- Home
- ยป
- Our Products
- »
- VALVES
VALVES
industrial valves
Fire Safe Design Ball Valves,
Minimum Order Quantity: 1 Piece
Product Brochure
Valve Size | Less than 6 mm |
Material | Stainless Steel |
Size | 1/2" to 24 " |
Body | S S,C S,FORGED,C I |
Pressure | High Pressure |
End Connection Type | Flanged |
Connector Type | Flanged End |
Type | Direct |
Temperature Of Media | High Temperature, Low Temperature, Medium Temperature |
WOG Rating | 300, 150, 600 |
Forged Gate, Globe, Check & Ball Valves
We offer superior quality & we fabricate our product as per international quality standards ISO 9001:2015 & CE/PED approved, Fire safe design. our product range as below,
Product SpecificationMaterial | Stainless Steel |
Finishing | Polished |
Tensile Strength | 100-300Mpa |
Working Pressure | 1000 wog for 2-pc ball valve threaded end |
Steel Grade | SS316 |
Hardness | 20-60HRC |
- Oil piping systems.
- High-pressure & Extreme temperature flow systems.
- Chemical servicing.
- Corrosive substances processing.
1. Forged Gate, Globe, Check & Ball Valves from 1/2" to 2", Class upto 1500#
2. Cast Steel Ball Valves from 1/2" to 8", Class 150, 300 & 600
(Floating, Trunnion, ISO mounting, extended stem,etc.)
3. High Pressure Ball valves 1/2" to 2", 3000 & 6000 PSI
We request you to give us a chance to prove ourselves, our products & our service. We assure you that after one dealing we will be there in the list of your favorite and trusted suppliers. In future you will not look further for your requirements regarding industrial valves.
Cast Iron Sluice Valve
Minimum Order Quantity: 1 Piece
Product Brochure
Valve Size | 12 inches |
Size | 1/" TO 24 " |
End Connection Type | Flanged |
Material | Steel |
Temperature | STD |
Surface Finishing | STD |
Product Type | STD |
Features | STD |
Trim | STD |
Body Tested | STD |
Seat Ring | STD |
Tensile Strength | STD |
Gland Packing | STD |
Bonnet Material | STD |
Application | STD |
Port Size | STD |
Rating | STD |
Usage | WATER |
Seat Orifice Size | STD |
Hardness | STD |
Packaging | STD |
Trim Material | STD |
Media | Air, Gas, Water |
Hand Wheel | STD |
Inner Diameter | STD |
Stem | STD |
Shell Wall Thickness | STD |
Power | Manual |
Packaging Type | STD |
Pressure | Low Pressure,Medium Pressure,High Pressure |
Flange Diameter | STD |
Number Of Ways | STD |
Weight | STD |
Surface Treatment | STD |
Material Grade | STD |
Number Of Holes | STD |
Hole Diameter | STD |
Temperature of Media | High Temperature |
Color | STD |
I Deal In | New Only |
Rust Resistant | Yes |
Automation Grade | Manual |
Condition | New |
Country of Origin | Made in India |
These are extremely treasured for their compact designs, high quality, durability and easy installation. Further, our exclusive array of valves is manufactured using premium quality raw material and advanced machines in compliance with international quality standards. These are available in various sizes, designs, shapes and at the affordable prices.
Specifications:
- All flanged are faced and drilled as per IS-1538 / 1993
- Special cases flanges may be drilled as per BS, DIN, ANSI and other international Standards upon request to suit specific requirements
- Comes with cap or hand wheel at the top for operation, spur gear, bevel gear, worm gear, head stock arrangements, chain wheel arrangements & bye pass arrangements
- Sluice Valves are designed by Nominal Pressure (PN) defined as the maximum permissible.
Gauge Working Pressure (MPA) is as follows:
Nominal Pressure (PN) | Nominal Size |
MPa | mm |
PN - 1.0 | 50 to 1200 |
PN - 1.6 | 50 to 600 |
C I Diaphragm Valves
Minimum Order Quantity: 1 Piece
Valve Size | 1 " TO 12 " |
Usage/Application | Water |
Material | C I WITH RUBBER LINE |
Pressure | High Pressure |
Brand | SUN |
Size | 1" to 12" |
Connection Type | Flanges |
Body Style | Globe Type |
Media Type | Water, Oil, Gas |
Power | Manual, Hydraulic |
C I Diaphragm Valve Flanged End Rubber Lined
Product DescriptionCast Iron Diaphragm Valve Weir Type - Series 7 - Flanged Drilled to Table D - Hand wheel operated
Pressure Rating: PN 16
Body/Bonnet/Compressor: CI FG 260
Diaphragm: Reinforced Neoprene
Lining: Unlined/Nitrile/EPDM/Butyl/Silicon/Viton/Ebonite
Spindle Bush: SGI
Spindle: EN8 / SS 410 / SS 304 / SS 316 / SS 316L
Hand Wheel: CI FG 260 / SGI
Size: DN 15 - DN 150
Product Image
Lintas Make Stainless Steel Ball Valve 2 Pc. Screwed End Code No.: LI-016
Minimum Order Quantity: 1 Piece
Size | 1/2 inch |
Usage/Application | Industrial |
Pressure | High Pressure |
End Connection Type | Screwed |
Connector Type | Screwed |
Valve Size | 1/2" to 2 " |
Brand | LINTAS |
Model Name/Number | LI-016 |
Nominal Size | 2 inch, 3 inch, 3/4 inch |
Steel Grade | CF8 304 & CF8M,3016 |
Fluid Type | Oil, Water, Compressed Air |
Temperature Of Media | Medium Temperature, Low Temperature, High Temperature |
WOG Rating | 300, 150 |
Media | Gas, Water, Air |
Condition | New |
Is It Customised | Customised |
Is It Flexible | Flexible |
Color | Transparent |
Material | Stainless Steel Ball Valve |
Country of Origin | Made in India |
Lintas Make Stainless Steel Ball Valve 2 Pc. Screwed End Code No.: LI-016
LI-BV-01-3SEStainless Steel 3 Pcs Ball Valve Screwed-End (Lintas)Features
- Superior Quality Stainless-Steel Investment Casting
- Confirms to Class-150
- Design Standard BS EN ISO 17292 (BS 5351).
- Screwed Female Ends to BSPT / NPT.
- Three Piece Design.
- Superb in Quality and Performance.
- Available in SS304(CF8) & SS316(CF8M) Grades.
Test Pressure (Hydrostatic) :
Shell : 31 kg/cm²g (440 Psi)
Maximum Working Pressure: 21 kg/cm²g (300 psi)
Seat (Pneumatic) : 7kg/cm²g (100 psi)
Maximum Working Temperature: 220°C
Water, Air, Gas, Oil, Steam
Download PDF Start WhatsApp Chat Send Inquiry
Materials of ConstructionPart Name | Specifications / Material | Qty |
---|---|---|
Body | SS:304 | 1 |
Connector | SS:304 | 2 |
Ball | SS:304 | 1 |
Seat Ring | PTFE | 2 |
Stem | SS:304 | 1 |
Ring Washer | PTFE | 2 |
Gland Packing | PTFE | 1 |
Thrust Bearing | PTFE | 1 |
Stud / Nut | SS:304 | 4 Set |
Spring Washer | SS:304 | 8 |
Gland Nut | SS:304 | 1 |
Stem Nut | SS:304 | 1 |
Lever | SS:304 | 1 |
Stem Washer | SS:304 | 1 |
Size (mm) | A | B | C |
---|---|---|---|
15 | 1/2″ BSP/NPT | 69.00 | 56.00 |
20 | 3/4″ BSP/NPT | 73.00 | 64.00 |
25 | 1″ BSP/NPT | 89.00 | 75.00 |
32 | 1.1/4″ BSP/NPT | 105.00 | 82.00 |
40 | 1.1/2″ BSP/NPT | 115.00 | 88.00 |
50 | 2″ BSP/NPT |
Additional Information:
- Port of Dispatch: undefined
Brass Forging Ball Valve
Minimum Order Quantity: 1 Piece
Material | SS |
Media | Water, Gas, Fuel, Air |
Application | Pneumatic Connections |
Valve Size | 1/2" TO 8" |
Type | Ferrule, Swivel Nut, Staplock Fittings, Adapters |
Automation Grade | Semi-Automatic |
Condition | New |
- Specifications
- Benefits
» Material - Full brass forged body. (Nickel plated)
- Specifications
- Benefits
» Material - Full brass forged body. (Nickel plated)
» Seat ring – Virgin PTFE (Teflon).
» Lever – Dacromet coated steel handle.
» Spindle – Blow out proof.
» Ball – Super finish chrome plated
» End threads – BSP to ISO 228 at both ends.
» Temp. Working: -20 to 180 degree C.
» Pressure rating – 25 Bar (at 60 degree C).
» Material grade, size & pressure rating permanently roll marked on the surface.
» Dust and thread protection Cap.
» Seat ring – Virgin PTFE (Teflon).
» Lever – Dacromet coated steel handle.
» Spindle – Blow out proof.
» Ball – Super finish chrome plated
» End threads – BSP to ISO 228 at both ends.
» Temp. Working: -20 to 180 degree C.
» Pressure rating – 25 Bar (at 60 degree C).
» Material grade, size & pressure rating permanently roll marked on the surface.
» Dust and thread protection Cap.
Forged Brass Ball Valve
Minimum Order Quantity: 1 Piece
Material | Stainless Steel |
Usage/Application | Industrial |
Brand | INDIANO |
Valve Size | 1/2" UP TO 2 " |
Place Of Origin | Pan India |
Media | Air, Water, Gas |
Brass ball valves can be installed bi-directional.Size Specification
- Specifications
- Benefits
» Material - Full brass forged body. (Nickel plated)
- Specifications
- Benefits
» Material - Full brass forged body. (Nickel plated)
» Seat ring – Virgin PTFE (Teflon).
» Lever – Dacromet coated steel handle.
» Spindle – Blow out proof.
» Ball – Super finish chrome plated
» End threads – BSP to ISO 228 at both ends.
» Temp. Working: -20 to 180 degree C.
» Pressure rating – 25 Bar (at 60 degree C).
» Material grade, size & pressure rating permanently roll marked on the surface.
» Dust and thread protection Cap.
» Seat ring – Virgin PTFE (Teflon).
» Lever – Dacromet coated steel handle.
» Spindle – Blow out proof.
» Ball – Super finish chrome plated
» End threads – BSP to ISO 228 at both ends.
» Temp. Working: -20 to 180 degree C.
» Pressure rating – 25 Bar (at 60 degree C).
» Material grade, size & pressure rating permanently roll marked on the surface.
» Dust and thread protection Cap.
Cast Steel '''''''' Y'''''''' Type Strainer
Minimum Order Quantity: 1 Piece
Valve Type | '' Y'' Type Strainer |
Material | C I,S S |
Media | Water, Air, Gas |
Usage/Application | Pharmaceutical / Chemical Industry |
End Connection | Screwed End, Butt Weld, Flange End |
Automation Grade | Manual |
product details - stainless steel perforated sheet screen screwed in cover with release plug. End details - flanged ends as per bs10 table 'j' testing - 700 psig (hyd. ) working pressure - suitable for steam up to 350 psig max. Working temp 400 c materials of construction part no. Part's name materials specifications 1 body cast steel astm a216 gr. Wcb 2 screen s. S. Aisi-304 3 gasket caf steam jointing 4 cover cast steel astm a216 gr. Wcb 5 studs and nuts carbon steel bs916 6 gasket caf steam jointing 7 drain plug cast steel astm a216 gr. Wcb dimensions in mm nominal size a d t l(+-1. 5) h~ 25mm 25 121 19 181 140 40mm 38 140 22. 2 260 152 50mm 50 165. 1 25. 4 277 182 65mm 63. 5 185 25. 4 277 225 80mm 76. 2 203 31. 7 296 275 100mm 100 229 35 403 300 applications water steam gas oil air
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,NEFT CHEQU
- Port of Dispatch: MUMBAI
- Packaging Details: Jacketed Assembly When conveyants must be maintained at a specified temperature steam jacketing is used frequently, often in lieu of electric tracing. Guarded Assembly Use of external flexible armour protects metal hose from abuse due to rough handling, abrasion and bending below it's limits. Often a rubber cover can accomplish this as well as armour if temperatures will permit. Line Assembly If high conveyant velocities are required, use of a internal flexible metal liner will prevent damage and reduce abrasion problems
S S 304 Techno Make Ball Valve
Minimum Order Quantity: 1 Piece
Connector Type | Screwed |
Material Grade | S S 304 & 316 |
Material | Brass, Plastic, Stainless Steel |
End Connection Type | Screwed |
Size | 1/2" TO 12 " |
Valve Size | 1/2" TO 12 " |
Pressure | Low Pressure,Medium Pressure,High Pressure,Vacuum |
Media | Fuel, Water, Air, Gas |
Automation Grade | Semi-Automatic |
WOG Rating | 150,300,600 |
Branded | TECHNO |
Condition | New |
Fire Safe | No |
Product Specification
Media | Air, Water, Gas, Fuel |
Material | Stainless Steel |
Pressure | Low Pressure, Medium Pressure, High Pressure, Vacuum |
Automation Grade | Semi-Automatic |
WOG Rating | 150, 300, 600 |
Branded | Branded |
Condition | New |
Fire Safe | No |
Product Image
Balancing Valves Flanged Ends
Minimum Order Quantity: 1 Piece
Size | 1 " TO 6" |
Pressure | High Pressure, Low Pressure, Vacuum, Medium Pressure |
Temperature of Media | Normal Temperature, Low Temperature, High Temperature, Medium Temperature |
Is It Branded | Branded |
Branded | Branded |
Condition | New |
C I Balancing Valves
Type - Flanged Ends
:
Metal Of Casting : C I
Brand: Castle Valves
Product Code: PN-16
Availability: In Stock
Description:
Balancing Valve with Pressure Test Cock & in-built locking facility:
Double Flanged- CI:IS:210:78FG220 Bonnet-SG Iron IS:1865 Gr 420/7
Stem: AISI 410 Seat:Nitrile/EPDM Handwheel: Poly Amide(upto 125mm)
Working Pressure: 16 kg/Sq.cm Temperature: (-)10 to 90 deg.C
Three Piece Flanged End Floating Ball Valve
Minimum Order Quantity: 1 Piece
Media | Gas, Powder/Solids, Fuel, Water, Air |
Pressure | Vacuum, High Pressure, Low Pressure, Medium Pressure |
Material | Stainless Steel, Brass, Plastic, Rubber |
Branded (Y/N) | Yes |
Temperature of Media | Medium Temperature, Low Temperature, Normal Temperature, High Temperature |
Size | 1/2" TO 8 " |
WOG Rating | 600, 150, 300 |
Automation Grade | Manual |
Condition | New |
Color | Silver |
Is It Branded | Branded |
Three Piece Flanged End Floating Ball Valve
With our vast experience & knowledge in this field, we are engaged in manufacturing a quality-assured range of Three Piece Flanged End Floating Ball Valve.
Features:
Sturdiness
Easy installation
Can withstand high pressure
Specifications:
Design & Manufacturing: ASME B16.34, ISO 17292, BS 5351
Testing Standard: EN 12266 -I, BS 6755(Part - 1)
Material:- A216 GR. WCB, A351 GR. CF8, CF8M, Duplex Steel, Etc.
CI MS, SS-304/316 add this in content as material
Class: ASME B16.5 CL. 150# (300#, 600# & Above On Request.)
Suitable Medium: Water, Oil, Air & Some corrosive liquid
Flanged End: ASME B16.5(Table Flange On Request)
Face to Face: ASME B16.10
Operation: Lever, (Pneumatic on Request)
Technical Specifications:
DescriptionMaterial CIMaterial WCBMaterial CF8Material CF8MPcsSleevePVCPVCPVCPVC1Lever NutMS/ A194 GR. 2HMild SteelStainless SteelStainless Steel1LeverMILD STEELMild SteelStainless SteelStainless Steel1NutsMS/A194 GR.2HMS/A194 GR. 2HASTM A194 GR.8ASTM A194 GR.8M8StudsMS/A193 GR.B7MS/A193 GR.B7ASTM A193 GR.B8ASTM A193 GR. B8M4Gland NutMILD STEELMild SteelStainless SteelStainless Steel1Gland BushAISI SS-202AISI SS-304AISI SS-304AISI SS-3041Gland RingPTFE/RPTFEPTFE/RPTFEPTFE/RPTFEPTFE/RPTFE2O RingPTFE/RPTFEPTFE/RPTFEPTFE/RPTFEPTFE/RPTFE2Seat RingPTFE/RPTFEPTFE/RPTFEPTFE/RPTFEPTFE/RPTFE2Stem/PinAISI SS-202AISI SS-304AISI SS-304AISI SS-3161BallAISI SS-304 (Ni-4%)AISI SS-304AISI SS-304AISI SS-3161
Sun Make Diaphram Valves
Usage/Application | Water |
Pressure | High Pressure |
Valve Size | 1/2" TO 6" |
Size | 15 MM 1/2" TO 6" |
Brand | SUN |
Material | C I |
Type | DIAPHRAM |
Connection Type | Flanges |
Media Type | Water, Oil, Gas |
product specification
brand | sun |
usage/application | water |
pressure | high pressure |
valve size | 1 " to 12 " |
size | 1" to 12" |
material | c i with rubber line |
connection type | flanges |
body style | globe type |
media type | oil, gas, water |
power | manual, hydraulic |
minimum order quantity | 1 |
ci diaphragm valve flanged end rubber lined
product descriptioncast iron diaphragm valve weir type - series 7 - flanged drilled to table d - hand wheel operated
pressure rating: pn 16
body/bonnet/compressor: ci fg 260
diaphragm: reinforced neoprene
lining: unlined/nitrile/epdm/butyl/silicon/viton/ebonite
spindle bush: sgi
spindle: en8 / ss 410 / ss 304 / ss 316 / ss 316l
hand wheel: ci fg 260 / sgi
size: dn 15 - dn 150
Cast Iron Y-Type Strainer (Screwed)
With Copper Base | No |
Media | Air, Gas, Water |
End Connection | Flange End, Screwed End |
Automation Grade | Manual |
Size | 1/2 " ON WORDS |
Application | Automobile Industry, Pharmaceutical / Chemical Industry, Construction, Oil & Gas Industry |
Cast Iron Y-Type Strainer (Screwed )
Specifications & Features:
Screwed female ends to BSPT.
Stainless steel / brass 1mmm hole diameter per forated sheet screen in guided in the body and cover.
Fine finish and smooth contours reduce pressure drop in the strainer.
Lage screening area makes the strainer efficient in the performance.
Much longer seat life because of bronze /S.S. to rubber contact.
MATERIALS OF CONSTRUCTION
SIZE / DIMENSIONS:
Additional Information:
- Item Code: 1069
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,NEFT CHEQUE
- Port of Dispatch: MUMBAI
Balancing Valve - Flanged - Advance Make
Minimum Order Quantity: 1 Piece
Size | 1/2" TO 12 " |
Material | C I BRASS |
Model Name/Number | AS PER SIZE MODEL NO- |
Brand | Advass & Honevel |
Connections | SCREWED & FANGED |
Corrosion Resistance | H |
Media | WATER ,STEM,OTHER PURPOSE |
Balancing Valve Flanged Advance make
The salient features include :-
Precise double regulation
Tamper-proof setting, with handwheel or lockshield
Low flow-noise emission
With or without Drain Cocks
With or without Pressure Test Cocks
Positive shut-off
Exceeds IS 778 - 1984
Can eliminate separate Flow Measuring Device.
Flanged in Cast iron for PN16, Ductile Iron for PN20
Size from 3" upto 12"
EPDM for Cast iron Construction.
Economy in installation & Operation
Application
Control And Shut – Up Flanged Valves.
As double regulating, balancing and shut-off valve in open or closed hydronic heating/cooling system and cooling water system in process industry for balanced flow. With special alloys, these valves can be used in Process Plants too for double regulation & flow measurement functions for balanced flow.
Installation Dimensions
National SizeDN mm (inch)080 (3")100 (4")125 (5")150 (6")200 (8")250 (10")300 (12")Amm310350400480600730850Flange ODmm200220250285340405460Bmm290410450490590760820Φ Cmm170222222290385538538Strokemm32404957698096Handwheel Turns810121413.51214.5WeightKg.27426084165377460
Why Balancing Valves | Design Features | Flow Characteristics | Application | Installation Dimensions | Enquiry
Forged Steel Gate Valve
Minimum Order Quantity: 1 Piece
Connector Type | Screwed |
Model Name/Number | STD |
Size | 1/2" to 8" |
Material | Brass, Stainless Steel |
Brand | AUDCO.L& T ,SANT,W J NEETA |
End Connection | SCREWED,FLANGED END , THREADED |
Media | Gas, Oil, Water |
Automation Grade | Manual |
Condition | New |
Product Specification
Size | 1/2" to 12" |
Brand | Inter Valve |
Usage/Application | Industrial |
End Connection Type | Socket Weld |
Media | Air, Water, Gas, Fuel |
Material | Forged Steel |
Model | IVGTC |
Pressure | CLASS #800 |
Automation Grade | Manual |
The valves are available in Socket weld, Screwed end, Butt weld & Flange end connections. Valves can be provided with special cleaning for oxygen service, NACE Compliant materials for sour service in the petroleum industries etc.
The valves can be provided with a motor operation for Gate & Globe valves wherever required.
Additional Information
Item Code | IVGST |
Delivery Time | READY STOCK |
Production Capacity | 100 |
Packaging Details | AS PER STANDARD |
Forged Steel Gate Valve
Minimum Order Quantity: 1 Piece
Connector Type | Screwed |
Size | 1/2 " TO 24 " |
Material | C S , F S, Brass, Stainless Steel |
Brand | SANT / W J NEETA/ LEADER |
End Connection | SOCKET WELD,SCREWED,FLANGED END |
Media | Air, Gas, Fuel, Water |
Temperature of Media | Low Temperature, Medium Temperature, Normal Temperature, High Temperature |
Condition | New |
Forged Steel Gate Valve.
Product Details:
Body | 207 Bar |
Type | Hand Wheel Operated |
Temperature of Media | High Temperature |
Brand | Qinn |
With the valuable assistance of skilled team of professionals, we are engaged in offering an extensive range of high-quality Drop Forged Steel Gate Valve.
Product Details:
- Reduced Bore, Bolted Bonnet,Outside Screw & Yoke Type , Rising Stem With Backseat Arrangement ,Stainless Steel (Aisi 410) Trim,Hand Wheel Operated,Conforming To Bs:5352,Class-800
Technical Specification:
P T F E Lined Valves & Equipment
Minimum Order Quantity: 1 Piece
Media | Gas |
Size | 3/4 inch, 2 inch, 1/2 inch, 1 inch |
Application | Chemical Fertilizer Pipe |
Valve Size | 1/2" to 24 " |
Material | C S |
Automation Grade | Automatic |
Condition | New |
P T F E Lined Valves & Equipment
Liner: PTFE, FEB, PFA
Advantages
High chemical resistance
High temperature resistance
Non contaminating
Low cost
Maintenance free
Long durability
PipesLining PTFEThickness2-6 mmSizesNominal bore 20-150mm to order also.Max. Lengthupto 3000mmStd. WallFor pressures and light vacuumHeavy wallFor full vacuum till 150°c and pressure FittingsLiningPTFE/ FEB/ PFAThickness2-6 mmSizesNominal bore 20-150mm To order also.
Single Disc Check Valves S S 304 & 316
Usage/Application | Industrial |
Brand | Zoloto |
Material | Stainless Steel |
Valve Size | 1" to 6" |
Media | Water |
End Connection | Flanged |
S S Disc check Valve
CAST STEEL GATE VALVE
Minimum Order Quantity: 1 Piece
Product Brochure
Size | 1 " TO 18 " |
Model Name/Number | CAST STEEL GATE VALVE |
Brand | HAMMER, L & T , SELMECH |
Body Test Pressure | STD |
Pressure Range | STD |
Design Standard | STANDERA |
Temperature of Media | Medium Temperature, Low Temperature, High Temperature |
Media | WATER & STEEM |
I Deal In | New Only |
CAST STEEL GATE VALVE
C S Gate Valve:
For technical details kindly click on PDF file attached.
Bronze Gate Valve
Valve Size | 1/2" TO 6" |
Material | Brass/Bronze |
Media | Gas, Fuel, Water, Powder/Solids, Air |
Brand | QINN/ SANT/ RMW/ LEADERS |
Size | 1/2" |
Condition | New |
Temperature of Media | High Temperature, Medium Temperature, Low Temperature, Normal Temperature |
Product Details:
Body Test Pressure | 300 Psig. |
Seat Test Pressure | 200 Psig |
Brand | Qinn |
Material | Bronze |
Technical Specification:
Materials Of Construction | ||
Part''s name | Materials | Specifications |
Nut | Carbon Steel | BS:916 |
Washer | Carbon Steel | ----- |
Hand Wheel | Cast Iron | BS:1452,Gr220 |
Stem | Brass | BS:2872,CZ114 |
Gland Nut | Bronze | BS:1400 LG2 |
Gland Bush | Bronze | BS:1400 LG2 |
Gland Packing | Asbestos | ----- |
Bonnet | Bronze | BS:1400 LG2 |
Wedge | Bronze | BS:1400 LG2 |
Body | Bronze | BS:1400 LG2 |
Stuffing Box | Bronze | BS:1400 LG2 |
Dimensions in mm:
S S 316 Spherical Dis Butter Fly Valve Gear Operated Size 10"
Pressure | High Pressure, Medium Pressure, Low Pressure |
Media | Water, Gas, Fuel, Air |
Temperature of Media | Medium Temperature, Normal Temperature, Low Temperature, High Temperature |
Operator | Electric Actuator, Lever |
Condition | New |
Operation Type | By Gear, By Lever, By Actuator, By Motor |
Is It Customized | Customized |
Material | Stainless Steel |
Power | Manual |
SIZE 2" TO 10"
ELEMS Gate Valves
Valve Size | 1/2" to 6" |
Brand | SANT/ ELEMS/ LEADER/ H M / JAI/ JMW/ RMW |
Size | 1/2" to 6" |
Media | Water, Fuel, Gas, Air, Powder/Solids |
Material | Brass/Bronze |
Condition | New |
Temperature of Media | Normal Temperature, High Temperature, Low Temperature, Medium Temperature |
ELEMS/ SANT/ LEADER MAKE GUN METAL GATE VALVE
Clients can avail from us ELEMS Gate valves which are made using high grade raw-material. These valves block the movement of fluid and reduces pressure drops. Our products are appreciated for their durability owing to the stainless steel and carbon steel used in the manufacturing process. Knife valves, linear motion valves and slide valves are other names of these products. In order to provide shut-off, there is a flat closure element slides into the flow stream of linear motion valves.
Leader Make Ball Valves
Minimum Order Quantity: 1 Piece
Usage/Application | Water |
Design | ball type |
Connector Type | Screwed |
Brand | LEADER |
Material | Brass/Bronze |
Valve Size | 1/2" TO 12 " |
Pressure | Low Pressure,Medium Pressure,High Pressure |
Media | Air, Water, Gas, Fuel, Powder/Solids |
End Connection | Socket Weld, Butt Weld, Screwed |
Certification | CE, IBR, EIL |
Temperature of Media | Low Temperature, Normal Temperature, High Temperature, Medium Temperature |
WOG Rating | 300, 600, 150 |
Power Source | Pneumatic, Manual, Hydraulic |
Automation Grade | Automatic |
Is It Branded | Branded |
Condition | New |
Branded | Branded |
LEADER Valves
are approved by world class inspection agencies like Lloyds, Bureau Veritas, Bax Counsel, Gen. Superintendent, E.I.L., N.T.P.C. & T.D.C. used by Govt. of India, Dept. of Atomic Energy (BARC), T.I.F.R., P.P.E.D., B.H.E.L., Ministry of Defence for Warship projects, Country's biggest Ship yard & their Ship building division, Indian Railways, Government owned Refineries & Fertiliser units like HPCL, IOC, OIL, RCF, IFFCO, IPCL & ONGC, first choice by country's leading Air Conditioning expertise in their various projects throughout the country, Private, Public & Govt. owned Heavy Chemicals, Pharmaceuticals, Sugar, Fertilisers & Petrochemicals, Cement, Pulp & Paper Industries, Edible Oil Refineries, Solvent Extraction Plants, Dairy Projects & Distilleries by the approval of country's prestigious Consulting Engineering firms like Dalal Consultants, Humpherys & Glassgow, Davy Power Gas, Simon Carves, Stewarts & Lloyds, BST Engg. Services, E.I.L., Engineering Projects of India Ltd. & Many others.
. | "LEADER" (ISO:9001) G.M. & C.I. Gate, Globe, Check Valves (ISI / Non-ISI), Boiler Mountings, viz. Junction Stop Valve, Safety Valve, Reducing Valve, Non Return Valve, Globe Valve, Blow Down Valve, Strainer, Feed Check Valve, Steam Trap, Water Level Gauge, Injector, Separator, Etc. with IBR T.C. and C.C.S. / F.C.S. High Pressure & High Temperature Gate, Globe & Check Valves with IBR T.C. | ||||||||||
2. | "JNM-SPIRAX" (ISO:9001) Steam Prodcts viz. Thermodynamic Steam Traps, Float Traps, Bucket Traps, Strainers, Sepratators, Sight Glass, Reducing Valves, Safety Valves, etc. & "FORBESON" Pressure Gauges, Dial Thermometers & Temp. Recorders.
|
Mini Ball Valve M/F
Minimum Order Quantity: 1 Piece
Material | Brass, Stainless Steel, Plastic, Casting, Rubber |
Size | 1/4" |
Pressure | Low Pressure, Medium Pressure, High Pressure, Vacuum |
Usage/Application | Industrial |
Connector Type | Screwed |
Color | SILVER |
Temperature Of Media | Medium Temperature, High Temperature, Low Temperature |
Mini Ball Valve M/F
Female/Female threads
Lever handle in nylon
Body in nickel-plated brass
Minimum and maximum working temperatures: 0°C, 90°C
Threads: ISO228 (equivalent to DIN259 and BS2779)
Advance Make Flanged Balancing Valve
Minimum Order Quantity: 1 Piece
Size | 2 " TO 8" |
Usage/Application | Industrial |
Pressure | High Pressure |
Connector Type | Flanged End |
Material | C I & BRASS |
Temperature Of Media | Medium Temperature, High Temperature, Low Temperature |
WOG Rating | 150, 600, 300 |
Brand | ADVANCE |
The salient features include -
- Precise double regulation
- Tamper-proof setting, with handwheel or lockshield
- Low flow-noise emission
- With or without Drain Cocks
- With or without Pressure Test Cocks
- Positive shut-off
- Exceeds IS 778 - 1984
- Can eliminate separate Flow Measuring Device.
- Flanged in Cast iron for PN16, Ductile Iron for PN20
- Size from 3" upto 12"
- EPDM for Cast iron Construction.
- Economy in installation & Operation
-
Application
Installation Dimensions
Control And Shut - Up Flanged Valves.
As double regulating, balancing and shut-off valve in open or closed hydronic heating/cooling system and cooling water system in process industry for balanced flow. With special alloys, these valves can be used in Process Plants too for double regulation & flow measurement functions for balanced flow.
National Size DN mm (inch) 080 (3") 100 (4") 125 (5") 150 (6") 200 (8") 250 (10") 300 (12") A mm 310 350 400 480 600 730 850 Flange OD mm 200 220 250 285 340 405 460 B mm 290 410 450 490 590 760 820 C mm 170 222 222 290 385 538 538 Stroke mm 32 40 49 57 69 80 96 Handwheel Turns 8 10 12 14 13.5 12 14.5 Weight Kg. 27 42 60 84 165 377 460 Why Balancing Valves|Design Features|Flow Characteristics|Application|Installation Dimensions|Enquiry
S S Ball Valve Techno Make
Minimum Order Quantity: 1 Piece
Connector Type | Screwed |
Brand | L&T |
Material Grade | S S 304 & 316 |
Material | Brass, Stainless Steel |
End Connection Type | Screwed |
Size | 1/2" TO 24 " |
Valve Size | 1/2" TO 12 " |
Media | Air, Fuel, Gas, Water |
Automation Grade | Manual |
Threaded | Yes |
Product Specification
Size | SIZE 1/2 |
Media | Air, Water, Gas, Fuel |
Material | Brass, Stainless Steel, Plastic |
Branded (Y/N) | Yes |
Temperature of Media | Low Temperature , Medium Temperature , Normal Temperature |
Automation Grade | Manual |
WOG Rating | 150, 300, 600 |
Condition | New |
Threaded | Yes |
S S 304 OR 316 BALL VALVE | ||||
APPLICATION | ||||
Replace gate valves, Suitable for industrial, pneumatic domestic and hydraulic installations, water and air lines. | ||||
INSTALLATION | ||||
The end threads are parallel, over tightening while installing would not aid better sealing. It is advisable to sue sealing medium like Teflon tape for a leak tight joints. Excessive torque should be avoided as this could cause the ends to crack. | ||||
OPERATION | ||||
All valves are supplied with levers fitted for quarter-turn operation. These levers are adjusted for open/close positions and should not be disturbed. | ||||
END CONNECTION | ||||
Valves are offered with Female/ Female BSP threads. | ||||
Additional Information
Port Of Dispatch | MUMBAI |
Payment Terms | L/C (Letter of Credit)/T/T (Bank Transfer)/D/P/D/A/NEFT CASH CHEQUE |
Cast Iron Sluice Valve Kirloskar & ZOLOTO MAKE
Size | 2 " TO 12 " |
Media | Air, Gas, Powder/Solids, Fuel, Water |
Color | Blue, Black |
Automation Grade | Manual |
Temperature of Media | Normal Temperature, High Temperature, Low Temperature, Medium Temperature |
Power | Hydraulic |
Material | cast iron with gun metal part |
Condition | New |
KIRLOSKAR Cast Iron Sluice Valve.
Size | 50 MM to 630 MM | ||||||||||||||||||||||||
Material | Cast Iron | ||||||||||||||||||||||||
Model Name/Number | ISI | ||||||||||||||||||||||||
Brand | Kirloskar | ||||||||||||||||||||||||
Valve Size | 50 MM to 630 MM | ||||||||||||||||||||||||
ColProduct Specification
| Black |
C I Globe Valve N D 40
Minimum Order Quantity: 1 Piece
Body Material | Stainless Steel |
Valve Type | N D 40 |
Material | Stainless Steel |
Media | Air, Oil, Gas, Water |
Size | 1/2" TO 24" |
Brand | Audco |
Connection Type | Flange |
Automation Grade | Manual |
End | Flanged End, Screwed Ends |
Pressure | Low Pressure,Medium Pressure,High Pressure |
Driving mode | Manual |
Number Of Handles | ONE |
Packaging Type | GLOBE VALVE |
Temperature | STD |
Power | Manual |
Design | N D 40 |
Color | BLACK & BLUE |
Number Of Hole | STD |
Condition | New |
C I Globe Valve N D 40 Product Specification
C I , C S Globe Valve Din
|
Thermodynamic Steam Trap
Minimum Order Quantity: 1 Piece
Size | 1/2" TO 8" |
Brand | Spirax |
Material | C S , BRASS, BRONZE,C I |
Pressure | AS PER STD |
Color | STD |
Ends | SCREWED |
Media | STEM |
S.S Investment Casting Thermodynamic Steam Trap
is designed by our experienced professionals as per the quality norms set by the industry. It is offered in various sizes ranging from 15mm To 25mm. The trap is also fabricated to match the technical specifications provided by the clients.
Technical Specification:
-
Model: NVIL 41
- M.O.C: CA15/ CF8/CF8M
- Glass: Toughened Borosil
- Trims: 13cr./AISI 304
- End: Screwed B.S.P
- Max. Inlet. Pr: 32kg/ Square cm
- Min. Inlet. Pr: 0.25kg/ Square cm
- Size: 15MM To 25MM
Globe Valve Flange End ASA 150 C F A 8 m S S 316 QUALITY
Minimum Order Quantity: 1 Piece
End | Flanged End, Screwed Ends |
Driving mode | Electric, Hydraulic, Manual |
Automation Grade | Manual |
Fluid Media | Water, Air, Gas |
Connection Type | Thread |
Condition | New |
SIZE 1/2" TO 12 "
Cast Iron Sluice Gate Valve KARTAR MAKE
Minimum Order Quantity: 1 Piece
Size | 4 inch |
Usage/Application | Industrial |
Pressure | High Pressure |
Valve Size | 2" TO 24 " |
Brand | KARTAR MAKE |
End Connection Type | Flanged |
Automatic Grade | Semi-Automatic |
Voltage | STD |
Media | Water |
Temperature Of Media | High Temperature |
Material | FLANGED END |
Cast Iron Sluice Gate Valve KARTAR MAKE
Surface Finishing | Color Coated |
Usage/Application | Water, Oil, Air, Fire fighting applications, Marine applications |
Automation Grade | Manual |
Brand | Kartar |
Color | Blue |
Material | Cast Iron |
With the valuable assistance of skilled team of professionals, we are engaged in offering an extensive range of high-quality Cast Iron Sluice Valve.
Features:
- Generally in non rising stem design
- Available in outside yoke type rising stem
- Flanged ends
- Handwheel, cap or gear operated
- Available in PN10 & PN16
- ISI Marked as per IS:14846
- Available in CL125 as per BS:5163
- Available in reselient seating as well as metal seating
Working & Test Pressure:
- Sluice Valve PN 1.0 Sluice Valve PN 1.0 Gate Valve CI 150
- Hydrostatic Test (Mpa) Body / Shell 1.5, 2.4, 3.0
- Hydrostatic Test (Mpa) Seat 1.0, 1.6, 2.2
- Pneumatic Test (Mpa) Seat NA, NA, 0.7
- 1 Bar = 0.1 Mpa = 1.019 Kg.cm2 = 14.50 PSI
Bronze Globe Valve, QINN MAKE ,
Minimum Order Quantity: 1 Piece
Product Brochure
Media | Water |
End Connection Type | Flange |
Valve Type | W J , QINN, SANT, ZOLOTO |
Size | 1/2 " TO 12 " |
Color | Transparent, Natural |
I Deal In | New Only |
Condition | New |
Cast Iron Globe Steam Stop Valve,
Q-53 Qinn BRONZE GLOBE VALVE ISI Marked Class-1
- Current Stock : 100
ISI MARKED TO IS:778, CL-I
PRODUCT DETAILS
SCREWED IN BONNET, INSIDE SCREW, INTEGRAL SEATING RISING STEM & BACK SEAT ARRANGEMENT WITH STURDY HAND WHEEL OPERATED.
END DETAILS
SCREWED FEMALE ENDS BSP TO BS:21/IS:554
WORKING
SUITABLE FOR NON-SHOCK HYDRAULIC LINE TEMP. UP TO 45° C.
TESTING
HYDRAULIC
BODY TEST PRESSURE :- 1.5 Mpa
SEAT TEST PRESSURE :- 1.0 Mpa
MATERIALS OF CONSTRUCTION | ||||
PART NO. | PART'S NAME | MATERIALS | SPECIFICATIONS | |
1 | NUT | CARBON STEEL | BS:916 | |
2 | WASHER | CARBON STEEL | ----- | |
3 | HAND WHEEL | C.I. | BS:1452,Gr.220 | |
4 | STEM | BRASS | BS:2874,CZ114 | |
5 | GLAND NUT | BRONZE | BS:1400,LG2 | |
6 | GLAND BUSH | BRONZE | BS:1400,LG2 | |
7 | GLAND PACKING | ASBESTOS | ----- | |
8 | BONNET | BRONZE | BS:1400,LG2 | |
9 | SEAT NUT | BRONZE | BS:1400,LG2 | |
10 | BODY | BRONZE | BS:1400,LG2 | |
11 | SEAT | BRONZE | BS:1400,LG2 |
Cast Iron Vertical Inverted Bucket Type Steam Trap
Minimum Order Quantity: 1 Piece
Product Brochure
Material | C I ,C S , F S |
Pressure | std |
Valve Size | More than 4 inch |
Brand | Qinn Make CAST IRON VERTICAL INVERTED BUCKET TYPE STEAM TRAP |
Size | SIZE 1/2 |
Finishing Type | c i |
Media | stem , water |
Model | Q-209 |
Cast iron vertical inverted bucket type steam Trap
Pressure | TEST PRESSURE - BODY - 300PSIG(HYD) |
Model Name/Number | AV260 |
Size | 15MM TO 50MM |
Brand | ATAM |
Material | Cast Iron |
Minimum Order Quantity | 1 |
With renewable Stainless Steel working parts
Screwed Female BSP Parallel Threads as per BS-21
Test Pressure
Body : 300 Psig (Hyd.)
Working pressure suitable saturated steam upto 150 Psig
product details :- inverted bucket type, vertical installable, with ss-304 working parts.
end details :- screwed female ends bsp parallel to bs:21
testing :- 300 psig. (shell test) hydraulic.
working pressure :- maximum b. O. P. 10 bar materials of constructionpart no. part's namematerialsspecifications1plugbronzebs:1400 lg22covercast ironbs:1452 gr2203nut & boltcarbon steelbs:9164valve seats. S. Aisi-3045ball seats. S. Aisi-2026e-clamps. S. Aisi-3047buckets. S. Aisi-3048bodycast ironbs:1452 gr2209bucket ringcast ironbs:1452 gr22010hooks. S. Aisi-30411valve levers. S. Aisi-30412gasketc. A. F. -----13bucket hooks. S. Aisi-30414syphon pipemcibs:10242 dimensions in mmnominal size∅b∅al+1. 515mm1/2' bsp1/2' bsp21020mm3/4' bsp3/4' bsp21025mm1' bsp1' bsp27532mm1. 1/4' bsp1. 1/4' bsp31240mm1. 1/2' bsp1. 1/2' bsp38850mm2' bsp2' bsp440
Cast Iron Ball Type Non- Return Valve Normex Make
Minimum Order Quantity: 1 Piece
Material Type | Cast Iron |
Size | 2" TO 18 " |
Brand | NORMEX |
Valve Size | 2 " TO 18 " |
Media | Water, Gas, Air |
Pressure | High Pressure, Medium Pressure, Low Pressure |
Features | STD |
Condition | New |
Usage/Application | WATER |
Connection Type | SCREND END & FLANGED END |
Corrosion Resistance | STD |
Diameter | 2" TO18" |
Finishing Type | STD |
Color | Blue |
Maximum Working Temperature | STD |
Nominal Diameter | STD |
Nominal Pressure | STD |
Normex Cast Iron Ball Check ValveSIZE 2" TO 18 "
Ball Type Check Valves (NRV) B-01 was the first of the valve at Normex with unique design and technology for the first time in India. A very simple and robust design with no mechanism involved. The heart of valve is rubber coated ball. The mechanism hinge-pin-disc used in conventional check valves is eliminated and Normex has put in this rubber coated ball to arrest flow media in return condition. As the pump starts, the ball moves out totally from the flow path when the pumping is on giving a full bore maximum flow/discharge with minimum head losses. (Fig. A). As the pump stops, the ball rolls back and seats perfectly on the rounded valves seat ensuring totally leak proof sealing.(Fig. B) Salient Features:
Applications: Clean water, Raw water, Sewage, Slurry, Waste water, Viscous liquids etc. Used in industries like: Fire fighting, Plumbing, Water distribution, Water/Sewage treatment, Irrigation/agriculture, Sewage plants, Steel mills, Power stations, |
||
|
||
C I Slimseal Butterfly Valves Audco Make
Minimum Order Quantity: 1 Piece
Brand | AUDCO , L & T |
Size | 2 " TO 24 " |
Material | C I |
Operator | Lever, Electric Actuator |
Media | Water, Air, Fuel, Gas |
Temperature of Media | High Temperature, Medium Temperature, Low Temperature, Normal Temperature |
Operation Type | By Motor, By Gear, By Lever, By Actuator |
Is It Customized | Customized |
Condition | New |
The Audco Slimseal is a wafer type butterfly valve with an integrally bonded elastomer liner. Requiring absolutely no form of maintenance the Slimseal is a perfect "fit and forget" valve.
Available with flangeless, lugged or flanged body, in a size range of 50-900 mm, a pressure rating of up to PN20 and offered with latching lever or actuation as well as different combinations of disc and seat materials, the Slimseal is truly versatile valve.
C I Butterfly Valve
Product Brochure
Brand | Audco & L - T |
Operator | Lever, Electric Actuator |
Valve Size | 2 " TO 12 " |
Media | Powder/Solids, Water, Fuel, Air, Gas |
Temperature of Media | Low Temperature, Normal Temperature, High Temperature, Medium Temperature |
Operation Type | By Gear, By Actuator, By Lever, By Motor |
Is It Customized | Customized |
Condition | New |
C I Butterfly Valve
are designed & manufactured to have optimum mix of structural stability, flow efficiency & effective seating coupled with advantage of light weight, compact design and ease of operation. Only a quarter turn is needed to fully open or close the valves.
The salient features include :-
Fit n Forget' Butterfly Valve – internally molded liner
2” to 24”
Upto ANSI # 150
From – 50° to 205° C
End connection in Wafer, Lugged & Flanged Model
Lining and metallurgy to suit a wide variety of applications, including sea water & water desalination plant
Seal type (EPDM, Buna N, Viton)
Standard compliance with API 609 & 598
Design Features | Construction Features | Facilities (operators) | Application | Installation Dimension
Cast Steel Flanged End Swing Check Valve
Minimum Order Quantity: 1 Piece
Size | 2 " TO 12 " |
Material | Carbon Steel, Stainless Steel, Mild Steel |
Product Type | Cast Steel Flanged End Swing Check Valve |
Valve Size | 1" TO 24 " |
Media | Air, Fuel, Powder/Solids, Water, Gas |
End Connection | FLANGE END |
Pressure | High Pressure |
Condition | New |
Cast Steel Flanged End Swing Check Valve.
Features:
Excellent strength
Anti-corrosive
Perfect design
Specifications:
Design & Manufacturing : BS 1868
Testing Standard: API 598
Material : A216 GR. WCB, A351 GR. CF8, CF8M, Duplex Steel, Etc.
CI MS, SS-304/316 add this in content as material
Class : ASME B16.5 CL.150#
Suitable Medium : Petroleum, Chemical, Pharmaceutical, Chemical For lizard And Electric Power Industry
Flanged End : ASME B16.5
Face to Face : ASME B16.10
Operation : Self
Technical Specifications:
DescriptionMaterial WCBMaterial CF8Material CF8MPcsBodyASTM A216 GR. WCBASTM A351 GR. CF8ASTMA351 GR. CF8M1CoverASTM A216 GR. WCBASTM A351 GR. CF8ASTM A351 GR. CF8M1HingeASTM A216 GR. WCBASTM A351 GR. CF8ASTM A351 GR. CF8M1Seat RingCS+13%CR. FACINGASTM A351 GR. CF8/SS304ASTM A351 GR. CF8M/SS3161DiscCS+13%CR. FACINGASTM A351 GR. CF8/SS304ASTM A351 GR. CF8M/SS3161Disc Retaining NutA-276 TP410AISI SS-304AISI SS-3161Disc WasherA-276 TP410AISI SS-304AISI SS-3161Hinge PinA-276 TP410AISI SS-304AISI SS-3161Cover GasketCOM.ASB.FIBRE/PTFECOM.ASB.FIBRE/PTFECOM.ASB.FIBRE/PTFE1Cover StudA-193 GR.B7A-193 GR.B8A-193 GR.B8REQCover NutsA-194 GR.2HA-194 GR.8A-194 GR.8REQ
Wafer Check Valve
Minimum Order Quantity: 1 Piece
Size | 1 " TO 12 " |
Material | Cast Iron, Stainless Steel |
Brand | ZOLOTO, QINN, HAMMER, SANT,LEADER |
Material Grade | C I & S S |
Media | Powder/Solids, Fuel, Gas, Air, Water |
Valve Size | 1" TO 12 " |
Condition | New |
Product Specification
Size Range | D63 mm to D315 mm (2"- 12") |
Pressure Rating | PN 16 (max) |
Operating Temperature Range | -500 C to 2000 C (depending on MOC) |
Minimum Return Pressure | 0-2 bar (3 psi) |
Technical Specifications:
- Valve Type: Self-acting non-return valve.
- Description: Single plate wafer type swing check valve.
- Body Type: Short pattern wafer type
- Disc Type: With integral hinge pin
- Model nomenclature: IVC-check valve with rubber O-ring seat and face sealing
- IVCT-check valve with PTFE seat and serrated contact faces
- Seat Leakage: Zero leak / tight shut off
Standard Material of Construction (MOC):
- Body: SGI/WCB/CF8/CF8M/CS-IS 2062
- Disc: SGI/WCB/CF8/CF8M
- Seat: EPDM/Viton/Nitrile/Neoprene/Hypalon-for IVC
- PTFE or GFT-for IVCT
Product Image
Single Disc Check Valves S S 304 /316
Minimum Order Quantity: 1 Piece
Brand | RACER |
Usage/Application | Industrial |
Valve Size | 1/2" TO 24 " |
Finished Type | STEEL |
Shape | Single Disc |
Packaging Type | STD |
Design Type | DISC |
Size | 1 " TO 8" |
Media | Water, Air, Gas |
Pressure | Medium Pressure, High Pressure, Low Pressure |
Condition | New |
Certification | EIL, IBR |
Material | Stainless Steel |
Single Disc Check Valves
Product SpecificationBrand | Racer |
Size | 15mm To 200mm |
Model | Disc Check Valves |
Material | Mild Steel |
Design Standard | BS 7438:1991 |
Sizes | 15 mm - 100 mm |
Type | Wafer - Suitable for vertical, Horizontal or Inclined Installation |
Rating | CI 150 and 300 |
Material | SS 304 (CF8), SS 316 (CF8M) |
Features | Simple, Compact and Effective. |
MS Wafer Check Valve
Minimum Order Quantity: 1 Piece
Material | Stainless Steel, Cast Iron, Aluminum |
Brand | QINN/ HAMMER,SANT |
Size | 1" TO 8" |
Media | Water, Fuel, Air, Powder/Solids, Gas |
Condition | Refurbished |
Power Source | Pneumatic, Hydraulic, Manual |
Power | Hydraulic,Manual,Pneumatic |
Seat Test Pressure | M s wafer check valveBody m sDisc m sMFG STD gen. Conf. to API 6DEnd Wafer typeHyd. Test press.Body 16kgSeat 11.5kgTemperature 100cSize 1.1/2" to 12" ready stock |
Automation Grade | Automatic |
M S wafer check valve
Body m s
Disc m s
MFG STD gen. Conf. to API 6D
End Wafer type
Hyd. Test press.
Body 16kg
Seat 11.5kg
Temperature 100c
Size 1.1/2" to 12" ready stock
Bronze Horizontal Lift Check Valve.
Minimum Order Quantity: 1 Piece
Product Type | Bronze Horizontal Lift Check Valve. |
Material | Brass/Bronze |
Valve Size | 1/2" TO 6" |
Media | Gas, Water, Air, Powder/Solids, Fuel |
End Connection | Screwed |
Certification | IBR |
Condition | New |
Cast Iron Accessible Feed Check Valve, Gun Metal Vertical Check Valve, Cast Iron Angle Check Valve, Cast Steel Horizontal Lift Check Valve and Cast Iron Dual Plate Check Valve
Product Details:
Testing | Hydraulic |
Body Test Pressure | 1.5 Mpa |
Seat Test Pressure | 1.0 Mpa |
Brand | Qinn |
Temperature (Degree Celsius) | Upto 45 degree C |
Pressure | 1.5 Mpa |
Application | Water, Oil |
Detail:
- ISI Marked To Is:778 Cl-1
View More