- Home
- ยป
- Our Products
- »
- Boiler Mountings Valves
Boiler Mountings Valves
Boiler Mountings ValvesS S ,C S F S C I
A boiler is used to generate steam at a desired pressure and temperature by transferring heat produced by burning fuel to water to change it to steam.
Steam is used for the following purposes:
Power generation
Processing
Heating
Requirements of an efficient boiler
1) Should generate maximum amount of steam at a required pressure and temperature and quality with minimum fuel consumption.
2) Should be light in weight and should not occupy large space.
3) Should conform to safety regulations.
4) Should have low initial cost, installation cost and maintenance cost.
5) Should be able to cope with fluctuating demands of steam supply.
6) All parts and components should be easily accessible for inspection and repair.
Note: Only starting prices of products is available in website, else it varies as per the requirement of buyer, market value of product, and specification.
Bronze Pressure Reducing Valve I B R SANT MAKE
Minimum Order Quantity: 1 Piece
Product Brochure
Valve Size | up to 0.25 inch |
Media | Water, Gas, Fuel, Powder/Solids, Air |
Brand | QUINNE & W J NEETA/ sant / leader/ |
Automation Grade | Semi-Automatic |
I Deal In | New Only |
Condition | New |
Product Specification
Media | Water / Gas / Steam |
Material | Brass/Bronze |
Brand | Sant |
Model Name/Number | IBR-17 |
Body Material cum Standard | Bronze IBR 282(a)(iv) Gr.B |
Type of Seat | Integral |
Type of Disc | Renewable disc |
Trim | SS AISI304 Diaphragm |
End Details | Screwed female BSP Taper threads to BS 21. |
Hydraulic Test Pressure | 500 Psig.Hyd. |
Working Pressure | Max. Inlet 250 Psig.(17.58Kg/cm2) |
Maximum Working Temperature | 225 Degree Celsius |
Nominal Size (Inches) | 1/2 |
Minimum Order Quantity | 100 |
- Product : ‘SANT’ Bronze Pressure Reducing Valve
- Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
- Description : Spring Loaded outlet pressure range available 5/60, 20/80, 40/125 Psig
- Type of Seat : Integral
- Type of Disc : Renewable disc
- Trim : SS AISI304 Diaphragm
- End Details : Screwed female BSP Taper threads to BS 21.
- Hydraulic Test Pressure : 500 Psig.Hyd.
- Working Pressure : Max. Inlet 250 Psig.(17.58Kg/cm²)
- Maximum Working Temperature : 435°F (225°C)
Performance Test is carried out on live steam on all valves.
Test Certificate in Form lll-C as per IBR is furnished with every supply.
Additional Information:
- Item Code: 1056
- Packaging Details: MATERIALS OF CONSTRUCTION S. NO. PART'S NAME MATERIALS SPECIFICATIONS 1 ADJUSTING SCREW CARBON STEEL BS:916 2 LOCK NUT CARBON STEEL BS:916 3 YOKE BUSH BRONZE BS:1400 LG2 4 UPPER SPRING DISC S.G.I BS:2789 5 CHAMBER SPRING SPRING STEEL EN47 6 SPRING CHAMBER CAST IRON BS:1452 Gr220 7 BOLTS & NUTS CARBON STEEL BS:916 8 LOWER SPRING DISC BRONZE BS:1400 LG2 9 GASKET STEAM JOINTING ----- 10 SEAT CAP BRONZE BS:1400 LG2 11 MAIN VALVE STEM BRONZE BS:1400 LG2 12 BODY BRONZE BS:1400 LG2 13 BODY SPRING SPRING STEEL EN47 14 GASKET STEAM JOINTING ----- 15 BOTTOM COVER BRONZE BS:1400 LG2 16 PLUG BRONZE BS:1400 LG2 17 DIAPHRAGM S.S. AISI-304 18 TOMMY BAR CARBON STEEL ----- 19 COVER CAST IRON BS:1452 Gr220
Bronze Water Level Gauge I B R and NON IBR
Minimum Order Quantity: 1 Piece
Model Name/Number | I B R |
Measuring Range | 1/2" TO 1" |
Brand | QINN,W J NEETA,SANT,LEADER,ZOLOTO |
Material | BRONZE |
Usage/Application | in boiler |
Size | 1/2" TO 12 " |
Color | GOLDEN |
I Deal In | New Only |
Bronze Water Level Gauge
Bronze Flanged Asbestos Packed Water Level GaugeView Product Specifications
Product SpecificationsGENERALBrand: ZolotoMaterial: BronzeModel: 1048Product: Flanged Asbestos Packed Water Level GaugeSize: 15 mmSize 15 to 20 nb body bronze pressure17. 50 kg/cm²temperature200º cends screwed, flanged end
C I Butterfly Valves
Material | C I |
Brand | L & T , AUDCO,ZOLOTO |
Usage/Application | Industrial |
Pressure | High Pressure |
Power | Manual |
Operator | Lever, Electric Actuator |
Valve Size | 1" |
Media | Fuel, Powder/Solids, Air, Water, Gas |
Temperature of Media | Normal Temperature, Low Temperature, Medium Temperature, High Temperature |
Operation Type | By Gear, By Lever, By Motor, By Actuator |
Condition | New |
C I Butterfly Valves
GENERAL SPECIFICATIONS
a) PRESSURE RATING
b) TEMPERATURE RATING
c) END CONNECTIONS
d) TESTING
e) ACTUATION
: 10/16 KG/CM SQ.
: -20º c to +135ºC
: Wafer flangeless
: As per Is 13095-91
: By Hand-level/Worm Gear
Customers are requested to specify the above while ordering.
MATERIAL SPECIFICATIONS
A) BODY : IS 210 FG220 C.I.
B) DISC: IS 210 F G220 C.I. ; IS 1865 S G 450/10; ASTM A 216 WCB C.S. (epoxy Powder coated / electroless nickel plated); ASTM A 351 CF8/CF8M S.S.; IS 305 GRD 40 AB1 Al BRONZE.
C) SEAT: NITRILE; EPDM; NEOPRENE RUBBER.
D) SHAFT: IS 1570 GRD40 C8 C.S.; AISI 410 S.S.
INSTALLATION :
C & R Butterfly valves have been designed for installation between flanges drilled As per IS 1538. Valves can also be provided for installation between flanges drilled To ANSIB 16.5, DIN 2632/2633 BS 10 Table, IS: 13159. (user to specify for mentioned options)
Additional Information:
- Packaging Details: rior to installation the inside of the valves should be cleared of all foreign matter & the valve should be in the slightly open position but with the disc limited within the laying width of the body. ALL dimensions are in mm. The specifications are subject to change in the source of product development. 1. Single piece body 2. Streamlined disc 3. Disc hub face sealing 3. Rubber seat vulcanized on body 4. Primary and Secondary shaft seals integrated on seat. MOM.SIZE DIMENSION IN mm WEIGHT IN kg mm Inch 40 1.5 50 2 65 2.5 80 3 100 4 125 5 150 6 200 8 250 10 300 12 A" B" C" D" E" F" 33 49 85 144 262 90 44 64 123 187 262 90 47 69 129 198 262 90 47 78 132 210 262 90 54 93 151 244 262 90 57 105 167 273 262 90 57 121 180 310 262 90 64 150 220 370 262 90 70 189 266 455 --- 110 82 238 289 527 --- 110 HAND LEVER GEAR OPERATED 3.30 --- 4.28 4.32 5.03 5.07 5.11 5.96 7.08 7.89 9.81 10.47 10.02 12.12 14.87 16.80 23.57 28.30 30.82 35.55
Balancing Valves Honeywell Make
Minimum Order Quantity: 1 Piece
Size | 1/2 " to 2" |
Material | C I & brass |
Model Name/Number | V4-BLV-GP16. |
Brand | Honeywell |
Connections | 50 mm 2 " To 300 mm |
Inlet Outlet Size | 2 " |
Size | 50mm to 300mm |
Brand | Honeywell |
Nominal pressure | PN16 |
Medium | Water |
Shell Test pressure | 24 bar |
Disc Material | Stainless steel Disc |
Minimum Order Quantity | 1 Number |
Specifications:
- Brand: Honeywell
- Size : 50 to 300mm
- Item Code: V4-BLV-GP16
Product Image
C I Balancing Valves Honeywell Make
: Flanged
Type :
Metal Of Casting : Ci
Bronze Water Level Gauge (Sleeve Packed)
Minimum Order Quantity: 1 Piece
Material | BRASS, BRONZE |
Usage/Application | Water |
Pressure | High Pressure |
Valve Size | 1/2",3/4" 1" |
Power | Hydraullic |
Operator | Electric Actuator, Lever |
Media | Fuel, Gas, Water, Air |
Temperature of Media | Medium Temperature, Low Temperature, High Temperature, Normal Temperature |
Operation Type | By Lever, By Actuator, By Motor, By Gear |
(sleeve Packed)
Product Details :-square Body Standard Pattern ( Complete Set) 150 Psig Steam And Suitable Max. Temp. 428°f
End Details :- Screwed Male Ends (bsp) Parallel
Testing :-( Hyd)
Body Test Pressure :- 500 Psig
Seat Test Pressure :- 350 Psig
Bronze Water Level Gauge (Gland Packed)
Minimum Order Quantity: 1 Piece
Brand | QINN,RMD,W J NEETA |
Material | BRONZE,G M |
Usage/Application | IN BOILER |
Size | 1/2",3/4" 1 " |
Color | BRONZ |
Glass | TUBE |
Bronze Water Level Gauge
(gland Packed)
Product Details :-standard Pattern ( Complete Set) 150 Psig On Steam And Suitable Max. Temp. 428°f
End Details :- Screwed Male Ends (bsp) Parallel
Testing :-( Hyd)
Body Test Pressure :- 3o0 Psig
Seat Test Pressure :- 2o0 Psig
Materials Of Constructionpart No.part's Namematerialsspecifications1plugbronzebs:1400,lg22gasketsteam Jointingbs:1400,lg23upper Armbronzebs:1400,lg24glass Nutbronzebs:1400,lg25glass Bushbronzebs:1400,lg26glass Tubeglass-----7lower Armbronzebs:1400,lg28hex. Boltcarbon Steel------9drain Valvebronzebs:1400,lg210gland Nutbronzebs:1400,lg211glandbronzebs:1400,lg212gland Packinggraphited Asbestos-----13handlebronzebs:1400,lg214drain Nipplebrassbs:2874,cz:114 Dimensions In Mmnominal Sizealh(apx)15mm1/2' Bsp757520mm3/4' Bsp8868applicationswatersteamgasoilair
Pressure Reducing Valve IBR ( Spirex Make )
Media | Water, Powder/Solids, Gas, Air, Fuel |
Material | C S |
Brand | Spirex |
Valve Size | 2" onwards |
Condition | New |
Automation Grade | Semi-Automatic |
PRESSURE REDUCING VALVE
& Bellow Type Reducing Valve. Our product range also comprises of
Gate valves, globe valves and check valve.
MOCCI, IS 210 Gr. FG 260Sizes15 to 50 NBEnds15 to 25 (Scr.), 40 to 50 (Flanged)PMA13.0 Kg/cm²(g)TMA232º CMOCC.S. A 216 Gr. WCBSizes15 to 50, 80 NBEndsFlanged EndPMA42.0 Kg/cm²(g)TMA427º C
CI Butterfly Valve WITH I S I mark
Minimum Order Quantity: 1 Piece
Valve Size | 1/2" ON WORDS |
Media | Gas, Powder/Solids, Fuel, Air, Water |
Temperature of Media | Normal Temperature, High Temperature, Low Temperature, Medium Temperature |
Operator | Electric Actuator, Lever |
Condition | New |
Operation Type | By Lever, By Gear, By Motor, By Actuator |
Is It Customized | Customized |
Material | Stainless Steel |
C I Butterfly Valve WITH I S I mark
The control application in pumping systems attracted Normex to come out with control Valves i.e. Butterfly Valve. The Normex Butterfly Valve superseded the Gate Valve, Ball Valve and Globe Valve in most spheres of applications. Gas tight sealing with excellent control characteristics and uni directional flow has qualified Normex Valves by most of the industries. The centrally mounted disc, shafts and bearings has minimised head loss.It’s low weight and compact design has achieved acceptability in industries like Chemical and Petrochemicals, Watertreatment, Agriculture and many more.......
n Excellent flow control in quarter turn operation
n Low pressure drop
n Low weight, low maintenance, long service life
n 100% tight shut of
Quality Features
Excellent flow control in quarter turn operation.
Compact, space saving design.
Bi-directional1 00% tight shut off.
Low weight, low maintenance, long service life,
Easy automation / retrofit possible.
Stream lined valve disc for lower pressure drop.
Both shafts mounted in bearing supports for
easy operating torques.
Suitable for mounting between all standard
flanges.
Gasket packing not required to install between
flanges.
Sizes: 40mm to 400mm
Bronze Globe Stop Cum Non Return (sdnr) Valve - No. 8
Minimum Order Quantity: 1 Piece
Brand | LEADER, QINN, |
Usage/Application | Industrial |
Pressure | High Pressure |
Valve Size | 1/2" TO 12 " |
Material | Brass/Bronze |
End Connection | Screwed |
Media | Gas, Fuel, Powder/Solids, Air, Water |
Color | Golden |
Condition | New |
Bronze Globe Stop Cum Non Return (sdnr) Valve - No. 8
Product Details:-screwed In Bonnet, Inside Screw, Rising Stem Having Integral Seat & Brass Stem.
End Details :-flanged End To Bs:10 Table D/e; And Also Available In Pn-10/16, Jis 5k, 10k, On Demand.
Working Pressure :- Suitable For Hydraulic Line Bs:4504, Pn-10.
Testing Hydraulic :-
Body Test Pressure :- 300 Psig.
Seat Test Pressure :- 200 Psig.
APPLICATIONS WATERS TEAM GASOILAIR
Additional Information:
- Packaging Details: MATERIALS OF CONSTRUCTION PART NO. PART'S NAME MATERIALS SPECIFICATIONS 1 NUT CARBON STEEL BS:916 2 WASHER CARBON STEEL ----- 3 HAND WHEEL C.I. BS:1452 Gr.220 4 STEM BRASS BS:2872 CZ114 5 GLAND BRONZE BS:1400 LG2 6 GLAND NUT BRONZE BS:1400 LG2 7 PACKING ASBESTOS ... 8 BONNET BRONZE BS:1400 LG2 9 DISC BRONZE BS:1400 LG2 10 BODY BRONZE BS:1400 LG2 DIMENSIONS IN mm NOMINAL SIZE ???D ???B L(+1.5) T H (APX) W~ 15mm 95.3 14 56 6.30 76 64 20mm 101.6 18 69 6.30 83 64 25mm 114.3 23 85 8.00 96 76 32mm 120.7 30 90 8.00 112 85 40mm 133.4 38 100 9.50 125 100 50mm 152.4 47 109 9.50 134 100 65mm 165.1 63 140 11.20 164 125 80mm 184 76 170 12.70 190 125 100mm 216 97 200 15.80 215 150 125mm 254 121 ... 17.5 ... 250 150mm 280 145 260 17.5 320 260
Bronze Pressure Reducing Valve
Media | Gas, Water, Air |
Material | Brass |
Valve Size | 1" |
Pressure | Low Pressure,Medium Pressure,High Pressure |
Condition | Refurbished |
Automation Grade | Semi-Automatic |
Fluid Media | Water, Air, Gas, Fuel, Powder |
Product details:- self acting spring operated pressure reducing valve, the down pressure is actuated by the spring force acting on diaphragm
End details :-screwed female to bs:21
Testing (hyd.):- - body :- 18 bar
Seat :- 16 bar
Reducing pressure range :-0.8 bar to 8 ba
Leader Valves
Minimum Order Quantity: 1 Piece
Valve Size | up to 0.25 inch |
Size | 1/2 " |
Usage/Application | Water |
Material | Stainless Steel , BRASS, BRONZE, C S |
End Connection | Butt Weld, Screwed, Socket Weld |
Media | Gas, Air, Water |
Pressure | Medium Pressure, Low Pressure, High Pressure |
Body Style | Globe Type |
Power | Manual |
Certification | CE, EIL, IBR |
Brand | LEADER MAKE |
Automation Grade | Manual |
Condition | New |
Power Source | Hydraulic,Manual,Pneumatic |
LEADER VALVES LIMITED is a leading valve manufacturing company of India. a totally integrated valves manufacturing unit with our own Ferrous & Non Ferrous Foundries, Forging units and state of the art Machining and Testing facilities.
The company was set- up seven decades ago when India was on the threshold of industrial revolution and there were no good valve manufacturers in the country. It has over the years built up an excellent track record by following the policy of customer satisfaction through continual improvement in Designs, Manufacturing Processes and marketing products that are highly competitive, Safe and Harmless to the environment.
We are an ISO-9001:2015 company since Jan 1996 certified by LRQA, India. The company is also licensed to use API Spec 6D and API 600 monograms. Our Ferrous & Non-Ferrous foundries are PED certified by M/s. LRQA India & AD 2000-Merkblatt WO certified by TUV India. The Foundries are also adjudged as "Well Known FOUNDRY" under Indian Boiler Regulation 4C(2) of Central Boiler Board, Govt. of India. We also have IRS works approval certificate for Ferrous and Non Ferrous Foundry for casting of marine valves in accordance with the relevant requirements of Part 2, Chapter 4 & Chapter 8 of "Rules & Regulations for the Construction & Classification of Steel Ships". Our valves are certified by "FCRI" for functional and structural integrity for Seismic applications.
We are registered with all major clients in India and abroad. We are also the recipient of "The National award for Indigenisation" for the year 1996—1997 by the Ministry of Defence India for our contribution in indigenous ship building activities of the Indian Navy.
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,NEFT CASH CHEQUE
- Port of Dispatch: MUMBAI
Bronze Spring Loaded Safety Valve Open Discharge
Minimum Order Quantity: 1 Piece
Structure | Bronze Spring Loaded Safety Valve Open Discharge |
Material | BRONZE |
Media | Water |
Usage/Application | Industrial |
Size | 1 " TO 6 " |
End Connection | 1 " TO 6 " |
Condition | New |
Material | Bronze |
Brand | Qinn |
Product Details | High Lift, Integral Seat Type |
End Details | Screwed Male Ends Bsp Parallel/Taper Threads To Bs:21 |
Testing | 300 Psig. |
Temperature | 225 degree C. (437 degree F) |
Technical Specification:
Materials of construction | ||
Part''s name | materials | Specifications |
Stem | brass | BS:2872 CZ114 |
Hinge pin | s.s. | AISI-410 |
Cap | aluminum | ----- |
Adjusting screw | bronze | BS:1400 LG2 |
Chamber | bronze | BS:1400 LG2 |
Upper spring disc | bronze | BS:1400 LG2 |
Spring | spring steel | BS:1726 EN:47 |
Lower spring disc | bronze | BS:1400 LG2 |
Lever | cast iron | BS:1452 Gr220 |
Seat | bronze | BS:1400 LG2 |
Regulating bolt & nut | brass | BS:2872 CZ114 |
Regulating ring | bronze | BS:1400 LG2 |
Body | bronze | BS:1400 LG2 |
Locking nut | bronze | BS:1400 LG2 |
Dimensions in mm:
Dimension | ||
NOMINAL SIZE | ∅B | H~ |
15mm | 1/2"BSP | 190 |
20mm | 3/4"BSP | 222 |
25mm | 1"BSP | 225 |
40mm | 1.1/2"BSP | 262 |
50mm | 2"BSP | 345 |
Additional Information
Item Code | Q-121 |
Fusible Plug Bronze ( with IBR Certificate )
Minimum Order Quantity: 1 each
Brand | QINNE & W J NEETA |
Size | 1/2" To 1 1/2" |
Material | Bronz |
Color | GOLD |
Automation Grade | TWO TYPE OF VALVES AVAILABLE |
Media | BOILER |
Surface Finishing | BRONZ |
Fusible Plug Bronze ( with IBR Certificate )
Fusible Plug Bronze (with IBR Certificate)
Specifications
Size |
15 to 50 NB |
Body |
Bronze |
Type |
Single / Two Piece |
Pressure |
17.50 Kg/Cm² |
Temperature |
200º C |
Accessories
5 to 50 NBBodyBronzeTypeSingle / Two PiecePressure17.50 Kg/Cm²Temperature200º C
Steam Traps Spirax MAKE
Minimum Order Quantity: 1 Piece
Model Name/Number | TD 3 |
Material | Stainless Steel |
Pressure | AS PER STD |
Size | 1/2" Above size |
Brand | Spirax |
Available Design | TD 3 |
Port Size | 1/2",3/4,1< |
Customers can avail from us a wide range of Spirax Trap Valves in various sizes and other specifications. We offer these products in several specifications to our customers. Further, our vendors manufacture these products in accordance with the global quality standards. Thermostatic Steam Trap Valve with Integral Strainer Item Code: BPT-21 We are an eminent firm engaged in offering a wide range of Thermostatic Steam Traps Valve with Integral Strainer to the clients. These products are obtained from reliable vendors, who use superior grade raw material in the manufacturing process. To fulfill the diversified demands of our clients, we offer these products in various specifications. Further, we check these products on several parameters before final shipment. Specifications: MOC: ASTM A 105 Sizes: 15 to 20 NB Ends: Scr. BSPT/NPT/SW PMA: 21.0 Kg/cm² (g) TMA: 285º C
Additional Information:
- Delivery Time: Ex stock
CAST STEEL GATE VALVE
Model Name/Number | H |
Brand | L T , SANT, W J , SEALMECH |
Material | PVC, Brass, Stainless Steel |
Valve Size | 2 " |
Media | Fuel, Air, Gas, Water |
Size | 1/2" TO 12 " |
Temperature of Media | Normal Temperature, Medium Temperature, Low Temperature, High Temperature |
Product Specification
Size | 2" TO 14" |
Model | GATE VALVE CL 150 |
Brand | SANT/ L&T,/WJ |
Type | Gate Valve Flange |
Application | Industrial Usage, Water Industrial Usage |
Minimum Order Quantity | 1 Piece |
Cast Steel Globe Steam Stop Valve ND-40
Minimum Order Quantity: 1 Piece
Brand | Audco |
Body Material | Alloy Steel |
Usage/Application | Industrial |
Material | C S ,FORGED STEEL, CAST IRON |
End | Screwed Ends, Flanged End |
Condition | New |
product details:- bolted bonnet, outside screw & yoke type, rising stem with backseat arrangement, renewable stainless steel(aisi 410)trim, hand wheel operated. end details :- flanged ends as per bs:4504,part 1table 40/1 working pressure :- suitable for steam line nominal pressure rating pn-40, conforming to bs:5160/din 2401 testing:- hydraulic. body tested:- 76bar (1100psig. Hyd. ) seat tested:- 38bar ( 550 psig. Hyd. ) applications water steam gas oil air
Cast Iron Spring Loaded Single Post Safety Valve
Minimum Order Quantity: 1 Piece
Media | Water |
Cap Type | Spring Loaded Single Post Safety Valve |
Brand | QINN / W J NEETA / SANT / LEADERS |
Material | C I |
Size | SIZE 1/2 |
Usage/Application | Industrial |
Condition | New |
Cast iron spring loaded single post high lift safety valve(angle type) qinn make q-210
product details:-angle type with ss(aisi-410)/ monel seat and ss stem.
inlet-flanged to bs:10 table 'f'
outlet-flanged to bs:10 table 'd'
working :- max bop 150psig and max working temp 220° c
testing (hyd. )370 psig. Hydraulic.
materials of construction | ||||
part no. | part's name | materials | specifications | |
1 | cap | c. I. | bs:1452 gr220 | |
2 | cotter | bronze | bs:1400 lg2 | |
3 | lever | c. I. | bs:1452 gr220 | |
4 | locking nut | bronze | bs:1400 lg2 | |
5 | cover | c. I. | bs:1452 gr220 | |
6 | bush | bronze | bs:1400 lg2 | |
7 | adjusting screw | bronze | bs:1400 lg2 | |
8 | upper spring disc | c. I. | bs:1452 gr220 | |
9 | spring chamber | c. I. | bs:1452 gr220 | |
10 | stem | s. S. | aisi-410 | |
11 | lower spring disc | c. I. | bs:1452 gr220 | |
12 | bush | bronze | bs:1400 lg2 | |
13 | gasket | caf | ---------------- | |
14 | spring | spring steel | bs: 1726 en47 | |
15 | gasket | caf | ---------------- | |
16 | disc | s. S. | aisi-410 | |
17 | disc nut | bronze | bs:1400 lg2 | |
18 | screw and nut | brass | bs: 2874 cz114 | |
19 | body seat ring | s. S. | aisi-410 | |
20 | body | c. I. | bs:1452 gr220 | |
21 | regulating ring | bronze | bs:1400 lg2 | |
22 | bolts and nuts | carbon steel | bs:936 | |
23 | studs and nuts | carbon steel | bs:936 |
Additional Information:
- Packaging Details: Specifications Item Code Model a d s h k 11401 PTN 8 6 8 M 6 13 10 6 11402 PTN 10 8 10 M 8 15 12 6 11403 PTN 12 10 12 M 10 18 14 7 11404 PTN 14 10 14 M 10 22 16 8 11405 PTN 14 12 14 M 12 22 16 8 11406 PTN 16 12 16 M 12 25 18 9 11407 PTN 16 14 16 M 14 25 18 9 11408 PTN 18 12 18 M 12 28 20 10 11409 PTN 18 16 18 M 16 28 20 10 11410 PTN 20 16 20 M 16 32 24 12 11411 PTN 22 16 22 M 16 35 28 14 11412 PTN 22 20 22 M 20 35 28 14 11413 PTN 24 16 24 M 16 40 32 16 11414 PTN 24 20 24 M 20 40 32 16 11415 PTN 28 16 28 M 16 44 36 18 11416 PTN 28 20 28 M 20 44 36 18 11417 PTN 28 24 28 M 24 44 36 18 11418 PTN 36 24 36 M 24 54 44 22 11419 PTN 36 30 36 M 30 54 44 22
Bronze Fusible Plugs
Brand | QINN / W J |
Valve Size | 1/2" TO 2 " |
Size | 1/2" TO 2 " |
Media | Gas, Fuel, Water, Air |
Material | BRONZE |
Color | GOLDEN |
Certification | IBR |
Condition | New |
end details -screwed male end bsp taper to bs21 testing - 500psig. (hyd. ) melting temp. - melting temp. Of fussible alloy 270c materials of construction s. No. Part''s name materials specifications 1 cone bronze bs1400 lg2 2 fusible alloy pb sn alloy . . . 3 cone holder bronze bs1400 lg2 4 body bronze bs1400 lg2 dimensions in mm nominal size a h 15mm 1/2"bspt 53 20mm 3/4"bspt 56 25mm 1"bspt 70 32mm 1. 1/4"bspt 83 40mm 1. 1/2"bspt 89 50mm 2"bspt 100 applications water steam gas oil air
Bronze Fusible Plug
Minimum Order Quantity: 1 Piece
Brand | QUINN & W J NEETA |
Size | 1/2" TO 2 " |
Material | BRONZE |
Color | GOLDEN |
Automation Grade | I B R |
Corrosion Resistance | STEM BOILER BRONZE FUSIBLE PLUG |
Media | STEM BOILER BRONZE FUSIBLE PLUG |
Castle Make Balancing Valves
Minimum Order Quantity: 1 Piece
Size | 1/2" TO 12 " |
Material | BRASS , C I BODY |
Brand | Honeywell |
Connections | 1/2" TO 12 " |
Inlet Outlet Size | 1/2" TO 12 " |
Media | WATER , STEM, AIR |
Pressure Range | AS PER STANDER |
Brass Balancing Valves Castle Make
Screwed Ends
Type :
Metal Of Casting : Brass
Bronze Air Release Valve
Minimum Order Quantity: 1 Piece
Working Temp | STD |
Model Name/Number | QINN -20 |
Size | 1/2" ,3/4/ |
Brand | QINN |
Material | BRASS |
Media | Water, Gas, Air |
Pressure | Low Pressure, Medium Pressure, High Pressure |
Power | Hydraulic |
Qinn Bronze Air Release Valve
Material | Bronze |
Brand | Qinn |
Media | Water, Oil |
Body Tested | 250 Psig |
Seat Tested | 150 Psig |
Technical Specification:
PART''S NAME | MATERIALS | SPECIFICATIONS |
CAP | BRONZE | BS:1400, LG2 |
RETAINER | BRONZE | BS:1400, LG2 |
BODY | BRONZE | BS:1400, LG2 |
BALL | RUBBER | NITRILE |
Dimensions in mm:
NOMINAL SIZE | A | H~ |
25mm | 1" BSP | 110 |
40mm | 1.1/2" BSP | 130 |
50mm | 2" BSP | 150 |
Additional Information
Item Code | Q-45 |
Q-45
Product Details :- Spherical Nitrile Ball , Self Operating, Covered Exhaust.
End Details :-male Screwed End Bsp To Bs:21
Working :- Vertical Installation In Water Sewage Line Of Long Distance To Accumulate Air Resistance. To Get Best Performance, This Valve To Be Mounted On High Points Of The Line, Having Periodic Intervals To Each Other.
Testing :- Hydraulic.
Body Tested :- 250 Psig.
Seat Tested :- 150 Psig.
MATERIALS OF CONSTRUCTIONPART NO.PART'S NAMEMATERIALSSPECIFICATIONS1CAPBRONZEBS:1400, LG22RETAINERBRONZEBS:1400, LG23BODYBRONZEBS:1400, LG24BALLRUBBERNITRILEDIMENSIONS IN mmNOMINAL SIZEAH~25mm1' BSP11040mm1.1/2' BSP13050mm2' BSP150APPLICATIONSWATERSTEAMGASOILAIR
GUN METAL Safety Valves I B R / NON I B R
Media | Air |
Brand | QINN,W J NETA,ZOLOTO |
Material | BRONZE,C S,C I |
Size | 1/2" TO 12 " |
Usage/Application | Industrial |
Color | GUN METAL |
Product Type | GUN METAL Safety Valves I B R / NON I B R |
The valve which opens automatically when the pressure reaches the dangerous level is Safety Valve. Manufacture from superior quality iron and steel that provides desirable strength and longer performance life. These are durable, easy to install, leak proof, requires less maintenance and provides protection from excess pressure that generates in gas, air, liquid and steam lines. Various industries that require the application of safety valves are nuclear power, petrochemical, pharmaceutical, oil & gas, defense, sugar and many more. Our range includes solenoid valve, air vent valves, ball type foot valve, flush bottom valve, air release valve, foot valve and rotatory air lock valve.
Size | 15 to 50 NB | ||||
Body | Bronze | ||||
Type | Open & Enclosed | ||||
End Con. | Screwed End, Flanged End | ||||
Pressure | Max. Set 17.5 Kg/Cm² |
KARTAR MAKE Wafer Type Metallic Butterfly Valve
Minimum Order Quantity: 1 Piece
Nominal Size | 2 inch, 3 inch |
Color | Blue |
Brand | kartar |
Size | 2" to 24" |
Material | C I |
Power | Manual |
Single Hose Length | 20m-30m |
Condition | New |
Diameter | 2" o 24" |
Wafer Type Metallic Butterfly Kartar Make Valve
Material | Cast Iron |
Pressure | Medium Pressure |
Brand | Kartar |
Finishing Type | Color Coated |
Temperature of Media | Medium Temperature |
Automation Grade | Manual |
Color | Blue |
Product Code | K-701 / K-702 |
Keeping in mind the vast necessities of the patrons, we are engaged in providing a wide range of Wafer Type Metallic Butterfly Valve.
Product Features:
- DN 50 to DN 600, PN 10 & PN 16
- Temperature Range 34°C to 150°C
- No part in contact with fluid except disc and liner
- Self lubricated bushes
- Neck flange according to ISO:5211
- Direct Actuator mountable design
- Design reference IS:13095 & BS:5155
- Neck height to accommodate insulation
- Lugs on body make them suitable for using at the end of line
- Suitable for actuator & gear mountings
- 100% leak tight design
- Available in lever type and clutch type handles
Composition:
S.No. | Components | Material |
---|---|---|
1 | Body | Cast Iron, SG Iron (Ductile), Cast Carbon Steel, Stainless Steel, Bronze |
2 | Disc | SG Iron (Ductile), Stainless Steel |
3 | Liner | Nitrile, Neoprene, EPDM, Silicon, Buna N |
4 | Upper & Lower Stem | Stainless Steel AISI 410, AISI 304 |
5 | Bushing | Teflon or Nylon |
6 | O Rings | Nitrile |
7 | Circlips | Spring Steel |
Application:
Paper & Pulp Industry, Waste & Effluent Treatment Plants, Water Treatment, Chemical & Sugar Industry, Fire Fighting, Drilling Rigs, Heating & Air Conditioning, Cooling Water Circulation, Compressed Air, Civil Constructions & numerous other.
Cast Iron Reflux Valve (Swing Check Type) SANT MAKE
Minimum Order Quantity: 1 Piece
Product Brochure
Valve Size | 2" TO 24" |
Material | Cast Iron |
Media | Water |
Usage/Application | Industrial |
Brand | KARTAR |
Pressure | STD |
Finishing | Painted |
End Connection | FLANGED END |
Design Type | STD |
Size | 2 " TO 24" |
Load Capacity | STD |
Color | BLACK |
Cast Iron Reflux Valve (Swing Check Type) SANT MAKE
Product DescriptionHSN : 84813000
Product : ‘SANT’ Cast Iron Reflux Valve Swing Check Type (Non Return Valve)
Pressure Rating: PN16
Product Standard : IS:5312
Type of Pattern : Straight Type
Body Material cum Standard : Cast Iron IS:210 Gr.FG200
Description : Bolted Cover
Type of Seat : Integral / Renewable seat
Type of Disc : Renewable disc
End Details : Flanges as per IS:1538
Testing & Certification
Body Test Pressure : 2.4MPa Hyd.
Seat Test Pressure : 1.6MPa Hyd.
Our Works’ Test Certificate is furnished with every supply.
MaterialsComponents | Materials | Specifications |
---|---|---|
Body, Cover, Hinge, Disc | Cast Iron | IS:210 Gr.FG200 |
Bolts & Nuts | Carbon Steel | IS:1363 PART 1/3 |
Gasket | Rubber | IS:638 Type B |
Hinge Pin | Stainless Steel | AISI-410 |
Disc Facing | Rubber | IS:638 Type B |
Body Seat Ring | Leaded Tin Bronze | IS:318 Gr.LTB2 |
Stud & Nut | Carbon Steel | — |
Nominal Size | Nominal Size (Inches) | F | H (Approx.) |
---|---|---|---|
50 | 2 | 203±2 | 135 |
65 | 2.1/2 | 216±2 | 150 |
80 | 3 | 241±2 | 160 |
100 | 4 | 292±3 | 186 |
125 | 5 | 330±3 | 225 |
150 | 6 | 356±3 | 240 |
200 | 8 | 495±3 | 290 |
250 | 10 | 622±4 | 340 |
300 | 12 | 698±4 | 398 |
1. Product images are for illustration purposes only. Actual product may vary.
2. Actual dimensions may change over time, due to continual design improvements. Please confirm before placing order.
SS Ball Valves (Fire Safe)
End Connection Type | Flanged |
Material | Brass, Stainless Steel, Casting, Plastic |
Branded (Y/N) | Yes |
Media | Water, Fuel, Air, Gas |
Pressure | Low Pressure,Medium Pressure,High Pressure,Vacuum |
Temperature of Media | Normal Temperature, High Temperature, Low Temperature, Medium Temperature |
Automation Grade | Manual |
Is It Branded | Branded |
Fire Safe | Yes |
Branded | L & T |
Condition | New |
S S / C S BALL VALVES (FIRE SAFE)Salient FeatureMeet design requirement standard of ASME B 16.34 / BS 5351 /API 6D / ISO -14314 and testing requirement standard BS 6755 / API 598 / ISO 5280 /API 6D.
Fire safe testing comforts to API 607 /API 6FA and BS 6755.
Fire safe design: - valves' fire safe is designed in accordance with API 607. when non-metal sealing
material are decomposed by plant fire the ball comes into contact with the edge of the metal seat ofthe body or connecter by the line pressure in the upstream to shut off the line fluid to minimize internal leakage through the valve bore (port).
Soft seating recommended for service temperature up to 220'c. Metal to metal seating offered for higher temperature.
PTFE seats are located in grooves well protected against damage and cold flow of seal under pressure. The metal lip acts as a secondary metallic seat in fine safe design.
Anti static devices ensures electrical continuity between ball, stem & body.
Flexible lip-seats compensate for wear and changes of pressure.
Anti blow out stem construction.
Long operation life with low torque design.
Zero leakage from gland side due to PTFE"V"- shape gland packing.
A bottom back seals enabling repacking when the valves are under pressure.
Trunnion mounted ball provide for more then 4" size in higher class.
Specially designed die-formed graphite packing controlled clearances between stem and gland for guaranteed low emission meets 100 PPM maximum Fugitive emission levels.
Ball is heart of ball valves. Low operating due to mirror finish surface of ball controlled Sphericty up to 0.02 mm.
Bearing pads fix the ball and absorb total thrust of the medium relieving the down stream sealing of the load.
A valve with trunnion supported ball having two floating & spring loaded seats, In closed position they provide blockage of flow from both end when the cavity Pressure is drained.
Flange end dimensions conforms to ASME B 16.5/ API 605/ BS 3293 /DIN.
Face to face end dimensions conforms to ASME B 16.10 / API 6D.Face to face end dimensions conforms to ASME B 16.10 / API 6D.
Butt welding end dimensions conforms to ASME B 16.25.
Option
Electro less Nickel coated ball are also available on request.
Locking arrangement design in request.
Gear, electric actuator or pneumatic actuator available.
Extended gland designed provided for low temperature and cryogenic services (cold box and non cold box applications) to conform to requirement of BS- 6364.
Sealant injection design available on customer request.
Ring joint facing available in higher class.
New Developed
Metal to Metal High Pressure Ball Valve on request.
Ball Valve 1500# 2500# Class Design on request.
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,NEFT CHEQUE
- Delivery Time: EX STOCK
Breather Valve Bronze ( Terrace Valve)
Size | 1/2" top 2" |
Media | Air, Water, Gas |
Pressure | High Pressure, Medium Pressure, Low Pressure |
Temperature of Media | Low Temperature, Medium Temperature, Normal Temperature, High Temperature |
Condition | New |
Material | Brass |
Q-75
Qinn Bronze Breather Valve
(terrace Valve)
Product Details:- Spring Loaded, Self Operated, Aluminum Disc, Integral Seating And Covered Exhaust
End Details:- Screwed Female End Bsp To Bs:21
Working:- For Preventing Vapour Loss In Chemical Process Industries Or Vessels Containing Petrol,thiner,spirit Etc. MATERIALS OF CONSTRUCTIONPART NO.PART''S NAMEMATERIALSSPECIFICATIONS1BONNETBRONZEBS:1400 LG22SEATBRONZEBS:1400 LG23RETAINERBRONZEBS:1400 LG24DISCALUMINIUM...5SPRINGSTAINLESS STEELAISI-3046BODYBRONZEBS:1400 LG2DIMENSIONS IN mmNOMINAL SIZE∅AH~40mm1.1/2'' BSP96.050mm2'' BSP96.0APPLICATIONSWATERSTEAMGASOILAIR
Bronze Thermodynamic Steam Trap
Minimum Order Quantity: 1 Piece
Pressure | AS PER STD |
Size | 1/2" to 3" |
Brand | QINN, ZOLOTO,, |
Material | Brass & Bronze & C I,& S Sb |
Model Name/Number | STEAM TRAP |
Available Design | Thermodynamic |
Color | GOLD |
product details :- with s. S. (aisi 410) working parts and (aisi 304) non magnetic perforated screen. end details :- female ends bsp to bs:21 testing :- shell test pressure:300 psig. working pressure :- suitable for steam pressure min. 76 psig. , max. 200 psig. materials of construction part no. part's name materials specifications 1 seat cover carbon steel chrome plated 2 disc s. S. aisi-410 3 seat s. S. aisi-410 4 body bronze bs:1400 lg2 5 screen s. S. aisi-304 6 screen plug carbon steel chrome plated 7 gasket c. A. F ----- 8 name plate aluminium ----- dimensions in mm nominal size ∅b l h~ 15mm 1/2' bsp 82 60 20mm 3/4' bsp 88 60 25mm 1' bsp 110 70 applications water steam gas oil air
S S Three Piece Ball Valves
Minimum Order Quantity: 1 Piece
Pressure | Low Pressure, AS PER, High Pressure, Medium Pressure, Vacuum |
Temperature of Media | Low Temperature, High Temperature, Medium Temperature, Normal Temperature |
Automation Grade | Manual |
Power | Hydraulic, Manual, Pneumatic |
Condition | New |
Fire Safe | Yes |
Port Size | 1/2 " ON WORDS |
Size | 2 inch, 3 inch, 3/4 inch, 1 inch, 1/2 inch |
Material | Brass, Plastic, Casting, Stainless Steel |
Application | Structure Pipe, Gas Pipe, Hydraulic Pipe, Chemical Fertilizer Pipe, Pneumatic Connections |
Valve Size | 1/2 " TO 12 " |
Media | STEAM, Gas, Air, Water |
S S Three Piece Ball Valves
Salient Feature
The valves are designed to ensure that ball port fully aligns with body throat port in fully open position.
The blow out proof over size steam operated the valve safety even at high differential pressure a seal enabling replacement of gland packing even when valve may under pressure.
Bi- directional shut off
Ball is a heart of ball valves. Owing to the accurate manufacturing the ball is extremely spherical. Its mirror finish surface increase the sealing life and low operating torque.
High flow capacity with negligible pressure loss.
Unique flexible lip seats exert continues sealing pressure automatically compensate for wear and for changes in temperature & pressure, and provide extremely high cycle life.
Full port valve offers and resistance to flow operation is always easy, even when valves are operated infrequently.
The valve wrench (handle) is always parallel the flow passage of the valve.
Joints between bodies and body connectors in the case of flanged valve do not affect normal bolting or unbolting connection pipe works.
Body design provides adequate resistance against any permanent distortion under hydrostatic test and working condition.
Screwed end valves intended for assembly with pipe threads according to IS-554/BSP thread.
Flanged end valves are supplied undrilled unless other wise specified by the customer at the time of placing order with us along with standard in which drilling is desired
Option
Design available with mounting pad conforming to ISO for easy actuator adaptation.
Electro less nickel plating ball are also available on request.
Locking arrangement
Gear box, electric or pneumatic actuator design available
Single Piece, Two piece design available on request
We can offer valves under X-ray quality on request
CONSTRUCTION :3 Piece full bore, reduce bore, blow out proof stem , Floating ball, fire safe /non fire safe design.MANUFACTURING STD :BS 5351/BS 5159/API 607/API 6DINSPECTION TEST STD :BS 6755/ API 598/ ISO 5208FACE TO FACE:ASME B 16.10/ API 6D/ ISO - 14313END CONNECTION :Flanged to ASME B-16.5 RF 150#, Flanged to ASME B-16.1 FF 125#, Socket to ASME-B-16.11, Screwed to BSP/NPT/BSPT
Additional Information:
- Packaging Details: STANDARD COUPLER SERIES Quick Coupler - Hose Stem End SERIES H d L1 L2 D QCH 3/8 3/8" 8 37 25 24 o QCH 1/2 1/2" 9 37 25 24 o H=Hose Pipe Size
Moisture Separators W J Neta / Spriex Make
Minimum Order Quantity: 1 Piece
Model Name/Number | STEAM |
Brand | SPRIEX |
Material | C I , C S |
Shape | STANDAR |
Size/Dimension | 2 " TO 8" |
Condition | New |
Moisture Separators W J Neta / Spriex Make
Flanged Ends Product Description
The offered range of Steam Moisture Separator are known for their unmatched quality and unbeatable price in market. These are available with horizontal design for steam application with negligible pressure drop. Automatic drain with isolation valve can be provided as per the requirements of clients. Our client can avail these Moisture Separators at affordable price in market.
Specifications:
- Pressure Range: Up to 63 Kg/Cm2
- Sizes: 25mm to 300mm
- Media: Steam
Product Image
Type :
Metal Of Casting : Ci
Additional Information:
- Packaging Details: Specification Model LDV-1000 LDV-2000 LDV-3000 Maximum Working Pressure 10 Kg/cm2 16 Kg/cm2 16 Kg/cm2 Minimum Working Pressure 2 Kg/cm2 2 Kg/cm2 2 Kg/cm2 Maximum discharge Quantity 25 litres/hr 135 litres/hr 535 litres/hr Capacity upto 250 cfm upto 1000 cfm upto 2000 cfm Weight 1.25 Kg 3 Kg 12 Kg Fluid Temperature 75 C 75 C 75 C Class of protection IP55 IP55 IP55 End connection Inlet 1/2" (F) BSP 1/2" (M) BSP 1/2" (M) BSP End connection Outlet 6mm Hose barb 1/2" (F) BSP 1/2" (F) BSP Voltaqe 85 to 265 V 85 to 265 V 85 to 265 V AC 50/60 Hz, lPh AC 50/60 Hz, lPh AC 50/60 Hz, lPh Power consumption 12 Watts 12 Watts 12 Watts Test/Manual override button Automatic Drain Valves Automatic Drain Valves Automatic Drain Valves Intelligent Controller Automatic Drain Valves Automatic Drain Valves Automatic Drain Valves Dimension L x B x H 115 x 100 x 100 220 x 115 x 165 270 x 270 x 410 Valve orifice 4 mm 8 mm 8 mm
Boiler Mountings valves
Usage/Application | FOR STEM LINE & BOILER USE |
Thickness | AS PER STD |
Type | GAT, GLOBE |
Boiler Type | Hot Water |
Material | BRONZE |
Size | 1 inch |
Thread Size | 1/2" TO 12 " |
Brand | QINN / W J |
Boiler Mountings valves
A boiler is used to generate steam at a desired pressure and temperature by transferring heat produced by burning fuel to water to change it to steam.
Steam is used for the following purposes:
Power generation
Processing
Heating
Requirements of an efficient boiler
1) Should generate maximum amount of steam at a required pressure and temperature and quality with minimum fuel consumption.
2) Should be light in weight and should not occupy large space.
3) Should conform to safety regulations.
4) Should have low initial cost, installation cost and maintenance cost.
5) Should be able to cope with fluctuating demands of steam supply.
6) All parts and components should be easily accessible for inspection and repair.
Bronze Parallel Slide Blow Off Valve
Minimum Order Quantity: 1 Piece
Finishing Type | Flanged Ends To Bs-10 Table 'H' |
Size | 2 " TO 12 " |
Model Name/Number | qinn |
Ambient Temperature | h |
Bore Number | Bronze |
Medium | Water |
Usage/Application | for boil |
Product Specification
Media | Water |
Material | Bronze |
Brand | Qinn |
Product Details | Rack & Pinion Operated With Renewable Ss Working Parts And Tight Shut Off Type |
End Details | Flanged Ends To Bs-10 Table 'H' |
Working | Suitable For Steam Up To 250 Psig |
Testing | 500 Psig.Hydraulic |
Technical Specification:
Materials Of Construction | ||
Part''s Name | Materials | specifications |
Bonnet | Bronze | BS:1400,LG2 |
Rack | Bronze | BS:1400,LG2 |
Studs & Nuts | Carbon Steel | BS: 916 |
Body | Bronze | BS:1400,LG2 |
Gasket | Caf | STEAM JOINT |
Body Seat Ring | S.S. | AISI-410 |
Male Disc | S.S. | AISI-410 |
Female Disc | S.S. | AISI-410 |
Spring | S.S. | AISI-304 |
Pinion | Bronze | BS:1400,LG2 |
Gland | Bronze | BS:1400,LG2 |
Packing | Caf | STEAM JOINT |
Stuffing Box | Bronze | BS:1400,LG2 |
Dimensions in mm:
Dimension | |||||
NOMINAL SIZE | NB | D | L+1.5 | T | H |
25mm | 25 | 121 | 169 | 14 | 150 |
40mm | 38 | 140 | 190 | 18 | 205 |
50mm | 46 | 165 | 206 | 20 | 206 |
Additional Information
Item Code | Q-116 |
Product Details -rack & Pinion Operated With Renewable Ss Working Parts And Tight Shut Off Type. End Details -flanged Ends To Bs-10 Table 'h' Working -suitable For Steam Up To 250 Psig. Testing - 500 Psig.hydraulic. APPLICATIONS WATERSTEAMGASOILAIR
Additional Information:
- Packaging Details: MATERIALS OF CONSTRUCTION PART NO. PART'S NAME MATERIALS SPECIFICATIONS 1 BONNET BRONZE BS:1400,LG2 2 RACK BRONZE BS:1400,LG2 3 STUDS & NUTS CARBON STEEL BS: 916 4 BODY BRONZE BS:1400,LG2 5 GASKET CAF STEAM JOINT 6 BODY SEAT RING S.S. AISI-410 7 MALE DISC S.S. AISI-410 8 FEMALE DISC S.S. AISI-410 9 SPRING S.S. AISI-304 10 PINION BRONZE BS:1400,LG2 11 GLAND BRONZE BS:1400,LG2 12 PACKING CAF STEAM JOINT 13 STUFFING BOX BRONZE BS:1400,LG2 DIMENSIONS IN mm NOMINAL SIZE NB D L+1.5 T H 25mm 25 121 169 14 150 40mm 38 140 190 18 205 50mm 46 165 206 20 206
Bronze Controllable Feed Check Valve
Brand | QINNE & W J NEETA |
Media | Fuel, Powder/Solids, Air, Gas, Water |
Size | 1 " TO 6" |
Certification | IBR |
Condition | New |
Material | Brass/Bronze |
Product Details:-straight Pattern, Screwed In Bonnet, Out Side Screw & Yoke Type With Renewable Stainless Steel Working Parts(bolted Bonnet For 40mm & 50mm)
End Details :-screwed Female Bsp Taper Threads To Bs:21
Working Pressure :- Suitable For Steam Line Up To 250 Psig (17.58kg/cm² G) Max Working Temp. 437º F (225º C)
Testing Hydraulic :-
Body Test Pressure :- 500 Psig (35.15 Kg Cm²) Hyd
|
Additional Information:
- Packaging Details: MATERIALS OF CONSTRUCTION PART NO. PART'S NAME MATERIALS SPECIFICATIONS 1 NUT & STUD CARBON STEEL BS:916 2 WASHER CARBON STEEL ----- 3 HAND WHEEL C.I. BS:1452, Gr.220 4 STEM S.S. AISI 410 5 BONNET BRONZE BS:1400 LG2 6 GLAND BRONZE BS:1400 LG2 7 PACKING GRAPHITED ASBESTOS ----- 8 BODY BRONZE BS:1400 LG2 9 DISC S.S. AISI 410 10 BODY SEAT RING S.S. AISI 410 DIMENSIONS IN mm NOMINAL SIZE ???B H~ L+1 ???W 15mm 1/2"BSPT 115 83 78 20mm 3/4"BSPT 115 95 86 25mm 1"BSPT 138 111 86 32mm 1.1/4"BSPT 160 133 110 40mm 1.1/2"BSPT 170 152 125 50mm 2"BSPT 195 178 150
Check Valve Swing Type
Media | Air, Powder/Solids, Fuel, Gas, Water |
Pressure | Low Pressure |
Condition | New |
End Connection | Screwed, Socket Weld |
Power Source | Pneumatic, Hydraulic, Manual |
Automation Grade | Semi-automatic |
Power | Manual |
Material | Carbon Steel,Stainless Steel,Mild Steel |
Gun Metal Gauge Glass Cock
Minimum Order Quantity: 1 Piece
Size/Dimension | 1)2" & 3/4" |
Material | GUN METAL & BRONZE |
Valve Size | 1/2" TO 3/4 " |
Construction | SCREWED & FLANGES |
Brand | QINNE/ W J |
End Connection | 1/2" & 3/4" |
Condition | New |
Product Specification
Material | GUN METAL & BRONZE |
Size/Dimension | 1)2" & 3/4" |
Brand | QINNE/ W J |
End Connection | 1/2" & 3/4" |
Condition | New |
Minimum Order Quantity | 1 Piece |