EXPLORE MORE CATEGORIES
- Home
- »
- Our Products
- »
- Industrial Valves
Industrial Valves
We are involved in offering an extensive array of Industrial Valve to our prestigious clients across the country. Our range is designed in keeping the specifications provided by them in the mind. The valves are widely demanded by the clients due to the unmatched performance and longer life span.
Note: Only starting prices of products is available in website, else it varies as per the requirement of buyer, market value of product, and specification.
Note: Only starting prices of products is available in website, else it varies as per the requirement of buyer, market value of product, and specification.
AUTOMATIC AIR RELIEF VALVE ( AIR VENT VALVE ) TIEMME MAKE IMPORTED
Product Price: Rs 800 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Valve Size | 1/2 inch |
| Type Of Collector | SILVER |
| Material | BRASS |
| Media | 1898 / 1898G34 / 1899 / 1900 / 1900G / 1900N34 / 1900G34 |
| Application | AUTOMATIC AIR VENT VALVES |
AUTOMATIC AIR VENT VALVES TIEMME MAKE
1898 / 1898G34 / 1899 / 1900 / 1900G / 1900N34 / 1900G34AUTOMATIC AIR VENT VALVES
DESCRIPTION
Automatic air vent valves are used in heating and cooling systems toeliminate air that has been trapped in the circuits during filling or hasformed during normal operation.This series of valves is characterised by its compact size and lockingcap on the air venting device.Operating principle: The presence of air in the system reduces the levelof water contained in the relief valve, resulting in the float loweringand the gas discharge device opening. Otherwise, if there is no air inthe circuit, the water inside the relief valve keeps the float in such aposition that the gas discharge device remains closed.
Eliminating the air in the circuits avoids problems such as noise in thesystem and wear of its components, to ensure better performance ofthe radiant terminals, resulting in a consequent reduction in operatingcosts (to learn more, see the "INFORMATION FROM TIEMME" sectionof this technical data sheet).
ADVANTAGES / STRENGTHS
Automatic air release operation. Maximum discharge pressure 4 bar. Guarantees better performance of the system with a consequentreduction in management costs. Avoids issues with noise in the system and component wear. Compact size Equipped with locking cap on the air venting device. Wide range available, to meet all installation needs:- Bottom fitting / side fitting- Vertical venting / side venting- Reduced diameter versions
CONSTRUCTION SPECIFICATIONS (1) Body: Yellow/nickel-plated CW617N Brass (two versions) (2) Cover: Yellow/nickel-plated CW617N Brass (two versions) (3) O-ring seals: EPDM (4) Float: PP (5) Linkage: POM (6) Flange: POM (7) Obturator: EPDM (8) Spring: AISI 302 stainless steel (9) Cap: PA Threads: ISO 228TECHNICAL SPECIFICATIONS Maximum working temperature: +110 °C Maximum working pressure: 10 bar Maximum discharge pressure: 4 bar Fluid compatibility: Water and glycol solutions (maximum percentage of glycol 30%)
CONSTRUCTION SPECIFICATIONS (1) Body: Yellow/nickel-plated CW617N Brass (two versions) (2) Cover: Yellow/nickel-plated CW617N Brass (two versions) (3) O-ring seals: EPDM (4) Float: PP (5) Linkage: POM (6) Flange: POM (7) Obturator: EPDM (8) Spring: AISI 302 stainless steel (9) Cap: PA Threads: ISO 228TECHNICAL SPECIFICATIONS Maximum working temperature: +110 °C Maximum working pressure: 10 bar Maximum discharge pressure: 4 bar Fluid compatibility: Water and glycol solutions (maximum percentage of glycol 30%
Additional Information:
- Production Capacity: STD
- Delivery Time: EX STOCK
- Packaging Details: STD
Yes! I am InterestedRequest A Callback
Brass Air Vent Release Valves
Product Price: Rs 200 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Model Name/Number | STD |
| Size | 1/2",3/4" 1 " |
| Type Of Collector | SCREWED |
| Material | BRASS |
| Color | GOLD |
| Media | STEM |
| Packaging Type | STD |
| Country of Origin | Made in India |
BRASS AIR RELEASE VALVE (SCREWED
|
|||||||||||||||||||||
|
|||||||||||||||||||||
Yes! I am InterestedRequest A Callback
CI Foot Valve Ball Type Normax Make
Product Price: Rs 1,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Size | 1/2" TO 12 " |
| Color | Blue |
| Model Name/Number | B-05(N) |
| Material | Cast Iron |
| Installation Type | Vertical |
| Condition | New |
| Connection Type | Thread |
| Brand | NORMEX |
C I Foot Valve Ball Type NORMAX MAKE
Normex Ball Foot Valve (Flanged)
Product Specification
| Size | 50 mm to 300 mm |
| Model | B-05(N) |
| Brand | Normex |
| Pressure Rating | PN 1.6 |
| Temperature | Up to 80 C |
| Body Material | Cast Iron (CI) |
| Installation | Vertical/Horizontal |
In the application where foot valve is involved, the main concern of the user is draining of water by the foot valve. This calls for the priming of the the pump which is time consuming tedious job. If the on-off frequency is more, the trouble rises multifolds. A heavily leaking footvalve can also give rise to start up trouble to pump as suction line is empty. A leaking footvalve can cause not only time wastage but also delay in process industry where water is required at particular instant.
In typical case of Fire Fighting application, if the foot valve leaks, the pump is not started can cause damage to property as well as life. Even in application in irrigation / agriculture sector, where electricity is available for limited time, intermittent priming of the pump every time, day and night, is not possible.
With Ball Foot Valve (Threaded or Flanged) installed, priming is totally avoided. Normex Ball Foot Valves are recommended by many Plumbing, Fire, HVAC & Irrigation contractors and consultants for their life-long reliability.
Product Image
Flanged foot valve is heavy duty foot valve having all the advantages of standard ball NRV & threaded valve foot valve.
Sizes : 25 - 350 mm, working pressure 10/15 kg/cm2
Part List / Materials of Construction
Part
Description
Material
1.
Body
Cast Iron
2.
Strainer
Cast Iron
3.
Ball
Nitrile Rubber
4.
Seal Ring
Nitrile Rubber
5.
Fastener
Carbon Steel
Yes! I am InterestedRequest A Callback
C S Y Type Strainer
Product Price: Rs 999 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Material | C S,C I,F S |
| Size/Dimension | 1/2" TO 12 ", 6 inch |
| Media | Water, Gas, Air |
| End Connection | Flange End, Screwed End |
| Valve Type | Y & T Type |
| Model Name/Number | C I , S S , C S MATTE RAILS AVAILABLE |
| Usage/Application | Industrial |
Product Specification
| Material | CAST STEEL , C I, S S |
| Media | Air, Gas, Water |
| Usage/Application | Industrial |
| Size | 1 inch |
| End Connection | Flange End, Screwed End |
| Size/Dimension | 2 " TO 12 " |
| Color | SILVERA |
| Diameter | 1" |
| I Deal In | New Only |
| Brand | Racer |
| Minimum Order Quantity | 1 EACH |
C S Y' - Type Strainers
The Y Type strainers flanged ends & screwed ends that we manufacture are available with SS screen. These Y-type strainers are precisely designed for high performance and longer service life even after regular use in extreme high temperature and pressure. Our entire range is easy to install and also protects from foreign matter in the pipelines.
These are available in various specifications:
• The bolted cover is machined to securely receive the screen cover
• The gaskets are designed for service even in high temperatures
• Covers are furnished with blow-off tapping
• Blind covers are also available
The industrial Y strainers provided by us is precision engineered and are suitable for various industrial usages. Our strainers give good adaptability and flawless performance. Our Y type strainers are made with S.S. filter element of perforated sheet and wire mesh as per the customer’s specific demands. These filter elements are easily removable.
We offer precision engineered and durable range of Y-type strainers suitable for various industrial applications. These strainers are known for various qualitative features such as adaptability and flawless performance. Y-type strainers are with S.S. filter element of perforated sheet and wire mesh (as per customer's specification). The filter elements are easily removable.
Product Image
Yes! I am InterestedRequest A Callback
Spirax Thermo Dynamic Steam Trap
Product Price: Rs 1,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Valve Size | 2 inch |
| Model | TD -3 |
| Brand | SPIRAX |
| Size | 1/2 " ON WORDS |
| End Connection Type | screend |
| Color | SILVER |
| Application | stem |
| Material | C S |
Thermodynamic Steam Traps
Thermodynamic steam traps combine reliability, simplicity and efficiency of operation.
With just one moving part - a hardened stainless steel disc - they give a blast discharge with clean, tight shut-off.
Able to withstand superheat, water hammer, corrosive condensate, freezing and vibration.
The TD trap is the first choice for removal of condensate from steam distribution systems.
Thermo dynamic Steam Trap is the World's most versatile & reliable trap having compact design with Mirror-polished differentially hardened disc & seat for long life & tight seal to provide excellent resistance to waterhammer.
Strainers in Y or T type designs remove suspended grift from steam & condensate with no additional pressure drop so as to save a bundle in annual maintenance & wear & tear costs.
Ball Float Traps, specially designed for the continuous discharge of high volume condensate & the best choice for applications with automatic temperature control. Moisture Separators are simple & effective way to improve process by eleminating moisture from steam for better heat transfer.
nverted Bucket Traps are best suited for the continuous removal of condensate from high pressure heat exchangers.
Balanced Pressure Thermostatic Traps discharge condensate only after it has cooled below saturation temperature. They also act as trouble free air venting.
When pipeline pressure & control accuracy cannot be matched by direct acting valves, a low moving pilot relay can harness the pressure in the pipeline to achieve high closing force & close control.The DP17 E has an electric solenoid which allows for remote or automatic shut off of steam supply.
Additional Information:
- Item Code: 213
- Production Capacity: std
- Delivery Time: ex stock
- Packaging Details: std
Yes! I am InterestedRequest A Callback
Cast Iron Sluice Gate Valve KARTAR MAKE
Product Price: Rs 1,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Material | FLANGED END |
| Size | 4 inch |
| Usage/Application | Industrial |
| Valve Size | 2" TO 24 " |
| Brand | KARTAR MAKE |
| End Connection Type | Flanged |
| Automatic Grade | Semi-Automatic |
| Media | Water |
| Voltage | STD |
| Pressure | High Pressure |
| Temperature Of Media | High Temperature |
Cast Iron Sluice Gate Valve KARTAR MAKE
| Surface Finishing | Color Coated |
| Usage/Application | Water, Oil, Air, Fire fighting applications, Marine applications |
| Automation Grade | Manual |
| Brand | Kartar |
| Color | Blue |
| Material | Cast Iron |
With the valuable assistance of skilled team of professionals, we are engaged in offering an extensive range of high-quality Cast Iron Sluice Valve.
Features:
- Generally in non rising stem design
- Available in outside yoke type rising stem
- Flanged ends
- Handwheel, cap or gear operated
- Available in PN10 & PN16
- ISI Marked as per IS:14846
- Available in CL125 as per BS:5163
- Available in reselient seating as well as metal seating
Working & Test Pressure:
- Sluice Valve PN 1.0 Sluice Valve PN 1.0 Gate Valve CI 150
- Hydrostatic Test (Mpa) Body / Shell 1.5, 2.4, 3.0
- Hydrostatic Test (Mpa) Seat 1.0, 1.6, 2.2
- Pneumatic Test (Mpa) Seat NA, NA, 0.7
- 1 Bar = 0.1 Mpa = 1.019 Kg.cm2 = 14.50 PSI
Yes! I am InterestedRequest A Callback
KARTAR MAKE Wafer Type Butterfly Valve.
Product Price: Rs 1,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Valve Size | 1/2" TO 12 " |
| Type | gun metal gate valves |
| Material | Aluminium |
| End Connection Type | Flanged |
| Brand | KARTAR |
| Media | Air, Gas, Water |
| Accuration Type | yes |
| Connection Type | 1/2" to 24 " |
| Valve Type | Gate & butter fly valves |
| Operation Type | By Gear, By Actuator, By Lever |
| Temperature of Media | Medium Temperature, Low Temperature, High Temperature |
| Condition | New |
| Usage/Application | Industrial |
| Construction | Wafer Type |
| Automation Grade | Semi-Automatic |
| Power | Manual |
| Usage/Application | Industrial |
| Surface Finishing | Color Coated |
| Automation Grade | Manual |
| Brand | Kartar |
| Product Code | K-701 / K-702 |
| Material | Cast Iron |
Wafer Type Butterfly Valve.
Product Features:
- DN 50 to DN 600, PN 10 & PN 16
- Temperature Range 34°C to 150°C
- No part in contact with fluid except disc and liner
- Self lubricated bushes
- Neck flange according to ISO:5211
- Direct Actuator mountable design
- Design reference IS:13095 & BS:5155
- Neck height to accommodate insulation
- Lugs on body make them suitable for using at the end of line
- Suitable for actuator & gear mountings
- 100% leak tight design
- Available in lever type and clutch type handles
Paper & Pulp Industry, Waste & Effluent Treatment Plants, Water Treatment, Chemical & Sugar Industry, Fire Fighting, Drilling Rigs, Heating & Air Conditioning, Cooling Water Circulation, Compressed Air, Civil Constructions & numerous other.
Composition:
| S.No. | Components | Material |
|---|---|---|
| 1 | Body | Cast Iron, SG Iron (Ductile), Cast Carbon Steel, Stainless Steel, Bronze |
| 2 | Disc | SG Iron (Ductile), Stainless Steel |
| 3 | Liner | Nitrile, Neoprene, EPDM, Silicon, Buna N |
| 4 | Upper & Lower Stem | Stainless Steel AISI 410, AISI 304 |
| 5 | Bushing | Teflon or Nylon |
| 6 | O Rings | Nitrile |
| 7 | Circlips | Spring Steel |
Yes! I am InterestedRequest A Callback
Spirax Make Thermodynamic Stem Trap T D 3 Spriex Make ( Screwed)
Product Price: Rs 1,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Valve Size | 1 inch |
| Pressure | STD |
| Material | Stainless Steel |
| Size | 1/2" TO 3" |
| Brand | SPIREX |
| Color | BLACK |
| Available Design | Spirax Make Thermodynamic Stem Trap T D 3 Spriex Make ( Screwed) |
| Model Name/Number | TD-3 |
Product Specification
| Size | 15 mm (Inner Dia) Min. |
| Brand | Forbes Marshall |
| Material | Forged steel |
| Color | Grey |
| Max Operating Tempreture | 450 Degree C |
| Max Pressuer For Socket Weld End | 55.0 kg/cm2 TMO |
| Country of Origin | Made in India |
Description:
- Thermodynamic steam trap with inbuilt strainer and full stainless steel construction, best suited for header and mainline drains and drop legs.
Sizes And Pipe Connections:
- 15NBand20NB Screwed BSPT/NPT & Socket Wieldable ends
- Available with ASA - 150, 300 & 600 weld on flanges on request.
- Available with IBR certificate
- Limiting Conditions: Maximum operating conditions PMO -
- Max. operating pressure for screwed end 31.64 kg/cm' TMO
- Max. operating temperature 427°C.
- Hydraulic test pressure for screwed ends 63.0 kg/cm2 PMO
- Max. operating pressure for socket weld ends 44.0 kg/cm1
- Hydraulic test pressure for socket weld ends 88.0 kg/cm' PMOB
- Max. operating back pressure on outlet should not exceed 80% of inlet pressure.
- Minimum inlet pressure for satisfactory operation 0.25 kg/cm2 On special request TD-3 can be supplied for PMO
- Max operating pressure for socket-weld ends 55.0 kg/cm2 TMO
- Max. Operating temperature 450°C.
Maximum working temprature 425°c.
Specifivations & Features:
Mirror finished moving disc.
MATERIALS OF CONSTRUCTION
Additional Information:
- Item Code: 1086
- Production Capacity: STD
- Delivery Time: EX STOCK
- Packaging Details: STD
Yes! I am InterestedRequest A Callback
Stainless Steel Ball Valve-Flanges Ends CF-8 M
Product Price: Rs 1,000 / PieceGet Best Price
Product Brochure
Product Details:
| Material | Brass, Plastic, Stainless Steel |
| Valve Size | 1/2 |
| Pressure | Low Pressure,Medium Pressure,High Pressure,Vacuum |
| Media | Water, Air, Fuel, Powder/Solids, Gas |
| Temperature of Media | Medium Temperature, Normal Temperature, Low Temperature, High Temperature |
| Is It Branded | Branded |
| Branded | Branded |
| Condition | New |
| Threaded | Yes |
Stainless Steel Ball Valve-Flanged Ends CF-8 M
Three piece design, full port, flanged ends to ASA- 150 /BS:10 table 'F' with stainless steel (aisi-304/316) ball & stem, teflon seats & seals, blow out proof stem, stainless steel lever, suitable for air, gas, low steam, LPG, chemicals, water, petro-chemicals & process industries.
| Material | Stainless Steel |
| Number Of Holes | 4 |
| Usage/Application | Water |
| Material Grade | SS316 |
| End Connection Type | Flanged |
| Valve Size | 50mm |
| Pressure | 65 bar |
| Automation Grade | Semi-Automatic |
| Color | Silver |
| Surface Finish | Polished |
| Minimum Order Quantity | 10 |
Hydraulic Body Test Pressure : 30kg/cm2 (427psig)
Hydraulic Seat Test Pressure : 30 kg /cm2 (427 psig)
Seat Tested on Air -Pressure : 6. 9 kg. / cm2 (98 psig)
Part No.Name of partsMaterial1LeverS. S2StemS. S3NutS. S4GlandS. S5Packing ring
Teflon6Stem packing
Teflon7Ball Seals
Teflon8BallS. S9BodyS.
Yes! I am InterestedRequest A Callback
Air Relief Valve C I Water Purpose
Product Price: Rs 1,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Valve Size | up to 3.0 inch |
| Size | 1 inch |
| Structure | C I BODY |
| Design | STD |
| Model Name/Number | AS PER SIZE MODEL NUMBER |
| Material | Cast Iron, Stainless Steel |
| Media | Gas, Water, Air |
| Pressure | High Pressure, Medium Pressure, Low Pressure |
| Working Temperature | STD |
| Operating Pressure | STD |
| End Connection | SCREWEND & FLANGEND |
| Color | STD |
| End Connection Type | STD |
| Power | STD |
| Operating Temperature | STD |
| Packaging Type | STD |
| Weight | STD |
| Material Grade | C I |
| Surface Finish | STD |
| Rust Resistance | Yes |
| Frequency | STD |
| Flange Thickness | STD |
| Product Type | STD |
| Rotary Type | Yes |
| Flange Diameter | STD |
| Quantity Per Pack | STD |
| Technique | STD |
| Temperature | STD |
| Voltage | STD |
| Usage/Application | WATER |
| Corrosion Resistance | Yes |
| I Deal In | New Only |
| Condition | New |
| Country of Origin | Made in India |
Product Specification
| Size | 1/2" TO 6" |
| Material | Stainless Steel, Cast Iron |
| Media | Water, Gas, Air |
| Pressure | Low Pressure, Medium Pressure, High Pressure |
| Condition | New |
Product Image
Yes! I am InterestedRequest A Callback
LEADER Forged Steel Gate Valves
Product Price: Rs 1,000 / PieceGet Best Price
Product Brochure
Product Details:
| Valve Size | 50 mm |
| Brand | L & T , AUDCO, SANT,W J NEETA, QINN , OTHER MAKE ALSO |
| Material | FORGED STEEL |
| Size | 1/2" to 12 " |
| End Connection | SOCKET WELD , SCREWED |
| Media | Gas, Oil, Water |
| Automation Grade | Semi-Automatic |
| Condition | New |
FCS002 Forged Steel Gate Valve (Socket Weld / Screwed)
- Item Code: FCS002
- Bore Type: Reduced Bore
- Pressure Rating: CL-800
- Testing Standard: API-598, BSEN 12266 Part-1
- Size Range: 15mm to 50mm
- Product Standard: API 602
| P. No. | NAME OF PART | CARBON STEEL | ALLOY STEEL | STAINLESS STEEL | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | BODY | A105 | A350 LF2 | A182 F5 | A182 F11 | A182 F22 | A182 F9 | A182 F304 | A182 F316 | A182 F304L | A182 F316L |
| 2 | SEAT RING | ASTM A276 TYPE 410 | SS 304 | SS 410 | SS 410 | SS 410 | SS 410 | SS 304 | SS 316 | SS 304L | SS 316L |
| 3 | WEDGE | ASTM A217 Gr. CA15/ ASTIM 276 TYPE 410 |
SS 304 | CA15/ SS410 |
CA15/ SS410 |
CA15/ SS410 |
CA15/ SS410 |
SS 304 | SS 316 | SS 304L | SS 316L |
| 4 | GASKET | SPIRAL WOUND STAINLESS STEEL GRAPHOIL FILLER | |||||||||
| 5 | BONNET | A105 | A350 LF2 | A182 F5 | A182 F11 | A182 F22 | A182 F9 | A182 F304 | A182 F316 | A182 F304L | A182 F316L |
| 6 | STUDS | A193 B7 | A320 L7 | A193 B7 | A193 B7 | A193 B16 | A193 B16 | A193 B8 | A193 B8 | A193 B8 | A193 B8 |
| 7 | PACKING | FLEXIBLE GRAPHITE | |||||||||
| 8 | GLAND | A182 F6a | SS 304 | A182 F6a | A182 F6a | A182 F6a | A182 F6a | SS 304 | SS 316 | SS 304L | SS 316L |
| 9 | GLAND FLANGE | A105 | A350 LF2 | A182 F5 | A182 F11 | A182 F22 | A182 F9 | A182 F304 | A182 F316 | A182 F304L | A182 F316L |
| 10 | NUTS | A194 2H | A194 Gr.4 | A194 2H | A194 Gr.4 | A194 Gr.4 | A194 Gr.4 | A194 Gr.8 | A194 Gr.8 | A194 Gr.8 | A194 Gr.8 |
| 11 | STEM | ASTM A276 TYPE 410 | SS 304 | SS 410 | SS 410 | SS 410 | SS 410 | SS 304 | SS 316 | SS 304L | SS 316L |
| 12 | YOKE SLEEVE | ASTM A582 TYPE 416 | |||||||||
| 13 | HAND WHEEL | DI.A536 Gr. 80-55-06 | |||||||||
| 14 | NAME PLATE | ALUMINIUM / STEEL | |||||||||
| 15 | HAND WHEEL RETAINING NUT | STEEL | |||||||||
Yes! I am InterestedRequest A Callback
Air Release Valve Forged Brass Zoloto Make ( Screwed) Art No-1095
Product Price: Rs 1,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Valve Size | 1/2" , 3/4" 1" |
| Media | Solar |
| Size | 1/2" ,to 1" |
| Pressure | High Pressure |
| Usage/Application | Air |
| Brand | Zoloto |
| Model Name/Number | Art 1095 |
| Material | Brass froged |
Zoloto Make Forged Brass Air Release Valve (Screwed) Art No-1095
Forged Brass Air Release Valve (Screwed)
Article Code
1095Salient Features- Screwed male end as per IS 554 / BS 21 / ISO 7.
- Chrome plated forged brass body and cover.
- Full bore.
- Sleek in design, ease of installation.
- Handy device used to release entrapped air in any piping system.
- Smooth inner valves reduce pressure loss.
- Maintains system flow efficiency.
- Brilliant aesthetic look.
- Ergonomic design.
Test Pressure (Hydrostatic) :
Shell : 15 bar (220 psig)
Seat : 10 bar(150 psig)
Maximum Working Temperature : 110°C
| Suitable For |
|---|
|
Steam |
|
Water |
|
Oil |
|
Air |
|
Gases |
| P.No. | Name of Part | Material of Construction | Specification | Qty. |
|---|---|---|---|---|
| 1 | Body | Forged Brass (Chrome Plated) | IS 6912 Gr. FLB | 1 |
| 2 | Float | Polypropylene | – – – | 1 |
| 3 | Lock | Polypropylene | – – – | 1 |
| 4 | Hing | Polypropylene | – – – | 1 |
| 5 | Seat | Forged Brass | IS 6912 Gr. FLB | 1 |
| 6 | Chamber | Forged Brass | IS 6912 Gr. FLB | 1 |
| 7 | Ring | Nitrile Rubber | IS 5192 – 1 | 1 |
| 8 | Valve | Brass | IS 319 Gr. 2 | 1 |
| 9 | Cover | Forged Brass (Chrome Plated) | IS 6912 Gr. FLB | 1 |
| 10 | Ring | Nitrile Rubber | IS 5192 – 1 | 1 |
| 11 | Spring | Stainless Steel | Type 304 | 1 |
| 12 | Bracket | Polypropylene | – – – | 1 |
| 13 | ‘O’ Ring | Nitrile Rubber | IS 5192 – 1 | 1 |
| 14 | Strainer | Plastic | – – – | 1 |
Yes! I am InterestedRequest A Callback
Carbon Steel Flanged Ball Valves
Product Price: Rs 1,000 / PieceGet Best Price
Product Brochure
Product Details:
| Valve Size | More than 12 inch |
| Material | Carbon Steel |
| Media | Air, Water, Gas |
| Pressure | High Pressure |
| Operation Mode | Semi-Automatic |
| Usage/Application | Water and Gas Industry |
| Pressure | 1.8 Mpa |
| Connector Type | Flanged End |
| Material | Carbon Steel |
| Size | 50 mm |
| Brand | Revolve |
| Temperature Of Media | 180 Degree Celsius |
| Surface Finish | Polished |
| Country of Origin | Made in India |
Yes! I am InterestedRequest A Callback
Cast Carbon Steel Gate Valve
Product Price: Rs 10,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Valve Size | 80 mm |
| Size | 3 inch |
| Material | Cast Carbon Steel Gate Valve |
| Application | STEAM CHEMAICAL WATER |
| Brand | L T ZOLOTO HAMMER, ATAM, SANT, W J , SEALMECH |
| Model Name/Number | H |
| Media | Air, Water, Gas |
| Temperature of Media | Medium Temperature, High Temperature, Low Temperature |
C S Gate Valve
Product Specification
| Size | 2" TO 14" |
| Model | GATE VALVE CL 150 |
| Brand | SANT/ L&T,/WJ |
| Type | Gate Valve Flange |
| Application | Industrial Usage, Water Industrial Usage |
| Minimum Order Quantity | 1 Piece |
Yes! I am InterestedRequest A Callback
KARTAR Cast Iron Sluice Valve
Product Price: Rs 1,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Valve Size | 6 inches |
| End Connection Type | Flange |
| Size | 2" TO 30" |
| Brand | KARATAR MAKE |
| Pressure | ,Medium Pressure,High Pressure |
| Media | Water,Gas,Air |
| Body Style | C I GATE VALVES |
| Condition | New |
| Usage/Application | Water |
| Material | Cast Iron |
| Usage/Application | Water, Oil, Air, Fire fighting applications, Marine applications |
| Automation Grade | Manual |
| Surface Finishing | Color Coated |
| Color | Blue |
| Brand | Kartar |
With the valuable assistance of skilled team of professionals, we are engaged in offering an extensive range of high-quality Cast Iron Sluice Valve.
Features:
- Generally in non rising stem design
- Available in outside yoke type rising stem
- Flanged ends
- Handwheel, cap or gear operated
- Available in PN10 & PN16
- ISI Marked as per IS:14846
- Available in CL125 as per BS:5163
- Available in reselient seating as well as metal seating
Working & Test Pressure:
- Sluice Valve PN 1.0 Sluice Valve PN 1.0 Gate Valve CI 150
- Hydrostatic Test (Mpa) Body / Shell 1.5, 2.4, 3.0
- Hydrostatic Test (Mpa) Seat 1.0, 1.6, 2.2
- Pneumatic Test (Mpa) Seat NA, NA, 0.7
- 1 Bar = 0.1 Mpa = 1.019 Kg.cm2 = 14.50 PSI
Additional Information:
- Packaging Details: Brass Threaded Inserts We are one of the largest manufacturers of brass threaded inserts used for plastic moulding. Material: Generally Free Machine Grade of CuZn37Pb3 equivalent to BS 2874 is used to manufacture various brass threaded inserts in form of round, Hexagon, Square etc. Other grades which are followed as per custom requirements are CZ 121 , CZ 131 , C3604, CDA 360, and DTD 627. etc. Key Features: ??? Thread Size Starts from M1.6 to M50. BA, BSW, BSP, BSPT, BSF & American Threads like UNC, UNF, UNEF, and NPT are also available as per custom requirements. ??? Straight, Diamond, opposite diagonal, Knife thread etc. are the knurling options available to give solid gripping to Molding applications. ??? Inserts available as per Class 2B ANSI/ASME B1.1 & Confirms to ISO metric 6H Thread Standards. ??? Inserts with collar series provides Options to use Flange to make Electric Contact ??? Ultrasonic series with Opposing Diagonal Knurls provide excellent Torque Resistance Vertical Undercuts in Tri Series Provides Superior Tensile Strength ??? Blind thread or closed bottom Inserts prevents plastic from entering the bottom of the insert. Finish: Generally Brass Inserts comes with the Natural, Nickel & Tin Finish. But Surface Finishes such as Chromium, Silver, Gold, etc. can be done as per customer???s requirement.
Yes! I am InterestedRequest A Callback
Kartar Make Butterfly Valve
Product Price: Rs 1,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Valve Size | 4.0 inch |
| Size | 2" TO 24 " |
| Material | Cast Iron |
| Automation Grade | Manual |
| Color | Silver |
| Brand | KARTAR MAKE |
| End Connection Type | Flanged |
| Media | Water |
| Material | Iron |
| Brand | Generic |
| Exterior Finish | Iron |
| Inlet Connection Size | 2 Inches |
| Inlet Connection Type | Flange |
| Outlet Connection Type | Flange |
| Maximum Operating Pressure | 1E+1 Bars |
| Outlet Connection Size | 2 Inches |
| Specification Met | PN10 |
| Valve Type | Butterfly Valve |
- Optimal Size: This Kartar Butterfly Valve comes in a 50mm (2 inch) diameter, offering a versatile solution for various water line setups, providing efficient flow control while ensuring compatibility with standard pipe sizes.
- High-Quality Construction: Crafted from robust cast iron, this valve guarantees longevity, corrosion resistance, and the ability to withstand the rigors of continuous water flow, making it a durable choice for long-term usage.
- Precision Engineering: The valve's design incorporates precision-engineered components that ensure smooth and reliable operation, minimizing friction and pressure drop for efficient water flow management.
- PN10 Rating: Kartar's butterfly valve is PN10 rated, showcasing its capability to handle pressures of up to 10 bar (145 psi), ensuring safe and reliable performance in various water line applications.
- Easy Operation: Equipped with a user-friendly lever handle, the valve allows for effortless manual operation, granting you full control over water flow adjustments and shut-off.
- Versatile Applications: Suitable for a wide array of water lines, including industrial, commercial, and residential setups, this butterfly valve proves its adaptability and reliability across different environments.
Additional Information:
- Production Capacity: STD
- Delivery Time: EX STOCK
Yes! I am InterestedRequest A Callback
KARTAR MAKE Cast Iron Non Return Valve.
Product Price: Rs 1,000 / PieceGet Best Price
Product Brochure
Product Details:
| Valve Size | 6 inch |
| Material | Cast Iron |
| Usage/Application | WATER |
| Connection Type | Flanged |
| Corrosion Resistance | Yes |
| Finishing | Color Coated |
| Color | Black |
| Body Material | Cast Iron |
| Usage/Application | Water,Oil |
| Brand | Kartar |
We are among the reputed organizations, deeply engaged in offering an optimum quality range of Cast Iron Non Return Valve.
Features:
- Self operative swing type design
- Flanged ends
- Designed to allow maximum flow of water
- Available in PN10 & PN16
- ISI Marked as per IS:5312
- Bye pass arrangement can be provided
Working & Test pressure:
- Type of Valve – PN 0.6, PN 1.0, PN 1.6
- Hydrostatic Test (Mpa)
- Body – 0.9, 1.5, 2.4
- Shell – 0.6, 1.0, 1.6
- Note : The valves can also be made in PN 1.6 & 1.0 on request
- K-514 In PN 10 pressure and with Rubber Seating.
- K-515 In PN 10 pressure and with GM Seating.
- K-516 In PN 16 pressure and with Rubber Seating.
- K-517 In PN 16 pressure and with GM Seating
Composition:
| S.No. | Components | Material |
|---|---|---|
| 1 | Body, Cover, Hinge, Door, Door Face Disc | Cast Iron, SG Iron |
| 2 | Hinge Pin | High Tensile Brass, Stainless Steel |
| 3 | Body Face Ring | Leaded Tin Bronze (Gun Metal), S.S. |
| 4 | Door face | Leaded Tin Bronze, Natural Rubber |
| 5 | Boltings | Carbon Steel |
| 6 | Gaskets | Rubber, CAF. |
Dimensions:
| Size (mm) | A Length over Flanges | Size of Bye Pass Valve | PN Std. Pressure Rating |
|---|---|---|---|
| 50 | 200 | 10 | 1.6 |
| 65 | 240 | 10 | 1.6 |
| 80 | 260 | 10 | 1.6 |
| 100 | 300 | 10 | 1.6 |
| 125 | 350 | 15 | 1.6 |
| 150 | 400 | 15 | 1 |
| 200 | 500 | 25 | 1 |
| 250 | 600 | 25 | 1 |
| 300 | 700 | 40 | 1 |
| 350 | 800 | 40 | 0.6 |
| 400 | 900 | 40 | 0.6 |
| 450 | 1000 | 50 | 0.6 |
Yes! I am InterestedRequest A Callback
Cast Iron T Type & Y TYPE Strainer
Product Price: Rs 10,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Material | C I,C S,GUM METAL,BRASS |
| Valve Type | 3 " to 24 " |
| Shape | t type |
| Automation Grade | Manual |
| Media | Water,Gas,Oil |
Cast Iron/Steel "T" Type strainer
is offered in varied sizes ranging from 25OMM To 350MM. It is designed using high grade material and machinery that are procured from the well established vendors of the market. The strainer is acclaimed by the clients due to the high tensile strength, dimensional accuracy and longer functional life.
Specification
- Model: NVIL 26
- M.O.C: CI/WCB/CFB/CFBM
- Screen: S.Swith 40 Mosh
- End: Flanged End
- Rating: PN 10/ PN/16/ 150#
Yes! I am InterestedRequest A Callback
Strainer Y Type ( Investment Casting )
Product Price: Rs 1,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Material | C I,S S,C S F S |
| Size(inch) | 4 inch |
| Media | Air, Gas, Water |
| Usage/Application | Pharmaceutical / Chemical Industry |
| Valve Type | Y TYPE STRAINER |
| End Connection | Screwed End, Flange End |
| Automation Grade | Manual |
is widely appreciated for durable and quality features. It is manufactured using high grade material and is in accordance with the international standards and norms. We pack strainer in high grade material for timely delivery across the country.
Technical Specification:
- Model: NVIL 23
- M.O.C: WCB/CF8/CF8M
- Screen: S.S with 30 mesh
- End: Scr./ Flanged End
- Rating: #150
- Size: 15MM TO 50MM
Yes! I am InterestedRequest A Callback
SS Three Way Ball Valve
Product Price: Rs 2,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Valve Size | 2 Inch |
| Size | 1/2" TO 6" |
| End Connection Type | Screwed |
| Automation Grade | Semi Automatic |
| Material | Stainless Steel |
| Branded (Y/N) | Yes |
| Threaded | Yes |
| Is It Branded | Branded |
| Branded | Branded |
| Condition | New |
S S THREE WAY BALL VALVE
The Investment Casting Three Way Ball Valve is designed by our experienced experts as per the industry norms. It is offered in varied sizes and specifications as per the clients' requirements. Our quality controllers check the performance and quality before offering at the market leading price.
Technical Specification:
- Model: NVIL 7
- M.O.C: M.S./CF8/CF8M
- Design: Scr. end
- Rating: #150
- Size: 15MM TO 50MM
Yes! I am InterestedRequest A Callback
Cast Steel W C B Gate Valve
Product Price: Rs 1,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Valve Size | 6 inch |
| Media | Air, Gas, Water, Powder/Solids, Fuel |
| Pressure | High Pressure, Medium Pressure, Low Pressure |
| Temperature of Media | Normal Temperature, Medium Temperature, High Temperature, Low Temperature |
| Material | CAST STEEL |
| Power | Manual |
| Condition | New |
Product Specification
| Size | 1/2" To 24" |
| Model | GT 071 |
| Usage | Industrial area |
| Price Range | Rs 800-2 lakh/ piece |
| Material | Alloy Steel |
| Valve Size | 8mm-700mm |
| Minimum Order Quantity | 20 Piece |
Being a quality oriented organization, we are involved in providing a supreme quality range of Cast Steel /Forged Steel Gate Valve.
MATERIAL: WCB,WC6,WC9, A105,F11,F22
PRESURE RATING- 150#,300#,600#,800#,900#,1500#,2500#
Product Image
Yes! I am InterestedRequest A Callback
Balancing Valve - Flanged - Advance Make
Product Price: Rs 1,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Size | 1/2 inch |
| Material | C I BRASS |
| Model Name/Number | AS PER SIZE MODEL NO- |
| Connections | SCREWED & FANGED |
| Corrosion Resistance | H |
| Media | WATER,STEM,OTHER PURPOSE |
| Brand | Advass & Honevel |
Balancing Valve Flanged Advance make
The salient features include :-
Precise double regulation
Tamper-proof setting, with handwheel or lockshield
Low flow-noise emission
With or without Drain Cocks
With or without Pressure Test Cocks
Positive shut-off
Exceeds IS 778 - 1984
Can eliminate separate Flow Measuring Device.
Flanged in Cast iron for PN16, Ductile Iron for PN20
Size from 3" upto 12"
EPDM for Cast iron Construction.
Economy in installation & Operation
Application
Control And Shut – Up Flanged Valves.
As double regulating, balancing and shut-off valve in open or closed hydronic heating/cooling system and cooling water system in process industry for balanced flow. With special alloys, these valves can be used in Process Plants too for double regulation & flow measurement functions for balanced flow.
Installation Dimensions
National SizeDN mm (inch)080 (3")100 (4")125 (5")150 (6")200 (8")250 (10")300 (12")Amm310350400480600730850Flange ODmm200220250285340405460Bmm290410450490590760820Φ Cmm170222222290385538538Strokemm32404957698096Handwheel Turns810121413.51214.5WeightKg.27426084165377460
Why Balancing Valves | Design Features | Flow Characteristics | Application | Installation Dimensions | Enquiry
Yes! I am InterestedRequest A Callback
Cast Iron Butterfly Valve Wafer Type
Product Price: Rs 1,000 / PieceGet Best Price
Product Details:
| Valve Size | 100 mm |
| Power | Hydraullic |
| Operator | Lever, Electric Actuator |
| Media | Water |
| Automation Grade | Semi-Automatic |
| Operation Type | By Lever, By Gear, By Actuator |
| Temperature of Media | Low Temperature, High Temperature, Medium Temperature |
| Is It Customized | Customized |
| Condition | New |
Cast Iron Butterfly Valve Wafer Type
(electical Actuator Operated)
Product Details- Tight Shut Off Type, Integrally Moulded, Rubber Liner, Lugs Provided,compatible With Flanges To Bs-10 Tables - D & E,bs4504,section-3.1 Pn10 & Pn16 &ansi - Class 125 & 150
End Details- Wafer Short Ends With Integrally Moulded Rubber Gasket
Testing - Hydraulic.
Body Tested- 21bar
Seat Tested- 16bar
Yes! I am InterestedRequest A Callback
Cast Steel Gate Valve Class-150 (Flanged)
Product Price: Rs 1,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Valve Size | 4 inch |
| Material | Cast Steel |
| Brand | HAMMER, ZOLOTO, SELMACE,LEADER, W J NEETA |
| Size | 2 " TO 18 " |
| Pressure | AS PER STANDER |
| Temperature | AS PER STANDER |
| Usage/Application | WATER , AIR, CHEMICAL, OILE |
| Design Standard | STANDER & AS PER YOUR DRWAINGS |
Cast Steel Gate Valve Class-150 (Flanged)
Specifivations & Features:
Design stabdard BS 1414 / AP 600
Bolted Bonnet , Outside screw, yoke type , Rising stem..
Renewable 13% cr.stainless steel (AISI 410) working parts .
Handwheel operated.
MATERIALS OF CONSTRUCTION
SIZE / DIMENSIONS:
Suitable For:
Additional Information:
- Item Code: 1077
Yes! I am InterestedRequest A Callback
Cast Iron Strainers Flanges
Product Price: Rs 999 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Capacity | Y TYPE OR T TYPE AVILABLE, 4 inch |
| Model | SCREWED END & FLANDEND |
| Size | 3 inch |
| End Connection | Flange End,Screwed End |
| Size/Dimension | 1/2 |
| Brand | AARKO,HAMMER,ROYAL ASHWIN,NISA MAKE |
| Media | Air,Gas,Water |
is designed using high grade material to ensure tensile strength and durability. It is monitored by our quality controllers stringently to ensure performance before offering to the clients. The strainer is widely demanded by various industries due to the exceptional properties and quality.
Technical Specification:
- Model: NVIL 24
- M.O.C: CI/WCB/CF8/CF8M
- Screen: S. Swith 40 Mesh
- End: SCR/Flanged end
- Rating: PN 10/ PN/16/ 150#
- Size: 15MM To 350MM
Yes! I am InterestedRequest A Callback
Aluminium Butterfly Valve'
Product Price: Rs 2,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Valve Size | 50 MM TO 300 MM |
| Port Size | 50 mm to 150 mm |
| Pressure | High Pressure |
| Usage/Application | Water |
| Power | Manual |
| Brand | KITZ MAKE |
| Construction | Aluminium with S S Disc |
| Media | Gas, Air, Water |
| Temperature of Media | Medium Temperature, Low Temperature, High Temperature |
| End Connection | 50 mm to 150 mm |
| Operator | Lever |
| Material | Aluminium |
SIZE 50 MM TO 150 MM
Aluminium Die cast Butterfly ValveTECHNICAL SPECIFICATION
|
Size: |
1-1/2" to 12” Aluminum Die |
| Cast Body: | 2” to 24” Ductile Iron Body |
| Pressure Rating: | PN10, PN16 , JIS 10K, |
| Application: | Suitable for all water application, Like HVAC, Plumbing , Fire Fighting, Water Treatment Plant, |
| Aluminum Butterfly Valve: | |
| Size Range: | 1-1/2" to 8" |
| Body Material: | Die-Casting Aluminum |
| Disc Material: | SS 316 |
| Stem Material: | Stainless Steel |
| Seat: | EPDM or NBR |
| Coating: | Epoxy |
| Gearbox, Lever Motorized, Pneumatic: | 150 PSI to 250 PSI |
| Design: | API609; AWWA C504 |
| Face-to-Face Dimension: | API 609 A |
| Flange Connection: | ASME B16.1, ASME B16.42, ASME B16.5, ASME B16.47A |
| Head Flange: | ISO 5211 |
| Testing: | API 598 |
Yes! I am InterestedRequest A Callback
Cast Iron Normex Butterfly Valve
Product Price: Rs 1,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Material | Cast Iron |
| Power | Manual |
| Media | Water |
| Temperature Of Media | High Temperature |
| Accuration Type | STD |
| Connection Type | STD |
| Handle Material | CAT IRON |
| Operation Type | By Gear, By Lever, By Actuator |
| Valve Type | LEAVER TYPE |
| Ansi Class/Rating | STD |
| Seat Type | STD |
| Thread Type | STD |
| Weight | STD |
| Warranty | ONE YEAR |
| I Deal In | New Only |
| Country of Origin | Made in India |
Product Specification
| Brand | Normex |
| Usage/Application | Water |
| Media | Water |
| Valve Size | 40mm to 400mm |
| Pressure | PN 1.0 & PN 1.6 |
| Material | Cast Iron |
| Power | Manual |
| Minimum Order Quantity | 5 |
Features:
- Wafer type butterfly valve available in PN10 rating. Mfg Std as per BS 5155 / IS 13095
- Available in Cast Iron, Cast Steel, Stainless Steel and Al Bronze
- Seating options available like Nitrile, NBR, EPDM, VITON & PTFE. Metal to Metal seating also available
| The control application in pumping systems attracted Normex to come out with control Valves i.e. Butterfly Valves. The Normex Butterfly Valve superseded the Gate Valve, Ball Valve and Globe Valve in most spheres of applications. Gas tight sealing with excellent control characteristics and uni directional flow has qualified Normex Valves by most of the industries. The centrally mounted disc, shafts and bearings has minimised head loss. It’s low weight and compact design has achieved acceptability in industries like Chemical and Petrochemicals, Watertreatment, Agriculture and many • Excellent flow control in quarter turn operation |
| Salient Features |
|
| Application |
| 1. Water treatment plants 2. Water distribution systems 3. Power Stations 4. Chemical / Petrochemical Industries 5. Steel Mills 6. Sugar Factories / Breweries 7. Sewage Plants 8. Process Industries 9. Seawater and Brine Pumping 10. Food Processing Industries 11. Mining Industries |
Yes! I am InterestedRequest A Callback
Wafer Type Non Returning Valve
Product Price: Rs 1,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Valve Size | 3 inch |
| Material Grade | S S 304 & 316 |
| Size | 1/2" to 12 " |
| Model Name/Number | C I , I C , S S Wafer Type Non Return Valves |
| Construction | C I & S S, I C |
| Media | Gas, Air, Water |
| Certification | EIL, IBR, CE |
| Material | SS |
| Condition | New |
Wafer Type Check Valves:
0
Brand: Castle Valves
Product Code: PN-16
Availability: In Stock
Description:
Wafer Type Check Valves:
Body & Flap: SG Iron:400/12 Seat: Nitrile
Temperature: 80 degree C W.P: 16kg/sq.cm
Additional Information:
- Production Capacity: STD
- Delivery Time: EX STOCK
- Packaging Details: STD
Yes! I am InterestedRequest A Callback
Techno make Brass & S S Ball Valve& Strainers
Product Price: Rs 1,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Valve Size | 1/2 to 6" |
| Connector Type | Screwed |
| Brand | TECHNO MAKE |
| Material Grade | S S,& BRASS |
| Steel Grade | BRASS, S S |
| Size | 1/2" to 6" |
| Pressure | STD |
| Media | Air, Water, Powder/Solids, Gas, Fuel |
| Automation Grade | Manual |
| Material | Stainless Steel, Plastic, Brass |
| End Connection Type | Screwed |
Techno make Brass & S S Ball Valve& Strainers
Brass & S S Ball Valve& Strainers
| Brand | TECHNO MAKE |
| Material Grade | S S,& BRASS |
| Material | Brass, Stainless Steel, Plastic |
| Size | 1/2" to 6" |
| Valve Size | 1/2 to 6" |
| Media | Air, Water, Gas, Fuel, Powder/Solids |
| Automation Grade | Manual |
Techno make Brass & S S Ball Valve& Strainers
Yes! I am InterestedRequest A Callback
Aluminum Butterfly Valves
Product Price: Rs 1,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Port Size | 1" to 24" |
| Valve Size | 3 inch |
| Automation Grade | Semi Automatic |
| Power | Manual |
| Material | Aluminium |
| Brand | Kitz |
| Pressure | Std |
| End Connection | Leaver type & Gear type |
| Operator | Lever |
| Material | Aluminium |
| End Connection | Wafer to suit ANSI B 16.5 (150#) |
| Pressure | Valve rating seat 8 to 10 kg |
| Power | Manual |
| Operator | Lever, Electric Actuator, Gear operated |
| Valve Size | 40NB to 200NB |
| Media | Water, Fuel, Powder/Solids |
| Color | Silver |
| Temperature of Media | Low Temperature, Medium Temperature, Normal Temperature |
| Model Number | CKT - 40 |
| Temperature (degree Celsius) | 150 Degreec |
| Operation Type | By Lever, By Gear, By Motor, By Actuator |
| Valve Type | Ckt |
| Seat Type | EPDM |
| Disc | SS 316 ( CF8M) |
| F to F Standard | +3mm |
| Size | 40NB to 200NB |
| Seat Leakage | Bubble tight shut off |
| Valve Body | Aluminum |
| Is It Customized | Customized |
| Condition | New |
REGENT make Butterfly Valve Aluminum Body with Extended Stem for Installation and automation for various piping designs and installation environment.Features:Wide range of service applications : Stainless steel discs and EPDM rubber seats can handle many different kinds of line fluid without concern of corrosion.Rust prevention : Rust Parts exposed are Rust Proof SS 304 Grade, body coated with epoxy all coating.Torque Sabilizer : A unique feature involving Stem bearing around the top and bottom stem to prevent stem galling and reduce torque for smooth …Product SpecificationDisc: ASTM A351 Gr. CF8MBody Material: Aluminium Die-CastNeck Material: Stainless Steel-316Hand Lever: Aluminium Die-CastSize Range: 40mm - 200mmBearing: Polyphenylenesulfide
Product Specification
| Size | 14mm to 200mm |
| Brand | ACI |
| Material | Aluminium Die Cast |
| Power | Manual/Automatic/Pneumatic/Solenoid/Hydraulic/Electric Operate |
| Operator | Pneumaumatic/Lever/Electric Operate |
| Media | Air, Water, Gas |
| Minimum Order Quantity | 50 Unit |
Yes! I am InterestedRequest A Callback
Kartar Single Plate Check Valve K710
Product Price: Rs 100 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Material Grade | C I , C S |
| Size | 1/2 " TO 12 " |
| Material | Cast Iron, Stainless Steel |
| Media | Powder/Solids, Fuel, Air, Water, Gas |
| End Connection | Screwed |
| Certification | EIL, CE |
| Power | Hydraulic,Manual |
| Power Source | Hydraulic, Pneumatic, Manual |
| Condition | New |
| Country of Origin | Made in India |
Get Latest Price
| Material | Cast Iron |
| Shape | Round |
| Finishing | Color Coated |
| Product Code | K-710 |
| Usage/Application | Water,Oil |
| Brand | Kartar |
| Color | Blue |
We are a unique entity in the industry, actively committed to offering an optimum quality range of Wafer Check Valve.
Other Details:
- Permits flow in one direction and closes automatically if the flow reverses
- Strictly conforming to International Standards
- Available in integrally moulded rubber seating
- Wafer type sleek design to allow maximum flow
- Epoxy coating imparts finish and resistance
- B is as per the drilling specifications
Test Pressure (Hydraulic) :
- Body : 2.4 MPa
- Seat : 1.6 MPa
- 1 Bar = 0.1 MPa = 1.019 Kg/cm² = 14.50 PSI
Composition:
| S.No. | Components | Material |
|---|---|---|
| 1 | Body | Cast Iron, Ductile Iron, Cast Steel |
| 2 | Disc | Carbon Steel, Stainless Steel |
| 3 | Seat & Gaskets | Nitrile, EPDM, Buna N |
Dimensions:
| Size (Inches) | Size (mm) | A | B | C |
|---|---|---|---|---|
| 1.1/2 | 40 | 19 | * | 26 |
| 2 | 50 | 19 | 35 | |
| 2.1/2 | 65 | 19 | 46 | |
| 3 | 80 | 19 | 57 | |
| 4 | 100 | 19 | 80 | |
| 5 | 125 | 19 | 102 | |
| 6 | 150 | 19 | 125 | |
| 8 | 200 | 29 | 166 |
Additional Information:
- Item Code: K-710
- Production Capacity: STD
- Delivery Time: EX STOCK
- Packaging Details: STD
Yes! I am InterestedRequest A Callback
Cast Iron Butterfly Valve Wafer Type (gear Operated)
Product Price: Rs 1,000 / PieceGet Best Price
Product Brochure
Product Details:
| Power | Hydraullic |
| Material | Cast Iron |
| Operator | Electric Actuator, Lever |
| Media | Air, Gas, Fuel, Water |
| Automation Grade | Automatic |
| Operation Type | By Gear, By Lever, By Motor, By Actuator |
| Temperature of Media | Low Temperature, High Temperature, Normal Temperature, Medium Temperature |
| Pressure | Low Pressure,Medium Pressure,High Pressure |
| Valve Size | 2 " TO 12 " |
(Gear Operated)
Product Specification
| Size | 2" to 24" |
| Valve Port Size | 2.0 inch |
| Power | Manual Gearbox |
| Model Name/Number | GBFV |
| Material | Cast Iron |
| Media | Water |
| Operator | Manual Gearbox |
| End Connection | Wafer Type |
| Pressure | 20 bar |
| Temperature Of Media | Medium Temperature |
| Operation Type | By Gear |
| Minimum Order Quantity | 10 |
With our years of experience & in-depth knowledge in this field, we are engaged in offering a quality-assured array of Gear Operated Butterfly Valve.
Various Features:
- Robust Construction
- Low maintenance
- Sturdy design
- High performance
Additional Information
| Delivery Time | 1 Week |
| Production Capacity | 500 |
| Packaging Details | Bag / Box as per client needs |
Q-79/80 Gear Box
Product Details:-tight Shut Off Type, Integrally Moulded, Rubber Liner, Lugs Provided,compatible With Flanges To Bs-10 Tables - D & E,bs:4504,section-3.1 Pn10 & Pn16 & Ansi - Class 125 & 150
End Details:-wafer Short Ends With Integrally
Moulded Rubber Gasket
Pressure Rating:- Pn-16 (hydraulic ) Up To Max. Temp.80° C
Testing :- Hydraulic.
Body Tested:- 21bar
Seat Tested:- 16bar
|
|
|
|||||||||||||||||||||||
Additional Information:
- Packaging Details: MATERIALS OF CONSTRUCTION PART NO. PART'S NAME MATERIALS SPECIFICATIONS 1 GEAR UNIT ----- STANDARD GEAR 2 HANDLE CARBON STEEL FABRICATED 3 BOLTS CARBON STEEL ---------- 4 BODY CAST IRON BS: 1452 Gr220 5 BOLTING CARBON STEEL BS: 916 6 SEATING LINER RUBBER NITRILE 7 WEDGE SGI/SS BS:2789/AISI-304,CF-8 8 BEARING TEFLON PTFE 9 O-RING RUBBER HIGH NITRILE 10 SHAFT STAINLESS STEEL AISI 410 11 PIN STAINLESS STEEL AISI 410 DIMENSIONS IN mm NOMINAL SIZE A+2.0 ???B C~ D1~ F L~ E~ 40mm 33 42 66 202 80 125 135 50mm 43 52 70 212 90 125 135 65mm 46 68 85 222 106 125 135 80mm 46 83 90 250 124 125 135 100mm 52 103 110 275 150 125 135 125mm 56 127 130 290 185 125 135 150mm 56 152 140 310 210 125 135 200mm 60 202 170 345 270 125 135 250mm 68 253 210 400 325 167 180 300mm 78 303 248 430 375 167 180
Yes! I am InterestedRequest A Callback
Cast Iron Butterfly Valve PN-16 (Wafer Type)
Product Price: Rs 1,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Power | Manual |
| Material | Cast Iron |
| Brand | AUDCO,L & T,HAMMER,QINN |
| Operator | Electric Actuator, Lever |
| Media | Gas, Air, Water |
| Condition | New |
| Operation Type | By Motor, By Gear, By Lever, By Actuator |
| Temperature of Media | High Temperature, Normal Temperature, Low Temperature, Medium Temperature |
| Pressure | Low Pressure,Medium Pressure,High Pressure |
| Size | 1/2 |
Cast Iron Butterfly Valve Wafer Type
CI027 Cast Iron Butterfly Valve PN-16 (Wafer Type)| P. NO. | NAME OF PART | MATERIAL | ||
|---|---|---|---|---|
| 2 | HANDLE | 1-1/2"UP TO 6" | M.S. SHEET (IS 2062) / C.C.S. (ASTM A216 Gr. WCB) / NODULAR IRON (B.S. 2789 Gr. 500/7) |
|
| 8" TO 12" | ||||
| 2 | SPRING WASHER | CARBON STEEL | ||
| 3 | COVER PLATE | M.S. SHEET | ||
| 4 | NUTS | C.S (BS 4190) / ALLOY STEEL (ASTM A194 Gr. 2H) | ||
| 5 | BOLTS | C.S (BS 4190) / ALLOY STEEL (ASTM A193 Gr. B7) | ||
| 6 | BODY | C.I. (EN 1561 Gr. GJL 200) | ||
| 7 | UPPER STEM | S.S. (ASTM A276 TYPE 410) OR ITS EQ. | ||
| 8 | 'O' RING | BUNA-N / EPDM (SHORE HARDNESS 60°±4) | ||
| 9 | MOULDED LINER | BUNA-N / EPDM (SHORE HARDNESS 70°±4) | ||
| 10 | LOWER STEM | S.S. (ASTM A276 TYPE 410) OR ITS EQ. | ||
| 11 | BUSHING | HEAVY DUTY CORROSION RESISTANT TO ABSORB SIDE THRUST | ||
| 12 | WASHER | BUNA-N/EPDM (SHORE HARDNESS 60°±4) | ||
| 13 | GRUB SCREW | MILD STEEL | ||
| 14 | DISC | D.I. (ASTM A395) | ||
| 15 | 'BUSH | PH. BRONZE/PTFE | ||
| 16 | TAPER PIN | STEEL (HARDENED) | ||
| 17 | GEAR BOX | C.I (E.N 1561 Gr. GJL 200) | ||
| 18 | HAND WHEEL | C.I (E.N 1561 Gr. GJL 200) / M.S. (IS 2062 Gr.B) | ||
Additional Information:
- Packaging Details: MATERIALS OF CONSTRUCTION PART NO. PART'S NAME MATERIALS SPECIFICATIONS 1 HANDLE SG IRON BS:2789 2 LEVER SG IRON BS:2789 3 SPRING SPRING STEEL BS: 1726 EN47 4 LOCKING PLATE CARBON STEEL ----- 5 BODY CAST IRON BS: 1452 Gr220 6 BOLTING CARBON STEEL BS: 916 7 SEATING LINER RUBBER NITRILE 8 DISC / WEDGE S.S. AISI 304, CF8 9 BEARING TEFLON PTFE 10 O-RING RUBBER HIGH NITRILE 11 SHAFT STAINLESS STEEL AISI 410 12 PIN STAINLESS STEEL AISI 410 DIMENSIONS IN mm NOMINAL SIZE A+2.0 ???B C~ D1~ E F 40mm 33 42 66 126 152 80 50mm 43 52 70 135 152 90 65mm 46 68 85 147 152 106 80mm 46 83 90 158 175 124 100mm 52 103 110 178 210 150 125mm 56 127 130 200 300 185 150mm 56 152 140 220 300 210 200mm 60 202 170 220 300 270 250mm 68 253 210 265 440 325 300mm 78 303 248 295 440 375 APPLICATIONS WATER STEAM GAS OIL AIR
Yes! I am InterestedRequest A Callback
KSB Make Gate, Globe, Non Return Valves
Product Price: Rs 1,000 / PieceGet Best Price
Product Details:
| Operator | Electric Actuator, Lever |
| Media | Gas, Water, Air |
| Material Type | Cast Iron |
| I Deal In | New Only |
| Operation Type | By Lever, By Actuator, By Gear |
| Is It Customized | Customized |
| Temperature of Media | High Temperature, Low Temperature, Medium Temperature |
| Pressure | Low Pressure,Medium Pressure,High Pressure |
| WOG Rating | 600, 150, 300 |
| Material | CAST STEEL |
| Is It Branded | Branded |
| Power | Hydraulic |
| Condition | New |
Gate valveSTAAL 40 AKD/AKDSGate valve to DIN/EN with flanged ends (AKD) or butt weld ends (AKDS), with bolted bonnet, body of forged or welded construction, non-rotating stem, split wedge with flexibly mounted discs for precise alignment with the body seats. Seat/disc interface made of wear and corrosion resistant 17 % chrome steel.Select ProductSee all documents and downloadsMain Applications
- Chemical industry
- Boiler feed applications
- Boiler recirculation
- Cooling circuits
- Nominal pressurePN 10, PN 16, PN 25, PN 40
- Max. nominal sizeDN 900
- Max. allowed fluid tempe
KSB is the brand with the greatest technical expertise in pumps and valves.” KSB has been growing continuously since it was founded in 1871. Today the Group is a leading international manufacturer of pumps and valves and has a presence on all continents with its own sales and marketing companies, manufacturing facilities and service operations. More than 14,000 employees generate annual consolidated sales revenue of over two billion euros. Fields of application for KSB products KSB supplies equipment for the following applications Building services Process engineering Water treatment Water transport Energy conversion Solids transport KSB products are used to transport or shut off fluids, including Clean or contaminated water Aggressive and explosive fluids Corrosive and viscous fluids Fluid/solid mixtures and slurries Product Range : CS Gate Flanged End CS Globe Flanged End CS Check Valves Flanged End A 105/ F 22 Gate Valve BSPT/SWE A 105/ F 22 Globe Valve BSPT/SWE A 105/ F 22 Check Valve BSPT/SWE
Yes! I am InterestedRequest A Callback
Gate Valves S S, C S, F S
Product Price: Rs 1,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Usage/Application | Water |
| Valve Size | 2 " TO 24 " |
| Material | Stainless Steel |
| End Connection Type | Flanged |
| Media | Water, Gas, Air |
| Pressure | Low Pressure,Medium Pressure,High Pressure |
| Temperature of Media | High Temperature, Medium Temperature, Low Temperature, Normal Temperature |
| Condition | New |
Salient Feature
- Meets design requirement of ASME B 16.34 / API 600 / API603 /API 6D and testing requirement API 598 / BS 6755 / API6FA / ISO 5208
- Outside Screw and Yoke Construction Valves provided with back seating arrangement Solid, flexible, split wedge and parallel slide are available Renewable, seal welded seat ring or integral seat ( Cast SS. only ) available.
- Specially designed die formed graphite packing, controlled clearance between stem, gland and bonnet bushing for guaranteed low emissions meet 100 PPM maximum fugitive emission levels.
- Anti - friction ball thrust bearing in yoke sleeve for higher size and classes Grub Screw : Secures yoke nut in the bonnet Gress Nipple : Supplies lubricant to the mating parts Flanged End or butt welding end Flanged end dimensions conform to ANSI / ASME B 16.5 / API 605 / DIN / BS 3293 Butt welding end dimensions conform to ANSI / ASME B 16.25 Face to Face and End Dimensions conform to ASME / ANSI B 16.10 / DIN / BS 2080 Bi - directional shut-off.
- Extended bonnet provided for low temperature and cryogenic services (cold box and non cold box applications) to conform to requirement of BS-6364
- Deep stuffing box - with lantern ring
- Self - aligning two piece gland
- Gear Box / Chain Wheel design available
- Electric or pneumatic actuator design available
- Ring joint facings available in higher classes
- Locking arrangement optional
- By-Pass, Drain Plug design available
- Stellited seating hard facing are provided on request
- Alloy-20, Monel, Hstelloy B & C, CF3 & CF3M Materials on request
Yes! I am InterestedRequest A Callback
Cast Iron Ball Valve Flanged Ends
Product Price: Rs 1,000 / PieceGet Best Price
Product Details:
| Size | 1/2" UP TO 12 " |
| Pressure | Vacuum, High Pressure, Medium Pressure, Low Pressure |
| Material | Stainless Steel |
| WOG Rating | 150, 300, 600 |
| Temperature of Media | Low Temperature, Medium Temperature, High Temperature |
| Is It Branded | Branded |
| Branded | Branded |
| Condition | New |
Product details :- full bore three piece design with s.S ball & stem, teflon seat , blow off proof stem,lever operated
End details :-
Flanged to bs-10 table 'f'/e/d
Or ansi class-150
Or bs:4504 pn10/16
Testing :- (hyd.)
Body test pressure : 300 psig.
Seat test pressure : 300 psig.
|
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Additional Information:
- Packaging Details: MATERIALS OF CONSTRUCTION PART NO. PART'S NAME MATERIALS SPECIFICATIONS 1 HANDLE CARBON STEEL ... 2 TOP NUT CARBON STEEL BS:916 3 GLAND NUT CARBON STEEL BS:916 4 GLAND PACKING TEFLON PTFE 5 STEM S.S AISI-410 6 STEM SEAL TEFLON PTFE 7 SEATS TEFLON PTFE 8 BALL S.S. ------ 9 CONNECTOR C.I. BS:1452 GR220 10 SEALINGS RUBBER NITRILE 11 BODY C.I.. BS:1452 GR220 12 NUT/ STUD CARBON STEEL BS:916
Yes! I am InterestedRequest A Callback
Brass Ball Valve
Product Price: Rs 100 / PieceGet Best Price
Product Details:
| Brand | R & N / MITRAIX |
| Valve Size | 1/2" to 2" |
| Media | Air, Water, Gas, Fuel, Powder/Solids |
| Automation Grade | Semi-Automatic |
| Color | Silver |
| Condition | Second hand |
BRASS BALL VALVE
Suitable for domestic water services, heating and air-conditioning plants, compressed air systems.
Female/Female threads
T handle in aluminium
Body in nickel-plated brass
Minimum and maximum working temperatures:
-20°C, 150°C in absence of steam
Threads: ISO228 (equivalent to DIN259 and BS2779)
NOTE:
For Brass Ball Valve F/F 'T Handle'
diagram please refer Brass Ball Valve
F/F diagram.
Yes! I am InterestedRequest A Callback
Wafer Check Valve
Product Price: Rs 1,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Material Grade | C I & S S |
| Size | 1 " TO 12 " |
| Brand | ZOLOTO, QINN, HAMMER, SANT,LEADER |
| Material | Cast Iron, Stainless Steel |
| Media | Water, Fuel, Powder/Solids, Air, Gas |
| Valve Size | 1" TO 12 " |
| Condition | New |
Product Specification
| Size | 1" TO 8" |
| Brand | QINN/ HAMMER,SANT |
| Material | Aluminum, Cast Iron, Stainless Steel |
| Media | Water, Fuel, Powder/Solids, Gas, Air |
| Power | Hydraulic,Manual,Pneumatic |
| Seat Test Pressure | M s wafer check valveBody m sDisc m sMFG STD gen. Conf. to API 6DEnd Wafer typeHyd. Test press.Body 16kgSeat 11.5kgTemperature 100cSize 1.1/2" to 12" ready stock |
| Automation Grade | Automatic |
| Power Source | Hydraulic, Pneumatic, Manual |
| Condition | New |
| Minimum Order Quantity | 1 Piece |
Wafer Type Ms Check Valve
Product Specification
| Size | 25mm To 300mm |
| Material | MS |
| Brand | Racer |
| Shape | Round |
Body m s
Disc m s
MFG STD gen. Conf. to API 6D
End Wafer type
Hyd. Test press.
Body 16kg
Seat 11.5kg
Temperature 100c
Size 1.1/2" to 12" ready stock
Product Specification
| Size Range | D63 mm to D315 mm (2"- 12") |
| Pressure Rating | PN 16 (max) |
| Operating Temperature Range | -500 C to 2000 C (depending on MOC) |
| Minimum Return Pressure | 0-2 bar (3 psi) |
Technical Specifications:
- Valve Type: Self-acting non-return valve.
- Description: Single plate wafer type swing check valve.
- Body Type: Short pattern wafer type
- Disc Type: With integral hinge pin
- Model nomenclature: IVC-check valve with rubber O-ring seat and face sealing
- IVCT-check valve with PTFE seat and serrated contact faces
- Seat Leakage: Zero leak / tight shut off
Standard Material of Construction (MOC):
- Body: SGI/WCB/CF8/CF8M/CS-IS 2062
- Disc: SGI/WCB/CF8/CF8M
- Seat: EPDM/Viton/Nitrile/Neoprene/Hypalon-for IVC
- PTFE or GFT-for IVCT
Product Image
Yes! I am InterestedRequest A Callback
Cast Iron Butterfly Valve Wafer Type
Product Price: Rs 1,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Type | WAFER TYPE & ACCURATE R |
| Size | 2 " TO 36 " |
| Material | Cast Iron |
| Pressure | Low Pressure,Medium Pressure,High Pressure |
| Power | Hydraullic |
| Operator | Lever, Electric Actuator |
| Media | Gas, Air, Water |
| Temperature of Media | Normal Temperature, Low Temperature, High Temperature, Medium Temperature |
| Operation Type | By Gear, By Motor, By Lever |
| Is It Customized | Customized |
qinn cast iron butterfly valve wafer type
(sgi disc-lever operated)
product details:- tight shut off type, integrally moulded, rubber liner, lugs provided,compatible with
flanges to bs-10 tables - d & e,bs:4504,section-3. 1 pn10 & pn16& ansi - class 125 & 150
end details:- wafer short ends with integrally moulded rubber gasket
testing :- hydraulic.
body tested:- 21bar
seat tested:- 16bar
| ||||||||||||||||||||||||
Additional Information:
- Packaging Details: MATERIALS OF CONSTRUCTION PART NO. PART'S NAME MATERIALS SPECIFICATIONS 1 HANDLE SG IRON BS:2789 2 LEVER SG IRON BS:2789 3 SPRING SPRING STEEL BS: 1726 EN47 4 LOCKING PLATE CARBON STEEL ----- 5 BODY CAST IRON BS: 1452 Gr220 6 BOLTING CARBON STEEL BS: 916 7 SEATING LINER RUBBER NITRILE 8 DISC / WEDGE SGI BS:2789 9 BEARING TEFLON PTFE 10 O-RING RUBBER HIGH NITRILE 11 SHAFT STAINLESS STEEL AISI 410 12 PIN STAINLESS STEEL AISI 410 DIMENSIONS IN mm NOMINAL SIZE A+2.0 ???B C~ D1~ E F 40mm 33 42 66 126 152 80 50mm 43 52 70 135 152 90 65mm 46 68 85 147 152 106 80mm 46 83 90 158 175 124 100mm 52 103 110 178 210 150 125mm 56 127 130 200 300 185 150mm 56 152 140 220 300 210 200mm 60 202 170 220 300 270 250mm 68 253 210 265 440 325 300mm 78 303 248 295 440 375
Yes! I am InterestedRequest A Callback
Pneumatic Y Type Strainer Valve
Product Price: Rs 99 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Size | 1/2" |
| Finishing | STEEL |
| Material | Stainless Steel |
| Brand | Festo |
| Media | Water |
| Color | SILVER |
Product DescriptionOwing of our extremely talented team of professionals, we are engaged in offering excellent quality Y Type Pneumatic Control Valves. Keeping in mind the various demands of the patrons, these valves are available in different sizes, designs and technical specifications. The offered valves are manufactured from the superior grade raw material and with the aid of sophisticated techniques. In addition, our valued clients can avail these valves from us at reasonable rates.
Specifications:
| Product | Y type pneumatic control valves |
| Port Size | 1″ To 2″ BSP / NPT |
| Body & Sleeve | SS ASTM A 351 Grade CF 8 / CF 8 M |
| End Connection | Screwed / Flange |
| Pnem. Pressure | 3.5 To 7 bar |
| Shaft | SS-304 / SS-316 |
| Fluid Temp | -10°C to 180°C |
| Media | Air, water, steam, gas, oil, fuel, liquid, vacuum |
| Actuator Type | |
| Actuator cover | SS-304 |
| Actuator Flange | Aluminium die cast (hard anodised) |
| Actuator Working pressure | 3.5 To 7 bar |
| Life | More than one million cycle |
Product Image
Yes! I am InterestedRequest A Callback
View More