ID): 3/8"(10mm). 
Chuck capacity: 10mm. 
Spindle thread: 3/8" - 24.
Air pressure: 90PSI/6.3Bar. 
Air consumption: 4CFM* (144 ltr/min). 
Sound pressure level: 87dBA. 
Sound power level: 103dBA. 
Vibration level: 1.5m/s2. 
Overall length: 165mm. 

Get Best QuoteRequest A Callback
Die Grinder with Safety Throttle Model No-GD 2206 L Kobe
  • Die Grinder with Safety Throttle Model No-GD 2206 L Kobe
  • Die Grinder with Safety Throttle Model No-GD 2206 L Kobe
  • Die Grinder with Safety Throttle Model No-GD 2206 L Kobe
  • Die Grinder with Safety Throttle Model No-GD 2206 L Kobe
  • Die Grinder with Safety Throttle Model No-GD 2206 L Kobe
  • Die Grinder with Safety Throttle Model No-GD 2206 L Kobe
  • Die Grinder with Safety Throttle Model No-GD 2206 L Kobe
  • Die Grinder with Safety Throttle Model No-GD 2206 L Kobe

Die Grinder with Safety Throttle Model No-GD 2206 L Kobe

Product Price: Rs 999 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Type Of GrinderDie Grinder
Model Name/NumberGD 2206 L Kobe
Warranty6 months
BrandKobe
Air Pressure<50 psi
Collet Chuck Size4 mm, 8 mm, 6 mm
Air Consumption>50 cfm, 20 to 50 cfm, <10 cfm, 10 to 20 cfm
Air Inlet1/4", 1/2"
Wheel Diameter4 inch,5 inch,6 inch,7 inch,8 inch

DIE GRINDER WITH SAFETY THROTTLE

MODEL NO-GD 2206 L KOBE

MODEL NO-GD 2206\ Order Code:KBE2702024K

Kobe™ Straight Die Grinder

GD2206L
1/2hp motor delivers 22,000 precisely controllable rpm in the palm of your hand making it ideally suitable for polishing, buffing and grinding. The robust and durable single piece aluminium body houses the 1/2hp motor and precision balanced bearings provide reliability in the most demanding of industrial/automotive applications. The trigger has a safety catch to prevent accidental starts.
Collet size: 6mm.
Air inlet thread: 1/4” NPT.
Air hose size (ID): 10mm.
Air pressure: 90psi.
Air consumption: 4cfm*.
Noise level: 93dBA.
Sound power level: 103dBA.
Vibration: 5.4m/s.
Overall length: 170mm.

*Based on a 15 second cycle per minute average use.

Get Best QuoteRequest A Callback
Reversible Pistol Drill Model No FDP 500 (Kobe Make )
  • Reversible Pistol Drill Model No FDP 500 (Kobe Make )
  • Reversible Pistol Drill Model No FDP 500 (Kobe Make )
  • Reversible Pistol Drill Model No FDP 500 (Kobe Make )
  • Reversible Pistol Drill Model No FDP 500 (Kobe Make )
  • Reversible Pistol Drill Model No FDP 500 (Kobe Make )
  • Reversible Pistol Drill Model No FDP 500 (Kobe Make )
  • Reversible Pistol Drill Model No FDP 500 (Kobe Make )
  • Reversible Pistol Drill Model No FDP 500 (Kobe Make )

Reversible Pistol Drill Model No FDP 500 (Kobe Make )

Product Price: Rs 999 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Model Name/NumberModel No FDP 500 (Kobe Make )
No Load SpeedSTD
TypeElectric Drill, Impact Drill, Pillar Drill, Hammer Drill
Drilling Diameter16 mm, 22 mm, 6 mm, 20 mm, 13 mm
BrandBosch, Hitachi
Warranty6 months
Available in KitYes


REVERSIBLE PISTOL DRILL MODEL NO FDP 500 (KOBE MAKE )

MODEL NO FDP 500 ORDER CODE NO -KBE-270-2142K

13mm Reversible Pistol Drill


FPD500
Suitable for high torque drilling applications as well as screwdriving, hole sawing and cylinder honing. Rubber handle provides grip and operator comfort. 1/2” chuck. Adjustable side handle. Short gear case design. Heavy duty gearing system with oil-less
bushing. Spring loaded rotor vanes. Rear exhaust.
Ball bearing construction for a long tool life.
Spindle thread: 3/8” - 24.
Air inlet thread: 1/4” NPT.
Minimum air hose size (ID): 3/8” (10mm).
Air pressure: 90psi/6.2bar.
Air consumption: 3.65cfm*.
Sound pressure level: 95dBA.
Sound power level: 100dBA.
Vibration level: 0.4m/s2.
Overall length: 240mm.

*Based on a 15 second cycle per minute average use.
Get Best QuoteRequest A Callback
Pneumatic Pistol Grip Air Hammer
  • Pneumatic Pistol Grip Air Hammer
  • Pneumatic Pistol Grip Air Hammer
  • Pneumatic Pistol Grip Air Hammer
  • Pneumatic Pistol Grip Air Hammer
  • Pneumatic Pistol Grip Air Hammer
  • Pneumatic Pistol Grip Air Hammer
  • Pneumatic Pistol Grip Air Hammer
  • Pneumatic Pistol Grip Air Hammer

Pneumatic Pistol Grip Air Hammer

Product Price: Rs 10,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
No Load Speed<1200 BPM
Model Name/NumberHP-4540
Air Pressure30-50 psi, <30 psi
CFM<20 Air Consumption, 20 to 25 Air Consumption, 25 to 35 Air Consumption
Piston Stroke4", 2-1/2", 2"
BrandKobe
Warranty6 months

Pneumatic Pistol Grip Air Hammer 
Pnumatic Pistol Grip Air Hammer  MODEL NO -HP-4540 KOBE MAKE
Item Code: KBE2703000K

Pistol Grip Air Hammer
HP4540
Suitable for use with cutters, punches, spot weld breakers and flat chisels. Supplied with retainer spring. Accepts all standard 0.401” shank tools, 1/4” NPT air inlet thread for 10mm air hose, 90psi air pressure, 4cfm* air consumption.
Noise Level: 112dBA
Sound Power: 121dBA
Vibration: 15.5m/
Stroke length: 40mm.
Overall length: 145mm.

Get Best QuoteRequest A Callback
Reversible Pistol Drill 10 mm
  • Reversible Pistol Drill 10 mm
  • Reversible Pistol Drill 10 mm
  • Reversible Pistol Drill 10 mm
  • Reversible Pistol Drill 10 mm
  • Reversible Pistol Drill 10 mm
  • Reversible Pistol Drill 10 mm
  • Reversible Pistol Drill 10 mm
  • Reversible Pistol Drill 10 mm

Reversible Pistol Drill 10 mm

Product Price: Rs 999 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Chuck CapacitySTD
Max Hole Size10 mm
No Load Speed0-500
TypeRotary Drill, Electric Drill, Hammer Drill, Pillar Drill, Impact Drill
BrandKOBE
Is It Variable SpeedVariable Speed
Warranty6 months

Reversible Pistol Drill 10 MM MODEL NO DPR 1810 KOBE MAKE

MODEL NO- DPR-1810 ORDER CODE NO KBE-270-1400L

Kobe Red Line.DPR1810 10mm Reversible Pistol Drill


10mm Jacobs chuck, stall resistant, heavy duty bearings, thumb switch for reverse, suitable for screwdriving.
Specifications:Spindle: 3/8?- 24. Air inlet thread: 1/4 NPT. Minimum air hose size (ID): 3/8(10mm). Chuck capacity: 10mm. Spindle thread: 3/8 - 24.Air pressure: 90PSI/6.3Bar. Air consumption: 4CFM* (144 ltr/min). Sound pressure level: 85 dB(A). Sound power level: 101 dB(A). Vibration level: 5.4 m/s2. Overall length: 165mm.
*Based on a 15 second cycle per minute average use.

Get Best QuoteRequest A Callback
Die Grinder Kit Model No- Gd-22lk ( Kobe Make )
  • Die Grinder Kit Model No- Gd-22lk ( Kobe Make )
  • Die Grinder Kit Model No- Gd-22lk ( Kobe Make )
  • Die Grinder Kit Model No- Gd-22lk ( Kobe Make )
  • Die Grinder Kit Model No- Gd-22lk ( Kobe Make )
  • Die Grinder Kit Model No- Gd-22lk ( Kobe Make )
  • Die Grinder Kit Model No- Gd-22lk ( Kobe Make )
  • Die Grinder Kit Model No- Gd-22lk ( Kobe Make )
  • Die Grinder Kit Model No- Gd-22lk ( Kobe Make )

Die Grinder Kit Model No- Gd-22lk ( Kobe Make )

Product Price: Rs 1,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Warranty6 months
Usage/ApplicationGRINDING,IMPACT,OTHER PURPOSE
BrandKOBE
MaterialMETAL
Disc Diameter4 inch
Air Inlet1/4
Die Grinder Kit MODEL NO- GD-22LK ( KOBE MAKE )

MODEL NO GD-22LK ORDER CODE NO -KBE-270-2030L

Supplied with a 10 piece mounted point set in a plastic carry case.
Free speed: 22,000rpm.Collet size: 3 and 6mm.Air inlet thread: 1/4 NPT.Air hose size (ID): 10mm.Air pressure: 90PSI.Air consumption: 4CFM*.Noise level: 93dB(A).Sound power level: 103dB(A).Vibration: 5.4m/s.Overall length: 170mm.
*Based on a 15 second cycle per minute average use.
Get Best QuoteRequest A Callback
Reversible Pistol Air Drill Quick Change 10 Mm F D P 3175 Kobe Make
  • Reversible Pistol Air Drill Quick Change 10 Mm F D P 3175 Kobe Make
  • Reversible Pistol Air Drill Quick Change 10 Mm F D P 3175 Kobe Make
  • Reversible Pistol Air Drill Quick Change 10 Mm F D P 3175 Kobe Make
  • Reversible Pistol Air Drill Quick Change 10 Mm F D P 3175 Kobe Make
  • Reversible Pistol Air Drill Quick Change 10 Mm F D P 3175 Kobe Make
  • Reversible Pistol Air Drill Quick Change 10 Mm F D P 3175 Kobe Make
  • Reversible Pistol Air Drill Quick Change 10 Mm F D P 3175 Kobe Make
  • Reversible Pistol Air Drill Quick Change 10 Mm F D P 3175 Kobe Make
  • Reversible Pistol Air Drill Quick Change 10 Mm F D P 3175 Kobe Make

Reversible Pistol Air Drill Quick Change 10 Mm F D P 3175 Kobe Make

Product Price: Rs 999 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Max Hole Size10 mm
No Load Speed0-500
Max Drill Depth0-10 mm
TypeElectric Drill, Pillar Drill, Impact Drill, Hammer Drill, Rotary Drill
BrandKOBE
Air ConsumptionFree speed 1,800rpm.Chuck size 3/8 (10mm)Air inlet thread
Air Inlet1/4 NPT.Minimum air hose size (ID) 3/8 (10mm).Air pressure 90PSI/6.2Bar.
ConditionNew

Kobe  Quick Change Reversible Pistol Air Drill 10 mm F D P 3175

Suitable for drilling and screwdriving. Rubber handle provides grip and operator comfort. 3/8 Jacobs industrial keyless chuck. Stall resistant. Short gear case design. Heavy duty gearing system with oil-less bushing. Spring loaded rotor vanes. Rear exhaust. Ball bearing construction for a long tool life. Comes with comprehensive instructions.
Specifications: Free speed: 1,800rpm.Chuck size: 3/8 (10mm)Air inlet thread: 1/4 NPT.Minimum air hose size (ID): 3/8 (10mm).Air pressure: 90PSI/6.2Bar.Air consumption: 3.35CFM*.Sound pressure level: 95 dB(A).Sound power level: 100 dB(A).Vibration level: 0.7 m/s2.Overall length: 188mm.Net weight: 1.39kg.
*Based on a 15 second cycle per minute average use.

Get Best QuoteRequest A Callback
Micro Die Grinder Model No-GM-5603   (Kobe Make)

Micro Die Grinder Model No-GM-5603 (Kobe Make)

Product Price: Rs 999 / PieceGet Best Price

Product Brochure

Product Details:
Air Pressure<50 psi
No Load Speed<3000 rpm
Model NumberGM-5603 KOBE MAKE
Spindle Size5/16"-24
Air Consumption<10 cfm
Air Inlet1/4",1/2"
BrandKobe
Warranty1 year
Micro Die Grinder MODEL NO-GM-5603 ( Kobe MAKE )

MODEL NO GM-5603 ORDER CODE NO- KBE-270-2543K

Kobe™ Micro Air Die Grinder

For precision grinding etc. With hose and silencer.
Specifications:1/4" NPT air inlet thread for 5mm air hose. 90PSI air pressure, 7CFM* air consumption. Collet size: 3mm. Overall length: 156mm.
*Based on a 15 second cycle per minute average use.
Get Best QuoteRequest A Callback
Heavy Duty Impact Wrench Model No- IW500
  • Heavy Duty Impact Wrench Model No- IW500
  • Heavy Duty Impact Wrench Model No- IW500
  • Heavy Duty Impact Wrench Model No- IW500
  • Heavy Duty Impact Wrench Model No- IW500
  • Heavy Duty Impact Wrench Model No- IW500
  • Heavy Duty Impact Wrench Model No- IW500
  • Heavy Duty Impact Wrench Model No- IW500

Heavy Duty Impact Wrench Model No- IW500

Product Price: Rs 999 / PieceGet Best Price

Product Brochure

Product Details:
Drive Size1/2 Inch
BrandSumake
Warranty6 months
Air Pressure50-100 psi
Weight1/2 Kg Onwards
Air Consumption6 to 7 cfm, 5 to 6 cfm
Air Inlet1/4'', 1/2"

 IMPACT WRENCH  KOBE MAKE MODEL NO-IW500

Description

IW500 - 1/2" Impact Wrench
One piece aluminium housing, 10 position power regulator, thumb switch for reversing, 1/4" NPT air inlet thread for 10mm air hose, 90psi air pressure, 300ft/lbs torque, 3.5cfm* air consumption, M16 bolt capacity.

Sound pressure level: 88dBA.
Vibration level: 4.2m/s2.
Overall length: 188mm.

*Based on a 15 second cycle per minute average use

 

  •  Overall Height 190mm
  •  Model Number IW500
  •  Actual Air Consumption 3.5 cfm (99   L/min)
  •  Overall Width 65mm


Air Tools Kobe Make

we are involved in supplying and exporting a broad range of Kobe Pneumatic Tools. Owing to their easy operations, low maintenance and durability, these tools are widely used for industrial and assembly applications. To meet the varying demands of our esteemed clients, we are offering a comprehensive range ofKobe Pneumatic Tools which includes pneumatic pistol drills, pneumatic drills, pneumatic grinders and numerous other tools that are listed as follows: Pneumatic Angle Grinders Pneumatic Mini Grinders Pneumatic Die Grinders Pneumatic Sanders Pneumatic Chisels Pneumatic Saws Pneumatic Polishers Pneumatic Wrenches Pneumatic Screwdrivers Pneumatic Ratchets Technical Specifications: Free Speed: 3300 rpm Working Torque: 2030 Nm (1500lb. ft.) Maximum Torque: 2300 Nm (1700lb.ft.) Air Pressure: 90 PSI (6.3 Bar) Air Consumption: 0.8 CFM Vibration Level: 5.9 ms/2 Overall Length: 500mm

Get Best QuoteRequest A Callback
Air Drill Pistol Model No- DP-513

Air Drill Pistol Model No- DP-513

Get Latest Price

Product Brochure

Product Details:
Max Hole Size12 mm
Air Pressure100 psi
Air Consumption6 CFM
BrandKOBE
TypeImpact Drill
Wheel Diameter6 inch, 4 inch, 8 inch, 7 inch, 5 inch
Chuck CapacitySTD
Type of GrinderAngle, Pencil, Die, Straight
Storage Tank Material(SS)STD
Working Torque Range NmSTD
Max Drill Depth30-40 mm, 20-30 mm, 0-10 mm, 10-20 mm, >50 mm, 40-50 mm
PowerSTD
Nominal Bolt Size CapacitySTD
Warranty6 months

Air Drill Pistol 13mm Heavy-Duty MODEL NO DP 513 Kobe MAKE

MODEL NO- DPR813 / ORDER CODE NO-KBE-270-1525F

Product Specification
Brand KOBE
Chuck Capacity 13mm.
Air Consumption 4cfm*.
Vibration Level 5.4m/s2
Overall Length 225mm.
Overall Width 44mm
Maximum No Load Speed 500rpm
Weight 1.5kg
Sound Power Level 101dBA.
Sound Pressure Level 89dBA.
Model No Kobe Red Line.DP513
Air Inlet Thread 1/4" NPT.
Minimum Hose 3/8" (10mm).
Spindle Thread 3/8" - 24.
Air Pressure 90psi/6.3bar.
Product Description13mm Jacobs chuck, high reduction gearbox, high torque, with side handle, 1/2hp motor.
Additional Information
Item Code KBE2701500E



13mm Jacobs chuck. High reduction gearbox, high torque, with side handle,. 1/2 HP motor. 1/4NPT air inlet thread for 10mm air hose.90PSI air pressure. 4CFM* air consumption. 3/8" - 24 spindle thread. Overall length 180mm.
*Based on a 15 second cycle per minute average use.

Get Best QuoteRequest A Callback
Straight Air Drill 10mm Model No D S 4510l ( Kobe Make )
  • Straight Air Drill 10mm Model No D S 4510l ( Kobe Make )
  • Straight Air Drill 10mm Model No D S 4510l ( Kobe Make )
  • Straight Air Drill 10mm Model No D S 4510l ( Kobe Make )
  • Straight Air Drill 10mm Model No D S 4510l ( Kobe Make )
  • Straight Air Drill 10mm Model No D S 4510l ( Kobe Make )
  • Straight Air Drill 10mm Model No D S 4510l ( Kobe Make )
  • Straight Air Drill 10mm Model No D S 4510l ( Kobe Make )
  • Straight Air Drill 10mm Model No D S 4510l ( Kobe Make )

Straight Air Drill 10mm Model No D S 4510l ( Kobe Make )

Get Latest Price

Product Brochure

Product Details:
Chuck CapacitySTD
TypeElectric Drill, Hammer Drill, Pillar Drill, Rotary Drill, Impact Drill
Max Hole Size15 mm, 5 mm, 10 mm, 13 mm, 12 mm
No Load Speed0-2000, 0-3000, 0-500, 0-4000, 0-1000
BrandKOBE
Max Drill Depth30-40 mm, 0-10 mm, >50 mm, 40-50 mm, 10-20 mm, 20-30 mm
Air ConsumptionSTD

Straight Air Drill 10mm MODEL NO D S 4510L ( Kobe MAKE )

ORDER CODE NO- KBE-270-1450N

Kobe Red Line.DS4510L 10mm Straight Air Drill
View :142

DS4510L 10mm Jacobs chuck, stall-resistant, safety lever throttle, high performance, planetary gearing, 3/8" - 24 spindle thread. Specifications: Air inlet thread: 1/4" NPT. Chuck capacity: 10mm. Spindle thread: 3/8" - 24. Minimum air hose size (ID): 3/8"(10mm). Air pressure: 90PSI/6.3Bar. Air consumption: 4CFM* (144ltr/min). Sound pressure level: 78dB(A). Sound power level: 96dB(A). Vibration level: 2.5m/s2. Overall length: 190mm. *Based on a 15 second cycle per minute average use.

 

10mm Jacobs chuck, stall-resistant, safety lever throttle, high performance, planetary gearing. 24 spindle thread.

Specifications: Air inlet thread: 1/4" NPT. Chuck capacity: 10mm. Spindle thread: 3/8" - 24. Minimum air hose size (ID): 3/8"(10mm). Air pressure: 90PSI/6.3Bar. Air consumption: 4CFM* (144 ltr/min). Sound pressure level: 78 dB(A). Sound power level: 96 dB(A). Vibration level: 2.5 m/s2. Overall length: 190mm.

*Based on a 15 second cycle per minute average use.

Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Jay Bee Enterprises. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.